Question about 1997 Ford Econoline

1 Answer

Blinder, head and tail lights stopped working on 2005 E-250. Need fuse diagram

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,763 Answers

Okay, look under the hood in the engine compartment and in that fusebox you will check fuse number f1-24. this is not like the older cars where it says park lights the newer cars and trucks are more confusing as the park lights run through modules so a fuse for another component can cause lights not to work but this is the fuse for the parklights if this doesnt do it then i would test all fuses in that box and then check fuses in the inside fuse box located on the leftside of the dash, as far as the headlights there are a few fuses that control the headlights one for each light and then one for the main switch these fuses are located inside the cab leftside of the dash fuses are f2-3, f2-10 , f2-25 , f2-31 check these for the headlights, here are some diagrams to help locate fuses.good luck and have a good day,blinder, head and tail lights - johnjohn2_83.gifjohnjohn2_6.png

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 e350 dash light and tail lights out what is fuse number


Head lamps work ? brake lights , back up lights , Park lamps up in the front of the vehicle work ? Dash an tail lights get power from headlamp switch . http://www.bbbind.com/free_tsb.html free wiring diagram's . Do you know how to do basic electrical testing ? Following a wiring diagram . Check fuse # 36 5amp located in the central junction box , inside the vehicle . Under the dash some where .

Feb 20, 2017 | Ford E350 Cars & Trucks

1 Answer

I have a 1994 Ford Explorer need to find out where the fuse box is to change out tail light fuse?


There is no fuse for the tail lights , Do the headlamps work ? Power for the tail lights comes from the headlamp switch ! Find yourself a wiring diagram an check the circuit ! You can find a wiring diagram here http://bbbind.com/free_tsb.html .Do you own a test light or a volt meter ? Do you know how to read a wiring diagram ? There are alot of videos on youtube on trouble shooting automotive electrical circuits , under standing wiring diagrams etc... Did they just stop working ? Do the stop an turn lamps work ?

Aug 18, 2016 | Ford Explorer Cars & Trucks

1 Answer

I need a fuse box diagram for a 1985 1.3 Opel Kadett Cub


I found these on a site I'm assuming they're in order from number 1
Layout Diagram Parts: Direction signal lamps, Right tail lamp, license plate lamp, instrument lights, Left tail lamp, Interior lamp, Heater motor, stop lights, Horn, windshield wiper
if the fuse is good and the wires are not broken or disconnected it may be the wiper motor is bad

Feb 18, 2015 | Opel Cars & Trucks

3 Answers

On the fuse chart, what is the abbreviation for the brake light fuse


Should all be the same fuze. Check the bulbs and whether the harness to the rear lights that usually runs through the trunk hasn't been pulled.

Jun 25, 2014 | 1998 Toyota Camry

1 Answer

2002 ford ranger tail lights and instrument cluster lights out


There are a total of six fuses that control exterior lights and dash lights. Check all of these Fuses: 10, 21, 3, 7, 13, 33
Does the high mount stop light work when you apply the brakes?

Jul 19, 2017 | 2002 Ford Ranger Regular Cab

1 Answer

None of my tail lights work. i changed the bulbs, tail light control board and fuses. I'm an electrician so i need a wire diagram of a 1996 chevy suburban


Your solution is a new combination switch,It also sounds like the hazard are activated and is non operation interfering with the brake light,but either way the solution is a combination swith

Jul 08, 2012 | 1996 Chevrolet Suburban

1 Answer

95 gmc yukon tailights not working


You can find wiring diagrams at http://www.bbbind.com/free_tsb.html free ! Enter your vehicle info. year , make , model an engine size . Under system click on lighting , subsystem click parking lights . Do the stop lamps work ? Turn signals etc.... Which fuse blows ? Also check fuse box diagram under power distribution ,fuse box .to see what all that fuse powers

Mar 25, 2017 | 1995 GMC Yukon

1 Answer

Tail lights and dash lights to1988 chevyare not working how do i fix


Yes it could be, check the inside fuse box. I would look up the fuse number but our fuse box diagrams only go back to 1993

Jan 27, 2012 | 1988 Chevrolet Silverado 2500

4 Answers

Dash and tail lights on a '91 Lincoln Town Car - quit working


From what you just said i dont belive the mechanic checked your fuses correctly.

Check your self to confirm, But if no avial i belive the controller for your lighting may be fried.

Feb 25, 2009 | 1991 Lincoln Town Car

Not finding what you are looking for?
1997 Ford Econoline Logo

1,261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...