Question about Nissan Sentra

1 Answer

I have a 2002/04 Nissan almera chassis # JN1CFAN16Z0007488 Engine # QG16218511that i purchased with 28000 kms.From day one, every time you drive over a hump the car would stall (not cut off, but stutter) once you take your foot off the gas and give the car two secs it would return to normal.It happens on hills as well. Of lately it started happen on flat surfaces. Now this problem occurs at any time early morning during the day at night, there is no special period for this, Hot or cold engine. Please help me with this. i have changed the transmission twice, sensors, i spent a lot of money on trial and error, please help with this problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

Stop by any good parts store (Autozone, Advance, etc..) and have an OBII scan done (fault scan) they do this free. Have them give you the codes and explain what each one means.
Your computer tracks all these faults that you described and keeps record of them. The multiple issues will top the list. There you will KNOW exactly what ids to be replaced vs throwing parts at it.

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Nissan Almera keeps cutting out completely whilst driving?


run the fault codes and look for cam/crank position sensors.
faulty or loose connections may cause this fault. If you have more than 1 key in the ignition then it has been known that the mass of swinging keys will switch off the ignition
(current recall on all GMC ignition switches for just this reason)

Feb 13, 2015 | 2005 Nissan Almera 1.6

1 Answer

Nissan gearbox


You have a failed transmission.

Mar 12, 2014 | Cars & Trucks

1 Answer

Resetting after installing a radiator on nissan almera


Not sure on the Almera, but some vehicles need the light to be re-set with a scanner, it has stored the radiator fault in it's memory, trip to a garage I'm afraid.

Jan 21, 2014 | Cars & Trucks

1 Answer

How to replace a nissan almera timing chain


Hi all it is with out doubt a major blunder by Nissan to fit a Renault timing chain mechanism to the almera and other Nissan engines. I have dealt with many a customer with an engine light on hoping that a crankshaft sensor would sort the issue out, Nissan will charge in excess of 750 euro to replace the timing kit and having it replaced you might hope to get 120k from the car well I have come across engines only covering 30k buyer chain failure, beware if you are doing a chain replacement your self use (oe) parts often spurious parts don't have the paint marks on the chain to aid setting the timing ,

Oct 17, 2012 | Cars & Trucks

1 Answer

Almera


What did you use to clean the MAF?
You may have damaged the sensor.
I would suggest a used MAF assembly be installed and use only approved cleaners next time and be gentle when cleaning electronics.

May 17, 2017 | 2005 Nissan Almera 1.6

1 Answer

I have a nissan almera 2001 1500 what model


hi i am not 100% sure but i think it is the P11 144 gearbox its used with the almera qg15de engine. i think it is also used in a primera and almera tino of the same years.

Jan 24, 2010 | 2004 Nissan Titan

1 Answer

Engine warning light on Nissan Almera 03


its very simple. You can see a black hose from the engine which connects the metal pipe. just remove it and you can see three gold color pin from the metal pipe. scratch that pins using a salt paper and fix it. Now check whether you get started or not. Thanks.

Jul 03, 2009 | 2003 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...