Question about 2000 Ford Focus

2 Answers

I just had the cluch changed and now i have problem shifting gears.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

If the clutch is not fully disengaging, you will have a problem getting it into gear and shifting. I would call the installer of the clutch and explain the symptoms. It might just need an adjustment

Posted on Mar 15, 2011

  • janebell1968 May 23, 2011

    how do adjuste it can you send me a pich so i now how i can do it
    the reg is S ford escourt . the clutch is not working at all well

×

Can't help here, and there is no reason for the
problems your having

You paid good money for professional service
and still got issues

I can only say go back to the same place

I would only be critical, not knowing what was done,
but I suspect the shop had the same problems
you are experiencing, and gave you the car back
anyway

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gear is stiff and experiencing a difficulty when engaging second gear. other gears seems to be fine but the shifting is not smooth.


I suspect that it will be in the shift mechanism
If it is a cable shift then replace the cable
If it levers or other linkages check and adjust or lubricate as required
I doubt it is in the clutch as you haven't mentioned difficulty in selecting first gear only shifting from 1 to 2nd.

Jun 21, 2015 | Opel Corsa Cars & Trucks

1 Answer

We just bought a 2000 Suzuki esteem, the problem is whenever we start the car, it becomes very difficult to shift between gears when the car is idle, but when the car is on the freeway, shifting works...


The cluch not fully disingaging , ( carpet under the pedel, pedel bent , bushing worn out of pedal, low on fluild in clutch master ( brake fluid ) and bad cluch master or slave or air in system. A damaged clutch will drag too. If it shifts OK with the car shut off standing still trans lube is likly OK too. If it has a clutch cable it may need to be adjusted pull up on the clutch pedal as high as it can go then pust down with your hand it should only go down an inch before it gets harder to pust down as it openes the clutch and shoul continue to go down about 4 or more inches. The pedal should be as high or a little higher than the break paedal. If not the pedal height may be needing to be adjusted higher. Some slave master hydrolic sysems aren't adjusted and have to be replaced to fix lack of enought movement Clutes that are hard to pust in or get much harder as you get closer to the floor the cluch is likly to be worn out and need to be changed with a new clutch kit and resurface the flywheel. The flywheel can change to unflatand the cluch can drag. engine oil getting into the clutch though a leak in the valve cover or rear main can get on the cluch and make it drag and grab.

Mar 21, 2010 | 1996 Suzuki Esteem

1 Answer

Hard shift into any gear after clutch pressure loss No previous problem with shifting prior to this , with good clutch pressure and smooth shifting into all gears.


clutch plate is worn out cluch is good just needs cluch plate but you might as well buy the clutch kit and change it all to avoid future problems

Dec 22, 2009 | 1993 Saturn SL1

3 Answers

88 Toyota Pickup, has become difficult to shift in to gear. Once in gear (1,2,3,or4th) very smooth. I believe must be something up front in the clutch linkage. Possibly? Can get into, but takes awful...


if your linkage was bent it wouldnt shift into all gears easily.sounds like you need to blead your slave cylinder to your clutch.10mm wrench and bleed it like your brakes same type set up.

Nov 24, 2009 | 1988 Toyota Pickup

1 Answer

1987 porche 924 cluch problem


Hi. your pressure plate is going bad at this time. you will need to replace this part asap.

May 23, 2009 | 1987 Porsche 944

2 Answers

2002 Sunfire


check automatic adjuster on clutch pedal under dash .

May 08, 2009 | 1997 Pontiac Sunfire

1 Answer

Transmission is not shifting when i take off it just stays in first gear


it may be the shift solenoids, or the cluches between the gearing.

Apr 17, 2009 | 1994 Chevrolet S-10

1 Answer

92 toyota camry 5speed


it sounds like you ground the spacers between the gears. have a look under the gear shift. pull the gear shift off then look at the transmission spacers. you will see where the gear shift sits see if some spacers look like the rest.

Mar 04, 2009 | 1992 Toyota Camry V6

1 Answer

Cluch won't dis engage


How long have you had your car? How many miles on it?

Maybe the clutch plate gone, if the plate is not thick enough, you won't change the gear.

Jul 06, 2008 | Mazda MX-5 Miata Cars & Trucks

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...