Question about 2008 Chevrolet Hhr

2 Answers

Wheel bearing noise on the drivers side. I think. when you jack up car the noise is there on drive side only

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 869 Answers

Get ur hhr to a dealer.

Posted on Mar 18, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 749 Answers

When you have it jacked up try grabbing the tire at 12 oclock position and 6 oclock position and shake the tire up and down to feel for excessive movement but if you do only hear it from the driverside you most likely are correct in determining which one is causing your problem.

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have recently replaced rear wheel bearing ( driver's side) and this morning I am staring to hear a humming noise either coming from drivers side or from engine ,,I can only hear noise when driving above...


Could be another wheel bearing. You can jack up each wheel and rotate it to see if there is a difference in other wheels.

I had a noise like that in my Acura. Turned out to be low on transmission oil.
Hope this helps.

Feb 25, 2015 | Mazda CX-9 Cars & Trucks

1 Answer

I have an 04 hyundai elantra. When im driving slow (0-40mph) you can hear a grinding noise coming from the front driver side, but when i speed up on the highway or anything there is no more noise. it


This could be the brake pads dragging or it could be a wheel bearing. You can check one or the other. The wheel bearing is tested by jacking up the car with that wheel off the ground and see if you can rock the wheel side to side or up and down. The way to check the brakes is to take the wheel off and look at the brake pads.

Sep 14, 2014 | 2004 Hyundai Elantra

1 Answer

Clicking noise was occurring from driver side while turning.


Possible drive axle came apart, jack up front end with safety stands, pull wheel off and inspect drive axle and related components; brakes, wheel bearing, etc...

Feb 22, 2014 | Cars & Trucks

1 Answer

Whining noise front drivers side


could be a wheel bearing jack the side with the noise & spin the wheel

Sep 09, 2012 | 2007 Hyundai Sonata Limited Sedan

1 Answer

I have a peugeot 206 got knocking noise from drivers side front when driving


sounds like wheel bearing, jack wheel up, an see if there is any free play, by trying to move wheel side to side

May 16, 2012 | 2004 Peugeot 206

1 Answer

OK, let me be more specific on the front noise on my 2006 Honda Accord, EX, 4cyl. I have 80000 miles and about 3000 miles ago, I started to hear a noise , which I believed was coming from the driver side...


While driving and with radio off, listen to the noise. Find a road that is clear on which you can drive without any traffic. Drive at a constant speed and make light shifts to the left and right, by doing this, the weight of the vehicle will shift to the apposite side of the steering wheel to which you turn.
When you turn to the left, the weight goes to the right (passenger side) wheel, if the noise stops, you may have a bad wheel bearing.
When you turn to the right, the weight goes to the left (driver side), if the noise stops, you may have a bad wheel bearing.
If the noise does NOT go away, then you may have bad CV's.
Another way to check is by lifting and securing in jack stands. Vehicle in neutral and with your hands, rotate wheel with one hand. Other hand place on suspension component. Spring of strut. If you feel slight vibration, you may have a bad wheel bearing.
With vehicle on jack stands, one hand on top of wheel and other on bottom, try to see if you can move the wheel in and out which may be a had CV.

Jul 25, 2017 | 2006 Honda Accord 2.4

2 Answers

My 2001 cavalier makes aconstant humming noise. When I turn to the right it goes away. I am thinking it is the wheel bearing in the front right. Has anybody else noticed something similar?


Correct diagnosis, but make sure it isn't the left bearing. Jack the car up and check both wheels for play. If no play, start and put in drive (while still jacked up off both wheels), and listen to each side for the noise.

Sep 02, 2010 | 2001 Chevrolet Cavalier

1 Answer

Shop can't do an alignment because the driver side wheel moves. Also, now there is a clacking noise when turning the wheel all the way. Guy states it's only the bearing. I think its the CV joint, Can't...


Could be one or the other....if you knkow you hit a bad pothole or something...

One way to check to see which one is bad is by jacking the car, and spin the wheel. If it sounds grinding-like...bad bearings....

Same side jacked, grab the tire and kind of twist side to side...there should be almost no play in it. If so...bad CV joint...if not...bearings are toast.

Jan 18, 2010 | 1997 Volkswagen Golf

1 Answer

I think my front wheel bearings may be bad, what are some of the signs when this happens?


Noise. Drive at walking-pace along a quiet street, & listen at each side-window in turn. One side will always fail before the other, giving a rumbling sound on one side. Are yr wheel-nuts tight, front & rear? Jack up the front of the car. Spin each wheel. There should be no noise or roughness, apart from maybe a slight shh noise from the brake. Hold the road-wheel at top & bottom & try to shake it. Movement could be wheel -bearing or suspension wear. Look at or put your thumb against the various joints while an assistant rocks the wheel. Don't get under a car unless it's rock-solid.

Nov 27, 2009 | 2000 Nissan Maxima

1 Answer

How to check front bearings on 2000 kia sportage


hi there, there are two ways to check your bearings, 1, is to jack up the vehicle so the wheel is free of the ground and to check for any play or roughness in the bearing by spinning the wheel, if the bearing is worn then you will hear a droning noise, 2 is to drive along a quiet road, at a speed where you can hear the noise, gently turn the steering from left to right so the vehile load is being shifted from one side to the other, if you have a wheel bearing fault the noise's pitch will alter,hope this helps

Oct 24, 2008 | 2000 Kia Sportage

Not finding what you are looking for?
Cars & Trucks Logo

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...