Question about 1990 Toyota Land Cruiser

3 Answers

My LJ78 landcruiser prado 2LTE EFI , automatic transmission, has a very poor acceleration, whether it be in 1st, 2nd gear etc. I suspect something to do with the autonmatic clutch, perhaps the gear pump? Engine revolution, rpm is ok, no smoke, green LED turbo indicator lights up.

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

When was last trans fluid & filter change? Should be done every 30k or 3 years. I'd start there.

Posted on Mar 14, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

HELLO,

PROBLEM: I'M HAVING TOYOTA LAND CRUISER PRADO LJ78 2LTE AUTO TRANSMISSION THAT HAVING A PROBLEM OF DISTURBED DEISEL AVERAGE, NEW INJECTORS NEW PUMP AND GEAR BOX IS AS FINE AS NEW BUT ALSO HAVING VERY POOR DEISEL AVERAGE 5.5 KM IN 1LTR THAT SHOULD BE 9.5 KM IN 1 LTR AS ORIGNAL NEW PRADO...

CONTACT ME IF U HAVE ANY SOLUTION AT MY EMAIL: almec01@hotmail.com

Posted on Nov 10, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello sir,
Can you tell me where I can found the engine and car's manuel?
Thanks

Posted on Mar 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge Ram 3500 skips from 1st to 3rd gear, had rebuild after still the same issue. Any advice?


Governor pressure controls the 1st and 2nd shifts. After that is the 3 and 4 solenoids. you would need to look at the pressure when driving(takes a scanner). pressure is 20 to 30 PSI from 1st to 2nd, depends on acceleration. After that the pressure will jump to 100+ psi. Did you replace the governor solenoid and sensor? They are on the passenger side of the transmission and sit in a block that detaches from the valve body.

Sep 22, 2016 | 2005 Dodge Ram 3500

1 Answer

2nd gear will not enter whether from 1st to 2nd or 3rd to 2nd and truck will vibrate (when trying to shift from 1st to 2nd) on my 1987 Nissan pickup d21 Z24 manual transmission.


I suspect a failed bearing or synchro assembly in the transmission
check that by removing the drain plug and checking the magnet for metal bits
if there are particles then it is a box out for rebuild

Oct 08, 2015 | 1987 Nissan Pickup

1 Answer

Engine could not start


did you bleed the system if air is there it wont start

Apr 06, 2014 | 1990 Toyota Land Cruiser

1 Answer

Toyota 120 prado 2007 automatic. sounds like transmission whine at low speeds only.


why not, do the 50k mile tranny full flush with new filter, now.
maybe you can save it from doom.
check levels
check for not pink ATF, if brown , or black , change it now.
if full of metal dust, big cry.

Jan 18, 2014 | 2005 Toyota LandCruiser Prado

2 Answers

I have no owner's manual for my 2000 Landcruiser/What buttons do


overdrive is used when you are trying to accelerate going up a steep hill. have you ever noticed when you are going up a hill that you can not maintain speed? hit this button and you wount need to floor it

Jan 13, 2009 | 2000 Toyota Land Cruiser

4 Answers

1997 Toyota land cruiser prado Rz compass bearing, temperature setting, etc.


I've been resetting pajero's compasses but try to get to an area where you can do 360 degrees turns (empty car parks, ) press the reset button and make 2 complete 360 turns slowly and normally this should set the compass bearing.
Let us know how you get on. Cheers.

Sep 14, 2008 | 1996 Toyota Land Cruiser

1 Answer

Hard shift and blinking overdrive


The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

Jul 16, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
1990 Toyota Land Cruiser Logo

1,665 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...