Question about 1992 Oldsmobile Cutlass Ciera

1 Answer

CRANK SENSOR LOCATION FOR 1992 OLDS CUTLASS CIERA

Posted by on

  • FUBAR Mar 15, 2011

    Is yours the 4 or 6 cylinder?

  • honeymokey
    honeymokey Mar 15, 2011

    Engine size for 1992 Ciera

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 1,975 Answers

That year Ciera came with two diiferent engines. if you have the 2.5 liter engine it is located under the hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block. If it is the 3.3 liter engine it is located under the hood, passenger side, lower engine area, front of crankshaft pulley, mounted in engine block. i hope this helps you and good luck.


Posted on Mar 15, 2011

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

roniecon
  • 6826 Answers

SOURCE: crank pos sensor adjustment on 90 olds cutlass

You have got to space it by feel,so it does not touch either side of the reluctor plates,check the balancer reluctor plates to make sure they are not bent,and the balancer is not coming apart in the rubber part.

Posted on Apr 01, 2010

Testimonial: "helpful- will give a try.. Thanks."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is crank sensor on 1989 olds cutlas ciera


if its a v6 it is located behind the crankshaft balancer.

Aug 14, 2014 | 1989 Oldsmobile Cutlass Ciera

2 Answers

My Oldsmobile Cutlass Ciera with the 2.5 will not stay running


What you should do when it stalls is check to see if your loosing spark at the plugs.If you are then you probably have a bad ignition module.It is located in the rear of the motor.The ignition coils are mounted on it.One other possibility is the pcm.It is located under the dash on the passengers side.You can get a used one at most salvage yards.You will need to get the number from the old pcm.You will also have to remove the old prom from the old pcm and install it in the one you get for replacement.Hope this helps.Good luck.

Jun 08, 2010 | 1989 Oldsmobile Cutlass Ciera

1 Answer

My 1993 cutlas supreme stalls randomly while idling or driving , but restart right away


You will need to change the crank position sensor first and see if it corrects the problem. It is located behind the engine near the firewall. It's a bit tricky to get to it, you would need to rotate the engine forward then look under the exhaust manifold and under the cylinder closest to the drivers side. Use a 10 mm deep socket to loosen bolt. After replacement and it is still stalling then you will need to replace the ECM (vehicle computer). If it turns out to be the computer, go to your local junkyard to get an inexpensive replacement Click on the link below to view the CPS, it is around $22

http://www.partstrain.com/store/?N=0&Nr=AND(make:Oldsmobile,model:Cutlass+Supreme,year:1993,brand:Delphi,part:Crank+Position+Sensor)&ptc=S1171391678W45d204bec356b&ptid=ptc45891f6tnywz&id=Olqtv7cphi





Olds-Cutlass-Ciera.htm">http://en.allexperts.com/q/Oldsmobile-Buick-Repair-826/f/1992-Olds-Cutlass-Ciera.htm

Apr 12, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

Crank pos sensor adjustment on 90 olds cutlass


You have got to space it by feel,so it does not touch either side of the reluctor plates,check the balancer reluctor plates to make sure they are not bent,and the balancer is not coming apart in the rubber part.

Apr 01, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Where is the sensor / harmonic balancer?


LOOK ON THE REAR OF THE MOTOR ON THIS YR. MAKE AND MODEL. THE CRANK POSITION SENSOR TELL THE CAR WHEN TO SPARK. THANKS FOR USING FIX-YA AND FOR AN HONEST RATING/COMMENT.

Sep 05, 2009 | 1991 Oldsmobile Cutlass Ciera

2 Answers

Where is crank position sensor on 92 Oldsmobile 3.3 litre and how do I test it


its located right behind the balancer. remove the balancer you will see the shield remove the shield and the sensor is located right behind it secured by a bracket.

Jul 20, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Where is the coolant sensor switch ??


FAN SENSOR SWITCH IS LOCATED ON ENGINE BLOCK BELOW THE ALTERATOR , IT HAS A 2 WIRE PLUG ATTACHED TO IT.

Jun 05, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

1992 olds cutlass ciera keeps stalling out is there a main relay switch or ignition module switch that can be replaced? Where is it?Anyother ideas what could cause it to start, drive a few blocks, then...


could be a crankshaft position sensor located on the back side of the engine. There is a two wire plug on it and should be close to the freeze-out plugs. you will need an 8mm wrench to remove it.

Apr 22, 2009 | 1992 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1992 Oldsmobile Cutlass Ciera Logo

849 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...