Question about 2001 Chevrolet S-10

1 Answer

2001 cherolet S10..security light/feature

We have a 2001 chevy s10 bought it used roughly a little over a year ago
since then we've spent $1000 on the same problem
the security light comes on and the truck won't start
we've had different parts replaced, which seems to help for a short time
and then it starts again...as recently as this morning
we'd like to remove this security feature or by pass it..but we've been told it's installed from the factory and can not be done
anyone have any solutions????

Posted by on

  • rebecca
    rebecca Mar 02, 2014

    turn the key on the truck but do not start it up , and the disconnect the battery post and that will turn off the securiy light off ,once you do that reconnect that battery and then start you truck up ri

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Please someone post the answer, my truck is the same way. It used to just need to sit for about 15 min. and would start. Now it won't start at all.
thanks

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace dash lights 1988 chevy s10 pickup


http://www.justanswer.com/chevy/1edpm-change-dash-light-1991-chevy-s10.html

Jun 06, 2012 | 1988 Chevrolet S-10

1 Answer

How to replace 2001 s10 pickup fuel pump


This is not a full answer, but a tip on an easier way.to get to the pump. Instead of removing the gas tank. Just pull the bed off the truck! I guarantee that it will be easier. I did this on a 2001 S10 and it took less that an hour to remove the bed.
Remove the spare tire, and the tube that the tool to lower the tire goes through. You will need to unplug your tail lights under the back or the bed on both sides. There is also a grounding screw for the tail lights on each side that needs to be removed. Remove the screws that hold the gas tank filler hose to the side of the bed - right by the filler cap. Remove the tailgate (to make the bed lighter). Follow the frame down the length of the bed and you will find the bolts holding the bed on. There should be 6 or 8 bolts. My S10 had 8 bolts and my son's full size Chevy PU had 6 bolts (go figure?). Then just lift the bed off the truck. We did my S10 with 3 people and it had a camper shell and rack on it. My son's full size truck was lifted off with only 2 people. I would suggest 4 people however - one on each corner to make it easier to lift and control.
Replace the pump as described above and then you can start the engine to make sure everything works before setting the bed back on. NOTE: The fuel pump grounds back with the tail light ground. If the engine doesn't start right away, try grounding the wire back by the tail lights. It works like a charm. This is an especially nice way to do it if the gas tank is full! I spent 18 years as a professional mechanic and this is one of the slickest, least known tricks I have come across. I wish I'd known about it when I was wrenching for a living! Cheers!
cb6f5baf-9d72-4319-b871-6eae67d521ce.jpg

Apr 20, 2010 | 2001 Chevrolet S-10

3 Answers

Car will not start security blinking can not get it to trun off is there a way to bypass or trun it off


turn your key to the on position and leave it until the security light stops blinking, im pretty sure it's about 10 minutes. Once it has stopped blinking, turn the key back to the off position and then try and start. but keep in mind that this will only work that time. Chances are this will come back. If you don't mind having your security light on all the time, then try this. It's a cheap fix compared to the 500 a dealership will charge you.
http://www.car-forums.com/s10/t25650.html

Mar 06, 2010 | 2001 Oldsmobile Alero

2 Answers

Need a wiring diagram for a chevy s10. brake


your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

Nov 24, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

2000 Chevy s10 2.2L very rough idle at low rpm


run a fuel pressure test, if that checks out fine it may be a faulty coil pack or ignition control module

Jul 28, 2009 | 2000 Chevrolet S-10

2 Answers

Chevy S10 wont start


when u turn on the ignition does the light for the dash board turn off and when u release the ignition key back light for dash board come back. If this happens a battery poles are dirty or loose try cleaning and tighten good

Jul 24, 2009 | 2001 Chevrolet S-10

1 Answer

Chevy S10 Rearview Mirror glue sticks, but temporarily


At this point, I'd take it to a glass shop that does windshields and let them try the commercial adhesive.

Jun 16, 2009 | 2004 Chevrolet S-10

1 Answer

Chevrolet S10 2001


it can be done....Start the truck and look at key cylinder under those covers of the seering column. There is a yellow wire that runs to it....CUT IT...Lol...really after its running cut that yellow wire..Just member to look at the key cylinder. you will see very small yellow wire and black and maybe a white....Cut the yellow on and it kills the factory antitheft. however the light wil be on the dash that says anti theft. If you are so inclined just take the dash panel out and remove he bulb. I did...

Aug 01, 2008 | 2001 Chevrolet S-10

Not finding what you are looking for?
2001 Chevrolet S-10 Logo

510 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...