1 insert the key 2 press and hold both the "reset" and "select" buttons on the dash to the right side of the streering wheel 3 turn the key to on position, holding the button in but do not start the car 4 wait a (few seconds) until the maintenance req'd light goes off 5 start the car keeping the button depress 6 release the button after the car is started 7 done
Odometer does not work any ideas
Try removing the battery cables for at least 2 minutes and see if that doesn't clear it then if that doesn't work take it to your local auto parts store they might be able to do it for you.
SOURCE: how to reset maintenance warning light on acura
look in your owner manual to see if it tell you how if you do not have one try this website to see if you can down load one www.edmunds.com and you can try taking the postive side off the battery for about 3secs make sure it not going to set a code to lock out your radio.here is another website www.alldatadiy.com
SOURCE: Maintenance light blinks several times when I turn
this may mean its time for an oil change it's the cars way of saying it's time for a scheduled maintenance.
Turn the key off and push and hold the select button. Keep holding while you turn the key to the on position (not the start position) keep holding for about 15 seconds then turn the key back off . next turn the key back to on position the light should only come on once. now you can start the car
SOURCE: What maintenance is requied when the A1 light
A1 service, per the manual, is just an oil change and tire rotation.
Testimonial: "Thank you"
234 views
Usually answered in minutes!
×