Question about 2000 Chrysler Town & Country

1 Answer

Ignitin switch will not move with key How do you you replace.... remove the old one

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 3,247 Answers

Before you do anything with the ignition key check the gear shift lever is not stuck in gear or there is no problem with the transmission. I am assuming you have an automatic transmission.

The gear position P sensor might be faulty. There is an interlock between gear shift and the ignition switch.

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the ignitin relay on an 85 ford f-250


Open the hood. Attached to the passenger side fender

Oct 18, 2014 | Cars & Trucks

1 Answer

I have a 1989 Isuzu trooper. The motor will turn over but not start sometimes even after you remove the key it continues to turn over


*Turn over. No start.>> Check spark and fuel.
*After remove the key but car still crank. (turn over)
The ignitin switch is stuck>>Check and replace. or ignition wire could be burn that keep touching metal frame.

Good luck

Mai

Mar 26, 2013 | 1989 Isuzu Trooper

1 Answer

Key stuck in the ignitin of a 2005 grand prix


Check to be sure your shift lever is all the way in the Park position. Move it up and down several times to be sure. If that doesn't work shift into neutral then move steering wheel side-to-side to be sure it isn't locked under tension. Place shifter back into Park position. If that doesn't work check all your fuses. There is a small safety switch located under the shifter boot. It is there to prevent the car from starting when not in Park. A blown fuse can cause it to stop working. If all else fails, remove boot and manually press this switch. If key comes out then that's your problem. Good luck.

Mar 10, 2013 | Cars & Trucks

1 Answer

My key is stuck in the ignitin and wat come out


The ignition key cannot be removed from the ignition switch, unless the shift lever is in Park. When the shift lever is in any position other than Park, a solenoid is activated, making it impossible for the key to be removed, until the shift lever is moved to Park.

Feb 13, 2010 | GMC Envoy Cars & Trucks

1 Answer

Is it the kill switch?


The kill switch would not stop the key from tirning you may nee to try your backup keys or replace the ignitin cylinder..........

Jun 27, 2009 | 1995 Chevrolet Monte Carlo

1 Answer

2000 GMC Jimmy won't start


Hi: Have run into same type of problem, turned out to be a dead or very battery. Has nothing to do with the ignitin switch. With a low battery have also had trouble getting the key out of a 95 Jimmy. Boost unit to get running then discommect battery, if unit stall right away replace alternator, if stays running replace battery. If you get the unit runnimg and try to drive it as is you should find lacks power and wants to stall.

Jan 09, 2009 | 2000 GMC Jimmy

2 Answers

The ignition switch needs to be replaced, but i cannot get the key to turn to put the new switch in. Any suggestions on getting the key to turn


use a cordless drill to drill the lock cylinder out.a 3/8 bit will provide enough clearance to remove the lock assembly.

Aug 23, 2008 | 2002 Pontiac Sunfire

Not finding what you are looking for?
2000 Chrysler Town & Country Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...