Question about GMC Jimmy

1 Answer

2000 Jimmy - starts but can't shift into gear - can't push button in

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

Check ALL the fuses !!! Does the brake lights work? if not,, the shift inter lock may be disabled ,,, if the lights work the interlock solenoid might be the culprit . You should be able to get in gear by turning the ignition switch off then turning to the first selection ,,don't turn it untill the dash lights come on ,,with the key in that position you should be able to shift the lever to put it in gear ,,,,dont move the key untill its in the correct gear

Posted on Mar 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 97 Jimmy is shifted into 4hi and will not switch to 2hi, the lights flash and i hear a clicking but it wont shift


when deactivating youre four wheel drive make sure youre rig is in nautral this helps with the gears lining up. whan youre 2-hi light flashes hit a second time. Ive had this problem befor.

Jan 12, 2013 | 1997 GMC Jimmy

1 Answer

2000 GMC Jimmy 4x4 Switch not working and Shifting hard between 1st and 2nd


Change the switch itself if it drives normal then randomally kicks into 4 lo/4 hi i had the same problem and a transmission shop told me it was the vaccum and the transfer case but one of my mechanic friends told me that it was my switch and shops only tell you other things for the money. Try changing the switch.

Aug 12, 2012 | 2000 GMC Jimmy

1 Answer

Shifted into four wheel drive. went to shift back in to 2 hi and now the transmisson wont shift


my 99 jimmy shifts into 4lo all the time.
1. Turn truck off
2. set parking brake
3. start truck and shift into neutral
4. push 2hi button(should shift back)
put back in park,release brake
might work for you

Dec 25, 2009 | 1998 GMC Jimmy

1 Answer

My 2000 gmc jimmy is stuck in 4low how do i get it out pushing other buttons does'ent work


Try putting the vehicle in neutral at a full stop. Then push the buttons-it should shift to the selected gear. Then go back into reverse or drive.

Jul 04, 2009 | 2000 GMC Jimmy

3 Answers

2001 jimmy stuck in 4wd low


Usually when a truck gets stuck in 4 low you need to put it in reverse, start backing up very slowly, put it in neutral (or push in the clutch on manual trans models) and stop the truck with the brakes. this will release the load on the gearing which should allow you to shift out of 4 low.

Feb 15, 2009 | 2000 GMC Jimmy

2 Answers

Where is my 1 2 shift sensor 2000 gmc jimmy


Inside trans. pan at the rear of the valve body. They have a wire clip which holds them in.

Jan 21, 2009 | 2000 GMC Jimmy

1 Answer

On my 2000 chevy S10 blazer, when I push the 4HI button, the 4HI and 4LO buttons flash a yellow light and it won't shift to 4WD, stays in 2HI and the light in the 2HI button is on yellow......I hear...


vacuum leak or vacuum locker solenoid problem. a great way to check for both is to remove both vacuum lines from the solenoid (located on firewall above destributor), and put a connector between them, push the button on the dash and see if it locks in.

Jan 18, 2009 | 1999 GMC Jimmy

1 Answer

Won't shift into 4 wheel drive mode at all / 2000 GMC Jimmy SLT


I have had the same problem with my 2000 jimmy. Disconnect the battery for approx 1 minute and then reconnect, this should reset the computer. It has worked for me every time. I was told it was a glitch with GMC.

Dec 24, 2008 | 2000 GMC Jimmy

2 Answers

Can't get gear shift to come out of park


clicking noise is btsi solenoid, check linkage at trans for binding

Nov 17, 2008 | 1998 GMC Jimmy

1 Answer

Intermittent 4wd on 98 jimmy


the module is what i would suspect. and i do believe it is in the r kick panel. i've seen the button pack on dash go bad too, but module is best bet.

Nov 14, 2008 | 1998 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...