Question about 1999 Cadillac DeVille

1 Answer

I have a 1999 cadillac deville with the ABS and traction control lights on. I had the codes checked and its coming up c1233 which is right wheel speed circuit open or shorted. I have had the wheel bearing replaced, and the lights came on less for 2 days, but now come on all the time. The wheel bearing has been replaced twice now, so i guess it has to be the wire that goes from where the sensor plugs into, to the EBTM. Does this need replaced, and where do i get one of these connectors?

Posted by on

  • flowmaster40 Mar 23, 2011

    Forgot to mention, when driving, I also get the codes C1222-Right Front Wheel Speed Sensor Input Signal is 0, and C1226-Right Front Excessive Wheel Speed Variation. And the biggest mystery of all is that only when it rains or snows, the lights go out and the car and system works fine, why is this??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cadillac Master
  • 11,498 Answers

Diagnostic Aids
• It is very important that a thorough inspection of the wiring and connectors be performed. Failure to carefully and fully inspect wiring and connectors may result in misdiagnosis, causing part replacement with reappearance of the malfunction.
• An intermittent malfunction can be caused by poor connections, broken insulation, or a wire that is broken inside the insulation.
• If an intermittent malfunction exists, refer to Intermittents and Poor Connections Diagnosis in Wiring Systems.

Do you know how to do automotive electrical wiring trouble shooting ? Use a DVOM - digital volt ohm meter ? How to use a wiring diagram to pin point testing spots in a electrical circuit ? Testing before replacing parts is key !

Posted on May 28, 2017

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

c1apton15
  • 3400 Answers

SOURCE: I have a 1999 cadillac

It's not the wheel bearing, it's the sensor or the wiring. You can get wiring and connectors from ANY GM dealer.

Posted on Mar 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my ABS light stays on and sometimes i get a vibration in the brake petal causing my 2002 Cadillac escalade not wanting to stop?


Sounds like a fault with the Antilock Braking System. The vibration in the pedal is the ABS working. With your foot on the brake pedal, it releases and re-applies the brakes to stop a skid from the wheels locking up. You need professional service for brakes.

Seems to be a known issue on all Cadillac and requires the ABS module to be replaced.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille Cadillac DeVille ABS Light Due to ABS Control Module Failure. This is a verified problem based on 126 reports. Learn more about this problem, when it occurs ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville STS Traction control and ABS lights stay on dash. This is due to ecbtm Module gone bad. replace Module and this should fix the problem. You can go by the VIN and ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille DTS ABS Light Due to Control Module Failure on Cadillac DeVille DTS. The anti-lock ... ABS and Traction control light stays on. ... abs light to abs control stay on.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville SLS ABS Light Due to Control Module Failure on Cadillac Seville SLS. The anti-lock brake ... SLS135,000Jumsee. Abs and traction lights stay on when started.

Jan 12, 2016 | Cadillac Cars & Trucks

1 Answer

What does it mean when my service stability,abs and traction control light come on in my 04 Cadillac DTS


Could be a broken wire. Speed sensor, wheel bearing, and all that stuff they put on it. Have the codes read. This will point you in the right direction.

Feb 11, 2015 | 2004 Cadillac DeVille DTS

1 Answer

Abs traction control


bad wheel speed sensor

Mar 03, 2014 | 2001 Cadillac DeVille

1 Answer

I have a 2001 Cadillac Deville with the ABS and Traction Control light stay on. What is the problem. Could I reset the ABS and Traction Control light? If so how could I reset ? Larry


Hello: There are many things that will cause the lights to come on. You can check the brake fluid if it is low that will cause the light to come on. you can clear the code with a up scale scanner but if the problem is not corrected the light will come back on.

Apr 22, 2011 | 2001 Cadillac DeVille

1 Answer

I have a 1999 Cadillac Deville , the situation the car is raised high in the back rear suspension, with two lights on . The ABS light and the Stablize Traction lights on. What is the problem ?


HAVE VECHICLE CODE SCAN,SOUND LIKE YOU HAVE PROBLEMS WITH ABS BRAKES AND THE TRACTION CONTROL,SEEM LIKE YOUR AIR SHOCKS ELC HEIGHT SENSOR COULD BE BAD CAUSING AIR SHOCKS TO OVER EXTEND CAUSING CAR TO RAISE HIGH ON BACK END.WHICH COULD BE THE CAUSE OF ABS AND TRACTION LIGHT TO COME ON, TO FIX THIS PROBLEM HAVE CAR CODE SCAN AND YOU CAN FIND OUT WHAT CAUSING THE ABS AND TRAC LIGHT TO TURN ON.

Apr 03, 2011 | Cadillac DeVille Cars & Trucks

3 Answers

Traction control and anti-locks(ABS) lights come on.


Traction control and anti-locks(ABS) lights come on there is sensors that are pluged in behind the rotors check and see if they are disconected or loose sometimes when you change your brake pads they might come loose and not making contact.

Jul 06, 2010 | 1998 Cadillac DeVille

2 Answers

Traction conrol abs


Try seeing if any of the codes are set off. On your climate control section with the ignition on hold the off and warmer button and the display will cycle through the codes. Could be a wheel sensor I had a c1225 LF sensor. Could also be a problem with the Wheel speed sensor harness see TSB# 0005-25-003. When I called my dealer about this TSB they didn't know anything about it. If you shut off the car and disengage the traction control, in the glove box, do the codes go away?

Good luck

Jun 29, 2009 | 1999 Cadillac DeVille

1 Answer

ABS LIGHT AND TRACTION CONTROL LIGHT ON DASH


make sure u didnt break a wire, there are sensors on the brakes, make sure theyre plugged in

Jun 10, 2009 | 1999 Cadillac DeVille

1 Answer

Abs traction control lights


try taking it to a auto parts store were they can clear all the codes for free the trouble codes that is then the light should stay off

Jan 03, 2009 | 1997 Cadillac DeVille

Not finding what you are looking for?
1999 Cadillac DeVille Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...