Question about 1996 Chevrolet K1500

1 Answer

Before i took my 96 z71 4x4 truck 350 ii took it to emissions and it failed the codes p1345 p0441 i found a spark plug wire was tore and a couple of vacuum hoses not connected so i replaced the wires, distributor cap and rotor now its missing, before i did all that it was running perfectly and strong just sometimes it would take a few cranks to start up somtimes right away should i replace the cam or crank sensor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,271 Answers

Make sure you didn't connect a plug wire to a incorrect spark plug.

Posted on Jul 21, 2017

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
ultrat
  • 500 Answers

SOURCE: i failed the emission test

check your spark plug placement on cap. cranking more than normal as in my case I changed fuel filter but in the end I had to change my fuel pump. Check pressure..if possible,,

Posted on Mar 13, 2011

  • 610 Answers

SOURCE: I have a 1998 Z71

First thing i would do, is listen to all of my injectors with a stethoscope. If any sound different, then start there, however you hould have checked compression when your plugs were out. Pull them and check compression.

Posted on Mar 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have code p0441 i topped off the tank once what will fix it


code p0441 refers to evaporative emission (EVAP) system--incorrect flow detected====causes -hose connections ---intake leak---EVAP canister purge valve. Check for vacuum leaks including vacuum controls for the vents or replace the purge valve.

Jul 09, 2014 | 2008 Kia Optima

1 Answer

P0441


Trouble Code: P0441

Small hoses or cuts present in the EVAP vapor hoses/linesEVAP canister purge solenoid is damaged or is stuck openPCM has failed

Feb 13, 2013 | 2003 Kia Spectra

2 Answers

I failed the emission test i changed my distributor cap and rotor now my engine is missing, as before it ran good and idle perfect and was strong accelerating the only thing was i had to crank it onr...


check your spark plug placement on cap. cranking more than normal as in my case I changed fuel filter but in the end I had to change my fuel pump. Check pressure..if possible,,

Mar 13, 2011 | 1996 Chevrolet K1500

1 Answer

My 2005 neon failed emissions. It gave me a codes 0441. What excatly does that define?


Trouble Code: P0441 (2.0L L4 VIN C Auto)
EVAP Purge Flow Monitor Fault Print this code dataprint_icon_codes.gif Number of Trips to Set Code: 2
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
Engine at idle speed in closed loop for 200 seconds, BARO Sensor signal less than 8,000 feet, ECT Sensor more than 160ºF, no Low Fuel, MAP Sensor signal less than 23.7" Hg, and the PCM did not detect any purge flow through the EVAP system during this test.

Possible Causes:
  • EVAP purge solenoid vacuum line loose, leaking or restricted
  • EVAP purge solenoid stuck leaking, stuck open or stuck closed
  • EVAP purge vacuum line to canister leaking or disconnected
  • EVAP canister leaking, damaged or has failed

2005 Dodge Neon - All Configurations - P0441

Nov 01, 2009 | 2005 Dodge Neon

2 Answers

P0441 EVAP Control System Incorrect Purge Flow


Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Evaporative Emission (EVAP) Canister Purge Regulator Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Purge Solenoid Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Sealing faulty.
Pipes between Tank Breathing and Throttle Body leaky/blocked.
Hose connection(s).
Intake leak.
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve.
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.
VSV connector near air filter box disconnected.

Jun 15, 2009 | 1996 Chevrolet Monte Carlo

2 Answers

P0441


i would have the front vacuume switching vavle checked

Apr 16, 2009 | 2001 Toyota Corolla

1 Answer

Trouble codes on a 96 buick riv


evap emission control system fault-po441, po742 is--torque converter curcuit stuck on, for this code, check torque converter clutch switch..

Apr 05, 2009 | 1996 Buick Riviera

1 Answer

96 corsica error cod po441 no purge flow


Look, that code means:
P0441 - Evap emission control system Incorrect purge flow

so try to replace the emission control.

Jun 15, 2008 | 1996 Chevrolet Corsica

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...