Question about Ford Bronco II

1 Answer

I have a 88 Ford Bronco2.9Liter 4wheel drive Mitsubishitransmission. I need a diagram of tranny for the gears.

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

It's very simple starting at the front of the tranny going to the rear if it's a 4 speed
all of the gears except the input shaft (4th gear ) will be assembled on the main shaft ,,,
from small to large on the main shaft
the input shaft is the 4th gear , next is 3rd gear , next is 2nd gear, and then 1st gear is the largest

now the counter shaft in the bottom of the case ,,, it 's gear labeling will be backwards from large to small
like this

the front of the countershaft is large and mates with the small gear(4th)
the next gear is 3rd, then 2nd, then 1st,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, the gear thats mounted off the side in the case is the reverse idler

If its a 5 speed

the gears places above are the same and 5th gear is added to the rear of the main shaft (,the smallest gear,)

the gears on the countershaft are the same and 5th gear is the last gear on the countershaft( the largest gear on the counter shaft ) the single gear mounted off the side in the case is the reverse idler

hope this helps

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tranny has decided to become locked into some sort of gear but the stick itself won't go into gear..when I push the pedal in it puts the clutch into nuetral but the tranny is definetly locked...


The cross member has to come off. Either with a cutting torch or a socket, but it has to come off. The two bolts you can't reach can be removed with a long extention and a universal socket. You may need 3 feet or more of extention. Measure before you go to the tool store. You may also need help to line the socket up to the bolt. Good luck.

May 11, 2011 | 1991 Mitsubishi Mighty Max

1 Answer

Transmission apparantly went out on my 1996 ford exlorer(eddiebauer)6cylinder4.0 engine-just bought it in oct. of last yr. i was driving on I-5 for oabout an hour when it suddenly just popped...


I dont think you have a transmission problem , i believe you have a transfer case problem. These are repairable but sometimes is more cost effective to replace. I would offer my services but am way to far away for that to make sense. Let me know if there is anyway i can help.

Jan 20, 2011 | 1996 Ford Explorer

1 Answer

Need assistance with wiring


The RH (Passenger's) side Cylinders 1, 2, 3, and 4 The LH (Driver's side) Cylinders 5, 6, 7 and 8107127755

May 27, 2009 | 1998 Ford F150 Regular Cab

1 Answer

TRANSMISSION


The two wheel drive tranny won't work because it will be longer. The tranny that came out of the 4 wheel drive is shorter and the transfer case bolts to the rear of the tranny thus it has a shorter output shaft and a different spline to accommodate the transfer case. You need to find the correct tranny unless you want to change the internals from one tranny to the other.

Feb 26, 2009 | 1988 Ford Bronco II

1 Answer

Cant deactivate d 4wheel gear of nissan exterra frm 4H gear to 2H


check vacuum diagram see if any pit hoes are in it also check hoses that connect to it are broken

Dec 28, 2008 | 2001 Nissan Xterra

1 Answer

Tranny problem 88 dodge ramcharger 4wheel drive


sounds like a linkage problem to me. but if you have changed transmission fluid I know newer models require mopar trans fluid. might want to check into

Dec 10, 2008 | 1987 Dodge Ramcharger

1 Answer

88 ford thunderbird turbo coupe automatic


its the ecu on the passenger side i went thru 3 trannys in 4 months and they finally looked for the problem because the tranny was under warenty and they had to keep fixing it for free

Nov 11, 2008 | 1988 Ford Thunderbird

1 Answer

Broco


bad vacume module on top of tranny or on the side of transfer case

Oct 01, 2008 | 1988 Ford Bronco II

1 Answer

Transmission


sound like you need a rebuilt tranny,like a manual tranny it has aclucth,a/t has a clutch but you need to take off all gear from inside like planetary gear etc.

May 22, 2008 | 1988 Ford Ranger

1 Answer

Transmission


Transmission is gone. Get a new vehicle, or get a rebuilt tranny and swap it out.

May 22, 2008 | 1988 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...