Question about 1994 Chrysler Concorde

1 Answer

When i try to unlock the door the key turns both ways but the lock doesnt pop up

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 4,340 Answers

This sounds like something came disconnected, inside the door. You will need to remove the door panel and investigate. I expect that you will find a rod disconnected. You may want to get a new retainer, as the rod will likely pop out again, if you just put it back...

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 gmc envoy keyless entry is locked and will not unlock with the key or the remote. it does lock - horn and lights illuminate. is it the remote or the car? I can't even unlock to pop the hood.


if your key is not working to unlock door==try turning key over and then try to unlock door. I have had keys made for replacements and they sometimes don't work quite right one way but work just fine the other way.

to unlock hood with out being able to get inside; you need to reach up from under car and pull/yank on cable to unlock hood.

Nov 12, 2014 | 2003 GMC Envoy

1 Answer

Passenger side door on 1998 olds 88 locked and cant get it open even with key


Doubtful. I'd recommend a good locksmith to come pop the lock for you fron the window channel. If you know what to look for, just roll down the window, find the lock linkage, and pop the lock yourself.

Mar 13, 2014 | Oldsmobile Cars & Trucks

1 Answer

Alarm set


this is a factory alarm, the problem is the alarm is active, you will need to use the door locks to turn alarm off, insert key in driversdoor and lock and then unlock door this will turn alarm off, if that doesnt work then use pass/side door, the lock has a built in switch that knows when the door is locked or opened, the driversdoor may have a bad switch so inturn the computer thinks the door was forced opened without key and it is turning alarm on, so again use the key to unlock door try the pass/side if driversdoor doesnt work. good day

Nov 24, 2011 | 1998 Plymouth Voyager

3 Answers

The battery is dead on my 2008 Ford Taurus X, the doors are locked and my keys won't unlock the door. Any help you can give me would be greatly appreciated. I've already tried the key less entry. That is...


I hate the way they have incorporated these new alarm systems so that you cant open the doors when the battery is dead, some cars will lock you inside unable to open door from inside. The electric door locks are what is keeping you from being able to unlock doors. Some people go to Auto Zone and rent the tool that can be slid into the door by way of the window opening, this doesn't always work. the best way to get in is to go under the car with a set of jumper cables and charge the battery from the large battery cable that is connected to the starter.. charge battery enough to access door locks P.s. it wont take much power to use key to unlock door after the battery has a small charge..

Mar 23, 2011 | 2008 Ford Taurus X

1 Answer

The problem I am having is with the door locks, they do lock how they are supposed to it is just that when you go to unlock it the key you turn it to unlock it and it doesnt unlock do you know how i can...


There is a little plastic tab that helps to unlock the rod. If the plastic tab is broken, it won't unlock the door/rod. The best suggestion is to look on craigslist or hit your local junkyard and see if the plastic tabs are intact on one of the vehicle. You can use the models from 1986-1994.

Otherwise, you can lock the door before you close it, hold the handle up. Then, when you need to unlock, you will have to unlock with the key, the back hatch, crawl in and unlock the driver's side lock to pop all the rest.

Dec 25, 2010 | 1988 Nissan Pathfinder

1 Answer

Ok i have a question. I have a 05' Cobalt LS and sometimes its like the door locks get jammed or something. Sometimes the unlock button wont fully unlock it the unlock thing will pop up but door wont open!...


sounds like you need to replaced the latch in the door. or like my 06 cobalt lt the door was bouncing and not closing all the way, or not opening. they cleaned my latch and i havent had a problem since, but that latch in the door could be your problem.

Apr 16, 2009 | 2005 Chevrolet Cobalt

2 Answers

Driver side lock.


the linkage inside the door must have come undone. Yea you need to take the inside door panel off to see it

Apr 10, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Keyless remote


Disconnect the battery from your car (negative cable only) overnight. Make sure you have your radio reset code before doing so.

Then reconnect after 10 hours, and make sure you have remote handy as alarm may go off. Then if that doesnt fix it, go to driver door, then insert master key, pull up on handle first all the way and hold it. Then turn the key slowly all the way so the doors unlock and continue turning the key. This will reset the central locking system as yours may have gotton stuck. then remove key let go of handle, open door and try to lock and unlock doors from switch inside car.

Then try remote. It should work, this is what the dealer will do and charge you about $350...if it doesnt work order a new remote b/c yours may have become damaged by liquid or dropping?

Have a great day,

Thanks,

Mark

Dec 30, 2008 | 1998 BMW Z3 Roadster

1 Answer

00 318ci coupe


depending on how the car is set, the unlock may have to be depressed twice to unlock the passenger door. i'm guessing you have already tried this? if not give it a shot.

if that didn't fix it, then sit in the car and hit the unlock button twice and see if you hear the passenger door unlock/lock mechanism trying to unlock the door. if you can hear it trying to pop the lock, then it may be an issue with the cold. my '99 323 was this way in the cold. if you can't hear it trying to pop the lock, then the module in that door is bad.

also when was the last time BMW replaced the battery in that key?

good luck.

Dec 17, 2008 | 1999 BMW 318 ti

Not finding what you are looking for?
1994 Chrysler Concorde Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...