Question about Pontiac Montana SV6
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.
Posted on Jan 03, 2009
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
you may get lucky if you yank the plastic sleeve back and forth that rod goes into to crank down until it comes off spray some PBblaster or wd40 sevral times up into that area and if possible above the foot that is holding tire.Wait about half hour attempt to crank up first and then downward.
Posted on Jun 20, 2009
Use a z clamp,Or us big azz pliers,Or use a hammer handle and put one of the old pad in and put the hammer handle in the and twist it will work.I hope this helps
Posted on Dec 13, 2009
Tips for a great answer:
Jan 16, 2016 | 2006 Pontiac Montana SV6
Mar 02, 2013 | 2006 Pontiac Montana SV6
Feb 01, 2013 | Pontiac Montana SV6 Cars & Trucks
Jan 07, 2013 | 2005 Pontiac Montana SV6
May 18, 2012 | 2006 Pontiac Montana SV6
Oct 08, 2010 | 2005 Pontiac Montana SV6
Sep 17, 2009 | 2005 Pontiac Montana SV6
Feb 12, 2009 | 2006 Pontiac Montana SV6
Feb 17, 2018 | Pontiac Cars & Trucks
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: