Question about 1990 Chrysler New Yorker

1 Answer

1990 Chysler new yorker 3.3 moter. The belt tentioner "bracket" not the pully, snapped off, i havent tore into it yet but i cant see how/where it attaches to? does anybody know? and what does it entail? Thanks, MC

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

Go to the website for autozone or advance. look up your part, there will be a picture of it and you will see where and how it bolts to the engine. you replace the whole thing, base, arm, and pulley. the spring gets old and weak, replacing the pulley only will do you no good.

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the procedure for removing the power steering pump


1982 Chrysler New Yorker Power Steering Belt Removal ...

? 0:35
www.youtube.com/watch?v=vZD17F_ao-o
Jan 18, 2015 - Uploaded by Kerman 559 Sanchez
1982 Chrysler New Yorker Power Steering Belt Removal ...1990 Chrysler New Yorker Fifth Avenue Start Up, Engine, and In Depth Tour ...

1990 chrysler new yorker 3.3 power steering pump change ...

www.fixya.com/cars/t15056742-1990_chrysler_new_yorker_3_3_power
Nov 18, 2012 - SOURCE: 1990 new yorker alternator replacement. You are right aboutremoving the motor mount. You have to support the engine with a jack.
images for 1990 Chrysler New Yorker remove power

Oct 20, 2015 | 1990 Chrysler New Yorker

2 Answers

1993 Chrysler New Yorker 5th Ave. the serpentine belt keeps coming off. 3.8l V6.


Check the tension of the belt. On the longest run it should depress about 3/8" with a 20 lb load applied to it. Or you should be able to twist it 90 deg at the longest run without too much effort.

Feb 14, 2011 | 1993 Chrysler New Yorker

1 Answer

How do i time my Golf 1 correctly? it consumes a lot


its tricky enough if your not sure what your doing but ill run you through it. 1. remove top rocker cover and timing belt cover. 2 make up the position of the pully on the cam shaft at the top and the drive shaft at the bottom, this marks are you fail safe incase you cant time the engine. 3 remove the timing belt and pully tentioner, note if your going this far you are as well to replace the timing belt,tentioner and water pump. 4 On the cam shaft at the top if you force them to turn you will see a small indicator mark on the shaft this mark has to line up with the other indicator mark on the housing between the cam shaft and the cam shaft pully, once they line up your top end is timed, mark up the pully incase it moves. 5 on the drive shaft pully there is also markings that have to line up but you can also feel the position of the pully as you turn it, you will feel the piston been forced up and it is timed at top dead centre on cylinder one, which means the the piston has to be at the top just before the point of returning back down, using your feeling as a guide and the markings lined up you will have timing. also mark up this pully, your new marking should be very very close to the fail safe markings you put on at the start. when you have your marking replace the timing belt with the longest distance between pully contact going on first, try not disturb your timing or your hard work will have been for nothing, make sure the tentioner on the belt is tight but not to tight to the point where you ll stretch the belt or snap it, put everything back as you found it and crank the engine, job done, best of luck. hope this helps( rate me on my answer thanks )

Aug 27, 2010 | 2000 Volkswagen Golf

1 Answer

WHERE IS THE TENSIONER PULLY ON 1990 CHRYSLER NEW YORKER 3.3


The tension pully is located below the alternator, and when the alternator is pushed toward the firewall, then the tentioner is released

Jun 10, 2010 | 1990 Chrysler New Yorker

1 Answer

1990 chysler new yorker wont start


check fuses and relays before suspecting the pump. if fuses and relays are good, access the fuel pump power connector and check volatage

Mar 26, 2010 | 1990 Chrysler New Yorker

1 Answer

Timing belt cover will not come off, due to alt. brack. bolt ...


go back and look again ,these motors are so simple to repair ,thats if its the ford zetec engine if its one of them american models with a gas guzzler 6pot then i havent a clue

Sep 05, 2009 | 1994 Ford Escort

1 Answer

2000 isuzu rodeo removal and installation of serpentine belt


All u need to do is put a wrench on the tention pully and turn it clockwise... this will relive the tention take off the old belt ....put on new one. repeat relive pressure again ...slip it on pully... and relese tention..... done! :)

May 16, 2009 | 2000 Isuzu Rodeo

1 Answer

1990 new yorker alternator replacement


You are right about removing the motor mount. You have to support the engine with a jack. Use a piece of plywood between the jack and the oil pan. Remove the motor mount and you should be able to lift the engine up about 2-3 inches with the jack. Remove the serpentine belt and then you should have enough room to remove the alternator.

Apr 19, 2009 | 1990 Chrysler New Yorker

1 Answer

I need to repaier a serpentine belt for a Chysler New Yorker


if there is a auto zone near you they will print you out a diagram for free and if you have a local library near you you can get pictures and diagrams showing you step by step how to do everything on your car.

Mar 01, 2009 | 1993 Chrysler New Yorker

Not finding what you are looking for?
1990 Chrysler New Yorker Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...