Question about 1997 Dodge Intrepid

1 Answer

Water pump Do you know where I can get a free water pump diagram or picture for a 1997 dodge intrepid 3.5 engine.. Also do you know if I have to take out all the belts before installing the new water pump? I just need a little direction.. Thank you it's greatly appreciated..

Posted by on

  • oldiron4 Nov 11, 2008

    Were is the water pump located on a 1997 Dodge intrepid 3.5 liter engine?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 80 Answers

You can buy some diagrams at alldata.com . and yes all belts must go. goodluck

Posted on Aug 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace water pump 99 2.7


Hope this helps you....

Instructions
  1. Prepare the Dodge Intrepid
    • 1 Lay out a drop cloth underneath the Dodge Intrepid to protect the floor from coolant spills. Designate an area to lay out each part alongside its bolts and connecting hoses and wires. Use a drop cloth here as well, some of the parts will have traces of grease and coolant.
    • 2 Disconnect the negative battery cable, using a screwdriver to unscrew the clamp that secures the cable to the negative (-) post. Pull the cable away from the battery post.
    • 3 Use a jack to elevate the Dodge Intrepid and jack stands to shore up the jack. Release the pressure in the radiator by removing the cap. Take out the drain plug located underneath the radiator. Catch the coolant in a resealable container
    • 4 Use a grease pencil to mark on the timing belt its position in each pulley before removal. This will save time when reinstalling. If needed, replace the timing belt and skip marking the old one.
    Remove the Damaged Pump
    • 5 Locate the water pump on the Dodge Intrepid. It's mounted on the front of the engine block and connected to the radiator and various other parts through a series of hoses. It's rotated by the timing belt. Study these parts, as you'll have to remove them.
    • 6 Disconnect or remove the parts in front of the water pump, using an adjustable wrench. In the most common Dodge Intrepid engine--the 2.7L--you'll find, in order: the upper radiator crossmember, fan module, accessory drive belts, crankshaft damper, timing cover, timing chain and guide wires.
    • 7 Unbolt the water pump from the engine block, using an adjustable wrench. You may have to use a chisel to gently break the seal between the mount and the pump. Discard both the pump and the bolts.
    • 8 Clean off the mounting area with a shop rag.
    Install the New Pump
    • 9 Inspect the new water pump to ensure it's identical to the old pump and free of any metal splinters or debris.
    • 10 Arrange the new water pump on the mount. You won't need sealant for the o-ring on a Dodge Intrepid. Hold the water pump and o-ring in place as you secure it with the new bolts. Tighten them with a torque wrench to 105 inch pounds torque in any order.
    • 11 Install the timing belt and wires, using the grease pencil marks to guide you in installation. Install the rest of the parts in the order removed. The camshaft must be reconnected with a torque wrench at 125 foot pounds torque.
    • 12 Replace the radiator's drain plug and refill the radiator with the amount and type of coolant specified in your owner's manual. Release the jack and jack stands.
    • 13 Attach the negative battery cable to the post and tighten the screw on the clamp. Crank the Dodge Intrepid's engine and check for leaks. Then, close the hood.

Read more: How to Install a Water Pump in a Dodge Intrepid ' eHow.com http://www.ehow.com/how_4508707_install-water-pump-dodge-intrepid.html#ixzz29Q1ZC1uZ

Oct 15, 2012 | 1999 Dodge Intrepid

1 Answer

I'm replacing timing belt and I need to find out how the timing marks on valve pulleys line up with crank. A diagram or picture would be helpful, This is a 3.5 Engine 97 Dodge Intrepid.


Here is a few diagrams of the timing marks. Be sure that you check the marks after the tensioner has been installed as well because installing the tensioner tends to slightly re-adjust the positions of the cams as it takes up slack on one side.

Be carful when turning the engine (by hand) because these engines are an interferance engine and the valves can contact the pistons. After everything is installed and tight, rotate the engine by hand twice and then recheck that the marks are good to go.

If you haven't replaced the water pump, I highly recommend you do it now.


hotrodshop_1.gifhotrodshop_2.gif

Apr 24, 2011 | 1997 Dodge Intrepid

3 Answers

I have a friend thats going to replace my water pump in my '97 intrepid 3.5L engine. we need to know what web site to go to with a how to video. He's not sure where the water pump is. He's pretty good with...


GO TO AUTO ZONE OR ADVANCE AUTO PARTS STORE OR ANY AUTO PARTS STORE IN YOUR NEIGHBORHOOD.BUY HAYNES REPAIR MANUAL FOR 1997 DODGE INTREPED.IT WILL SHOW YOU HOW TO REMOVE AND REPLACE THE WATER PUMP.THE HAYNES REPAIR MANUAL ARE GOOD MANUAL FOR HOME MECHANICS OR DO IT YOUR SELFERS.MANUAL GOOD INVESTMENT.

Apr 18, 2011 | 1997 Dodge Intrepid

1 Answer

I have a 1997 Dodge Intrepid with a 1996 motor in it. I know one of the water pumps are bad but I don't know which one.


the water pump in chrysler vehicles are run by the timing belt so if you decide to do job yourself make sure them timing marks are aligned up correctly cause if not vehicle wont start

Feb 09, 2011 | 1996 Dodge Intrepid

1 Answer

HOW TO CHANGE WATERPUMP 1999 INTREPID 2.7


    Prepare the Dodge Intrepid
  1. Step 1 Lay out a drop cloth underneath the Dodge2_bing.gif Intrepid to protect the floor from coolant spills. Designate an area to lay out each part alongside its bolts and connecting hoses and wires. Use a drop cloth here as well, some of the parts will have traces of grease and coolant.
  2. Step 2 Disconnect the negative battery cable, using a screwdriver to unscrew the clamp that secures the cable to the negative (-) post. Pull the cable away from the battery post.
  3. Step 3 Use a jack to elevate the Dodge Intrepid and jack stands to shore up the jack. Release the pressure in the radiator by removing the cap. Take out the drain plug located underneath the radiator. Catch the coolant in a resealable container
  4. Step 4 Use a grease pencil to mark on the timing belt2_bing.gif its position in each pulley before removal. This will save time when reinstalling. If needed, replace the timing belt and skip marking the old one.
    Remove the Damaged Pump
  5. Step 1 Locate the water pump on the Dodge Intrepid. It's mounted on the front of the engine block and connected to the radiator and various other parts through a series of hoses. It's rotated by the timing belt. Study these parts, as you'll have to remove them.
  6. Step 2 Disconnect or remove the parts in front of the water pump, using an adjustable wrench. In the most common Dodge Intrepid engine--the 2.7L--you'll find, in order: the upper radiator crossmember, fan module, accessory drive belts, crankshaft damper, timing cover, timing chain and guide wires.
  7. Step 3 Unbolt the water pump from the engine block, using an adjustable wrench. You may have to use a chisel to gently break the seal between the mount and the pump. Discard both the pump and the bolts.
  8. Step 4 Clean off the mounting area with a shop rag.
    Install the New Pump
  9. Step 1 Inspect the new water pump to ensure it's identical to the old pump and free of any metal splinters or debris.
  10. Step 2 Arrange the new water pump on the mount. You won't need sealant for the o-ring on a Dodge Intrepid. Hold the water pump and o-ring in place as you secure it with the new bolts. Tighten them with a torque wrench to 105 inch pounds torque in any order.
  11. Step 3 Install the timing belt and wires, using the grease pencil marks to guide you in installation. Install the rest of the parts in the order removed. The camshaft must be reconnected with a torque wrench at 125 foot pounds torque.
  12. Step 4 Replace the radiator's drain plug and refill the radiator with the amount and type of coolant specified in your owner's manual. Release the jack and jack stands.
  13. Step 5 Attach the negative battery cable to the post and tighten the screw on the clamp. Crank the Dodge Intrepid's engine and check for leaks. Then, close the hood.

Apr 04, 2010 | 1999 Dodge Intrepid

3 Answers

1997 Dodge Intrepid 3.5L How to replace water pump and timing belt.


This a dificult and time consuming project. Suggest you purchase you a repair manual which gives you diagrams and detailed instructions for this type of repair. Difficult to explain procudure in writing.

Sep 10, 2009 | 1997 Dodge Intrepid

1 Answer

How to you install a water pumpon a 3.5 97 dodge


Remove the hood bracket bar, 4bolts, then the fan shroud assembly, then the belts, belt adjuster, and timing covers, line up the cam gears, crank gear to the marks , cam has 1 dot, they line up to timing housing 2 dots, (single dot to middle of the 2 dots), crank has 1 dot to mark on the oil pump housing to your right of crank gear, thats TDC. now remove the timing belt tensioner, 2 bolts, and remove the belt, if the pump has leaked, replace the belt, and tensioner if it is NOT metal Pulley, the fibre one will break down from the antifreeze. its a good idea to replace the water pump housing orings behind it, ac bracket has to come off, as the right cam on engine, this not a retiming iussue with the gear. GOOD LUCK. RDJRP

Aug 17, 2009 | 1997 Dodge Intrepid

1 Answer

3 05 bolt patter on 96 intrepid for water pump


Really depends on the engine you have.

If you have a 3.3 L engine then the water pump is a 5 bolt pattern

If you have a 3.5 L engine then the water pump is a 3 bolt pattern.

Apr 23, 2009 | 2003 Dodge Intrepid

1 Answer

Need Diagram of water pump on a 1998 Dodge Intrepid 2.7,


the water pump is timing chain driven and to replace it requires serious disassembly of the engine. it is a 13 + hour job and is not for the casual mechanic

Apr 13, 2009 | 1998 Dodge Intrepid

2 Answers

I have a dodge Intrepid 1993 that has been siting for two years.When i started it up and let it run for a while it started leeking water.and i can't tell where its coming from. Is there a diagram so that i...


the water pump is behing a metal plate that you you would have to take off in order to look at it. if you have the 3.5 motor and are losing water then thats where it wil most likely be coming from,

Feb 26, 2009 | 1997 Dodge Intrepid

Not finding what you are looking for?
1997 Dodge Intrepid Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...