Question about 2002 Mercury Grand Marquis

1 Answer

How do I replace a faulty winshield wiper switch in my 2002 Mercury Grand Marquis?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

You will have to remove the covers on top and bottom of steering column just before steering wheel. There will be T25 Safety Torx screws, and 2 plugs holding it in there, remove and replace, and re assemble as it came apart.

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Troubleshooting wipers


It is probably a bad wiper module.

Aug 24, 2014 | 2005 Mercury Grand Marquis

1 Answer

1997 mercury grand marquis wipers


We have the same problem on our 97 Grand Marquis. We have replaced the wiper blades and the drivers wiper arm with a used one. The problem was not completely solved but it did work better. We are going to replace the arm with a new one and see if that works better.

Oct 25, 2011 | 1997 Mercury Grand Marquis

1 Answer

2002 Gran Marque windshield wipers won't park


the park switch or the relay has gone bad in the wiper motor

Mar 09, 2011 | 2002 Mercury Grand Marquis

1 Answer

1996 Mercury Grand Marquis - wipers will not work. Have check multifunctional switch and motor. Both ok.


if motor and switch are ok and the motor is running, then it's the ball joints on the arms that have become disconnected underneath the windshield in the firewall vicinity. Also, the wiper arms could be stripped out.

Jul 03, 2010 | 1996 Mercury Grand Marquis

2 Answers

Wiper speed control for a '97 Mercury Grand Marquis. What causes the wiper to work on high speed only?


Intermittent wiper control stopped working on my 1996 GM last spring. I ended up replacing the wiper motor ($100.00 part). Since I have found it on Amazon for $58 including shipping. It works fine now. Only bad part was all the "stuff" that has to come out (like dead leaves!) to get to the wiper motor. Also make sure you have your wipers in the down position when you replace the motor.
Hutch50

Sep 28, 2009 | 1997 Mercury Grand Marquis

1 Answer

I have a 2005 Mercury Grand Marquis and I can't turn the wipers.


this is a very common problem on these vehicles. the wiper motor has a park switch built into it that fails. replace the wiper motor and this will stop problem. hope this info helps you!

Sep 22, 2009 | 2005 Mercury Grand Marquis

1 Answer

Winshield wiper slow to fast switch


The part is about $100-125, it takes about 1 hour to replace, so cost will be around $200.00 at dealer.

Sep 02, 2008 | 2003 Mercury Grand Marquis

Not finding what you are looking for?
2002 Mercury Grand Marquis Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...