Question about 2004 Hyundai Santa Fe

1 Answer

My Car soounds like its going to stall, its reving high and low, worse when air con is on, i recently took my car to hyundai dealer to have it looked at for this problem, they called me at work and said it may be the speed sensor however probably just the plugs and leads, so they replaced all plugs and leads for the cost of $639.50, i collected my car and the problem was still there, i discussed with them they advised a new sensor will be required, at $900.00 but they could get me a second hand one, so I agreed and explained I just want the noise to stop and the high random reving, they assured me all will be sorted, at that time i pointed out another noise that had developed which was the front brakes and they advised they would take a look abnd repair if nesacarry, upon collection of my car after this work was done and $689.00 later i started my car and it reved sooo high and in reverse was making the horror stalling noise again, i ran into office told the guy who just taken my money to which he replied "oh that noise is your exhaust" OMG is this a nightmare or what, i am a single working mother with no family here, what the heck is wrong with my car? and who can i trust to actually repair it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

Ask to speak to service manager and tell him about your issues. If he can't resolve then contact Hyundai customer relations and ask to meet with an area rep at the dealership.

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am having serious problems with the idle modual it reves at the norm then all of a sudden the reves just increase up to roughly 2.300 and then come down to near stalling


First Check All Air hoses. Make sure no vacuum leak are present.
make sure your ignition coil are good. This will make engine idle roughly. For the rpm to high or to low maybe your air idler is no good. If you're car turn off it might be overheated. Check coolant level. Make your not mixing water with oil. Check the oil dipstick to verify. If like a milky color then it's mixing water with oil. This will car to stall and run roughly

May 08, 2014 | 1995 Mazda 626

2 Answers

Gas pedal reving up and not relaxing.


I have had a problem on a 2008 Santa Fe with the gas pedal going to idle while driving. I shut the car off and turned it back on and it behaved normally so I drove it to the dealer. It had triggered the check engine light and the Hyundai mechanics were able to read a code that told them that the problem was in the sensor on the pedal. They replaced it under warranty. No problem since.

Jan 29, 2010 | 2007 Hyundai Santa Fe Limited

2 Answers

01 hyundai Elentra idling issues


i had the same thing with my 01 elantra. i took it in and they had to replace the gasket on the air intake manifold. cost about CD$700

Oct 17, 2009 | 2001 Hyundai Elantra

1 Answer

Hyundai Elantra 2001 auto. Stalling, cutting out, hicupping on occasions. Worse (or more likely to happen)with Air con on, or car/ambient temperature is hot. Any solution, Matthew103


This may not be the fix. But my 2001 has 150,000 and I have had several times the same issue. Plugs and plug wires fixed each time. Do not buy cheap plug wires. Your better off with paying a little more for a good set.

Apr 16, 2009 | 2001 Hyundai Elantra

1 Answer

Engine stalls


I would start by checking your IAC (idle air control) valve. It is usually located within or near the throttle body. The inpection procedure varies across vehicle makes and years, I would consult a Chilton's (or similar) repair manual for the exact procedure. If such a book is unavailable, you can remove the IAC and check for excess buildup of carbon or other debris. Let me know what you find!

Mar 23, 2009 | 2005 Hyundai Sonata

1 Answer

Cam sensor misfire


If the mechanic pulled a code for a cam sensor, it is very possible that as it gets hot, the cam sensor starts to produce a degraded signal and the engine progressively runs worse. I'd replace the cam sensor without hesitation. The trip to the dealership will cost more than taking an educated shot at the cam sensor.

Mar 17, 2009 | Hyundai Motor 2003 Sonata

2 Answers

Car overheating


fan relay or fan motors also try the fan fuses

Oct 06, 2008 | 1999 Chrysler Concorde

4 Answers

Stalling


I have a 2000 Sonata V6 with the same issue (low speed intermittent stalling). Finally found a Hyundai dealer that knew about the issue and replaced the CRANK SENSOR. This has dramatically reduced the stalling but it still occurs very rarely. I think the engine idle speed of my car is abnormally low and this may be a secondary issue not completely related.

Jun 07, 2008 | 2000 Hyundai Sonata

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...