Question about 1997 Oldsmobile Silhouette

1 Answer

How to put in a power steering hose - 1997 Oldsmobile Silhouette

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 492 Answers

First loosen the hight pressure hose at the lower end. Drain the fluid into an oil pan. Remove the upper fitting. Take out the hose and replace. Refill with new P.S. fluid and dispose the old at a recycler.

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Powersteering leak


I just corrected the same problem. Put it on a rack and check these areas: all hose connections
Power steering reservoir
Power Steering Rack and Pinnion

Apr 13, 2013 | 1993 Nissan 300ZX

1 Answer

Borrowed vehicle from family, drove it home and was fine. drove approximately 3 miles the next day , stopped to drop off friend and when put back in drive had no power steering and the brakes are all but...


You have what they call a hydro boost system, the power steering pump give power steering assist, and give power brakes, so if your power steering hose looses fluid you get not power steering and no power brakes, So check the power steering hose for leaks if there is no leaks replace the powersteering pump

Nov 12, 2012 | 1994 GMC Safari

1 Answer

1999 VW Passat with Power Steering Hose Leak


better to replace if kinked just disconect form both ends wherever its conected put new pipe on refill power assist resivwar and turn steering lock to lock when started

Aug 17, 2012 | 1999 Volkswagen Passat

2 Answers

Power steering leak on 2003 CHEVY impala V6 3.8


When a power steering pump begins to fail, it's best to replace the pump and both pressure and return hoses to this system.
Recommend you replace this as soon as possible because it could eventually cause damage to your steering rack and pinion.

Jun 23, 2017 | Chevrolet Impala Cars & Trucks

2 Answers

Loud roaring from front right side goes away during a left curve then comes back when you straghten up


This is caused by a bad wheel bearing. to locate the right wheel jack the front wheels up and check for the wheel being loose, or with car jacked up in the air with front wheel off the ground put it in drive and see if you can listen for the noise, you may be right with the right front but just double check, good luck, hope this is helpful.

Feb 05, 2011 | 1993 Honda Accord

2 Answers

The oil in my power steering is black how do I change it


First thing you need to do is remove thwe return line from your power steering reservoir. Thats the thing you put the power steering fluid in. Run that hose to a large container where you can catch a lot of fluid in. Now you want to make sure you have your new power steering fluid on hand before you start and another person would be very helpful also. Have your helper start the car and turn the wheel back and forth while you pour power steering fluid in the reservoir. Do not let your power steering fluid run completely out you can ruin your pump and or steering box. Continue to pour in new steering fluid until the fluid coming out of the hose thats in the bucket is clean fluid. Turn vehicle off reconect the hose to the reservoir and top off. With the lid off reservoir start the vehicle back up and turn wheel all the way back and forth many times(do not turn it to its furthest position where it bumps) continue to make sure the fluid level is always full. By turning the wheel back and forth you are bleeding the lines to get all the air out. Do that a few times, refill and put the cap back on. You just changed your power steering fluid. I f your vehicle is old you may want to get new rubber hoses for your power steering system. hoses degrade over time and eventually they start to flake off into your fluid which can damage parts. Always a good idea to replace hoses especially if they are soft.

Jan 22, 2011 | 1999 Ford Explorer

1 Answer

How to put on power steering pressure hose


Take the hoses to the nearest Hose Man Store. They will assemble and crimp as needed or as you specify.

Oct 22, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Need to replace high pressure power steering hose on 2004 Monte Carlo SS. Need tips to effectively do the job myself. Tools needed, tricks to make the job easier, what not to do...etc. Thank yiou so much...


Power Steering Line/Hose: Service and Repair
Pressure Hose
Power Steering Pressure Pipe/Hose Replacement (3.8L)
Removal Procedure
1. Place a drain pan under the vehicle.
2. Remove the accessory drive belt.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the tire and wheel assembly.
5. The power steering pressure hose is the lower hose at the power steering gear.
Remove the power steering pressure hose from the power steering gear.
6. Remove the power steering pressure hose from the power steering pump.
7. Remove the power steering pressure hose from the clamps on the power steering gear.
8. Remove the power steering pressure hose from the vehicle.
Installation Procedure
1. Install the power steering pressure hose to the vehicle.
2. Install the power steering pressure hose to the clamps on the power steering gear.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the power steering pressure hose to the power steering pump.
^ Tighten the fitting to 27 Nm (20 ft. lbs.).
4. Install the power steering pressure hose to the power steering gear.
^ Tighten the pressure hose fitting to 27 Nm (20 ft. lbs.).
5. Install the tire and wheel assembly.
6. Remove the drain pan from under the vehicle.
7. Lower the vehicle.
8. Install the accessory drive belt.
9. Fill the power steering system with power steering fluid.
10. Bleed the power steering system.
11. Inspect the power steering system for leaks.

00d203e.jpg

Sep 15, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

I'm trying to replace the power steering pump on my acura integra 1994 how can i replace it


drain power steering fluid.disconnect the inlet and out let hoses from power steering pump.remove belt by loosen the adjusting bolts on pump bracket.remove power steering bolts and remove pump.put in new power steering pump torque it 17 ft lbs . connect hoses .put belt back on adjust the belt tension. add fluid check level . bleed the air from system.

Apr 13, 2009 | 1990 Acura Integra Hatchback

1 Answer

Power steering fluid leaks quickly out 1989 Volvo 740 GLE wagon


The most obvious places are the Power steering rack itself - at each end, and the hoses that are attatched to it.
A leak at the pump is easily spotted.

Hoses are cheaper to replace than seals on the rack (which may require a new unit)

Feb 04, 2009 | 1989 Volvo 740

Not finding what you are looking for?
1997 Oldsmobile Silhouette Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...