Question about Buick LeSabre

1 Answer

I want to replace the oil pumpin a 1996 buick lasbre. need diagram

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,102 Answers

Removal:

  1. Disconnect the negative battery cable.
  2. Remove the front cover from the engine.
  3. Remove the oil filter adapter, pressure regulator valve and spring.
  4. Remove the oil pump cover-to-front cover screws and the cover. Remove the inner and outer pump gears.
Installation:
  1. Using petroleum jelly, pack the pump and assemble the gears in the housing.
  2. Tighten the oil pump cover-to-front cover screws to 97 inch lbs. (11 Nm).
  3. Install the pressure regulator spring and valve. Install the oil filter adapter.
  4. Install the front cover to the engine.
  5. Connect the negative battery cable.

I want to replace the - chuckster57_26.gif

Posted on Mar 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i replace my 1992 Buick Lasbre window motor with a 2005 Buick Lasbre window motor


Does it look the same ? Same amount of fasteners ? Wire connector look the same , same number of wires . I would say probably not . Buy a new one .

Feb 23, 2017 | Buick Cars & Trucks

1 Answer

2005 Buick Lasbre window motor fit 1992 Buick Lasbre window motor


Call a salvage yard in your area. They can give you the answer to your question. You have asked this question multiple times, but we would have to do the same thing - call a salvage yard. You have all the details on your car - you call them.

Feb 23, 2017 | Buick Cars & Trucks

1 Answer

My Buick lasbre 2002 is showing over fill on transmission fluid. What could cause this and what will fix problem?


check manually that there is an overfill, if so drain some oil/transmission fluid.
I would just leave it alone to be honest....if there is excessive wear on the trtans the extra fluid may protect it.
If in doubt check with a local transmission specialist

Aug 01, 2015 | Buick Cars & Trucks

1 Answer

Need a diagram to connect orang and yellow wires to check uf car will start on a Buick lasbre 3800, 1992


You need a wiring diagram to join a yellow and an orange wire together? Most people who aren't attempting to steal a vehicle use the correct key. Or am I missing what you are trying to ask as there is so little information in your question?

Aug 03, 2014 | Cars & Trucks

1 Answer

1992 buick lasbre replaced crank shaft sensor and now seems out of time and will not start


You may end up spending a lot of money on parts you might not need. find a mechanic.

Aug 03, 2014 | 1992 Buick LeSabre

1 Answer

I need a diagram for replacement of a 1996 buick Rivera 3.8 serpantine belt


Below is the diagram you requested. Best of luck!

1996 Buick Riviera Serpentine 3.8

greg_margo_3.jpg

Mar 19, 2011 | 1996 Buick Riviera

1 Answer

My heads r no pumpin oil wat can be my problem i change the pick up line and the filter !!!


WELL IF OIL NOT PUMPING AT ROCKER ARMS.IF HEADS BEEN REMOVED YOU HAVE TO ADJUST VALVE LASH AT ROCKER ARM AND PUSHROD TO THE LIFTER BEFORE IT PUMP OIL.IF ENGINE HEADS HAS NOT BEEN REMOVED.OIL NOT PUMPING.POSSIBLE CAUSE RESTRICTED OIL PASSAGES OR WORN OUT VALVE LIFTERS AND CAMSHAFT LOBES.FAULTY OIL PUMP REGULATOR OR WEAK OIL PUMP.

Aug 06, 2010 | 1995 Buick Regal

1 Answer

To replace lock up silanode in transmission on 1995 buick lasbre. Do I need to drop the engine.


thats the easiest way, you have to remove the transmission side cover to gain access to the valvle body and dropping the engine and transmission from the bottom is the easiest way to get at it.

Jan 02, 2010 | 1995 Buick LeSabre

1 Answer

Serpentine belt replacement


need to see diagram for serpentine belt installation on 19991 buick lasabre

Dec 27, 2009 | 1996 Buick Riviera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...