Question about 2004 Chevrolet Venture Passanger

1 Answer

I have had my driver's side front wheel bearing changed twice and still have issues with the ABS light coming on sporadically and hearing the noise when turning sporadically. I just had the master cylinder changed and brakes have been checked. The ABS light was not on when the work was being done - so they could not diagnose that issue. Ofcourse, as soon as I left - the ABS light came on. Once the car ignition turns off and back on again - it resets it and then it may be a week before it comes back with the problems again.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 74 Answers

Sometimes moisture can get into the connectors and short out the system giving it an error. Mine was in the passenger compartment under the seat. Sprayed it out, cleaned it up and light went out. I just kept up on the brake maintenance, fluid level, pad and rotors more so than average. In all honesty, the brakes received horrible marks in that vehicle's reviews. With the light on I took it to a shop because I have no ABS tools, they could not tell me what was wrong with the system other than the light was on.

Posted on Jun 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Traxtion and ABS lights come on at same time and noise come from front area of car. What does this mean?


Depending on what car you have. It's as though you have an abs ring/sensor fault, the noise you are hearing is the abs pump working this is because the gap between the abs sensor and the abs ring is to close, which make's the abs control module think that the wheel has locked up. causing it to open the valves in the abs hydro unit to try take away the pressure from the side with the fault.

Oct 18, 2016 | Cars & Trucks

1 Answer

Traction control on


Is this noise you're talking about coming from one of the front wheels? If it is and is louder when driving at speeds say 25-45 mph while turning the steering wheel from side to side I would say you're probably dealing with a front wheel bearing issue the noise is the bearing and the reason the lights are on is because the computers for both abs and traction control are receiving incorrect wheel speed from the side that is loose/bad.

Jan 08, 2013 | 2007 Suzuki XL-7

3 Answers

My volvo v70 2002 is showing the warning 'abs/anti-skid service reqd', also the driver side front wheel makes a screeving sound not unlike worn doiwn pads on discs when making a right or left


Felix any noise coming from the front wheel while turning leaves me thinking front constant velocity joint if the car is front wheel drive. With the abs light on I would take down the front driver side wheel and check the brakes for wear along with the front wheel bearing assembly for play or loosness, Check for the sensors to make sure they havent came off and are rubbing your rotors as you make your turn. It can be a number of things. Usually when its the front constant velocity joint it makes a popping noise as if something is binding. As for the front wheel bearing assembly it could make noises usually after the car has been ran down the road and heated up the bearing then it will sing to you. But as you mentioned about the noise only during turning I would lean towards constant velocity joint or sensor hanging and rubbing the rotor, Its only one way to find out. Hope this helps.

Jan 03, 2012 | 2002 Volvo V70

1 Answer

I was wondering on a alero 99 , i replaced the brakes and a caliper and fixed my brake lines but my abs light is on but it sounds like a airplain when u drive their is no shaking or grinding in the front...


YEP BAD WHEEL BEARING WILL MAKE A ROARING LIKE NOISE WHILE IN MOTION.BAD WHEEL COULD PUT DRAG ON WHEEL WHICH CAUSE ABS LIGHT TO COME ON.YOUR WHEEL BEARING HAS THE WHEEL SPEED SENSOR BUILT INTO IT.SO IF WHEEL BEARING BAD THE WHEEL SPEED SENSOR PART OF ABS BRAKE SYSTEM WILL CAUSE ABS LIGHT TO COME ON IF WHEEL BEARING BAD.MAKE SURE FRONT BRAKE PADS INSTALLED CORRECTLY IF NOT. YOU WILL GET TERRIBLE WHEEL NOISE ALSO.

Aug 21, 2011 | 1999 Oldsmobile Alero

1 Answer

My traction control light as well as ABS and service light came one brought it to the mechanic this morning and he scanned it couldn't find anything light came offf and he told me it could be the abs...


Depending on vehicle it is I'd be looking for a bad front wheel bearing. The hubs come with a new sensor anyway. Once the bearing is worn it changes the air gap between sensor and exciter wheel and can give a false reading to the ABS unit. Has your ABS ever activated when coming to a stop sign (even when the roads are dry?). Do you hear a loud humming noise on highway?

Jan 05, 2011 | Chevrolet Cavalier Cars & Trucks

3 Answers

My 2003 mercury mountaineer ABS light is staying on. manually, the brakes work however they shimmy.changed the brake pads,checked the brake fluid and ABS fuse,bud when changing the pads,did now clean the...


I replaced the hub bearing assembly on drivers side twice and the light stayed on and the brakes worked fine. It was the wires (visible just above the tire on the frame) that rubbed against the frame that had shorted out. It was simply repaired and clip-stripped up out of the way. The light has been off every since then.

Dec 30, 2010 | 2003 Mercury Mountaineer

2 Answers

Abs light stays on funny noise in front driver side wheel


You can have a scanner read the abs code, more than likely if you have a growling or humming noise in the Left front then a wheel bearing is bad. the abs in these trucks has the front speed sensors bolted into the wheel bearings, if the bearing gets bad it will sometimes cause the light to come on due to things like broken or "shifting" tone ring, lifted sensor (air gap) due to corrosion, etc... buying an aftermarket bearing comes with a sensor already installed and so normally will fix the problem (if the scanner says that the same sensor is causing the fault of course). check the bearing by jacking up the side of the vehicle you suspect, use a jack stand to support the truck from dropping accidentally, grab the wheel on top and bottom, one hand on each, then rock the wheel to check for play, there should be none, play could indicate a faulty bearing, or some other component. now check for roughness and noise in the bearing by placing one hand on the spring, either coil spring or torsion bar, and spin the wheel by hand, if the bearing is bad you will feel a vibration coming through the spring, you may also hear the "roar" or "hum" of the bearing when it is spinning. This will tell you if the bearing is actually at fault. if you are not comfortable doing this yourself bring it to a qualified mechanic and have them check for you, also a scanner to check the code should be done also to ensure more then one problem does not exist. hope this will help you. cheers

Feb 05, 2010 | 2005 Chevrolet Silverado

1 Answer

Abs and vtm-4 dash lights on. When driving under


Your wheel bearing is the fault.Get it changed ASAP.Good luck hope that was helpfull.

Aug 01, 2009 | 2001 Acura MDX

Not finding what you are looking for?
2004 Chevrolet Venture Passanger Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...