Question about 2000 Ford Focus

1 Answer

How to remove rear wheel assembly on a 2000 ford focus

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 500 Answers

Jack the car up and take the lug nuts off

Posted on Mar 14, 2011

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: what torque for rear wheel bearing Ford Focus 2000

Can only find out that the hub needs to be tightened to
235 nm Dunno if this helps

Posted on Jan 27, 2009

Murphybanton
  • 2004 Answers

SOURCE: I cannot remove rear wheels on 2005 ford focus

Because it has been on for a while you might need to hit hard with the wheel spanal to get it off.

Sorry

Posted on Aug 23, 2009

  • 101 Answers

SOURCE: I need to remove the

from looking at your part it looks like you will need a press to remove and install the new bearing most shops will do this for you at a reasonable price, you just have to remove the entire assembly for it to be pressed

Posted on Mar 19, 2011

Testimonial: "My son is doing the work and can not figure out how to get the hub assembly off. Needs step by step instruct to get assem. off"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I replace the rear struts?


Are we talking rear strut assembly with spring there 3 bolts on top in side trunk under carpet befor changing leave tires on unbolt struts raise car up bust lugs lose befor raing car . The reason for tires left on if u unbolt strut and spring decides to pop loose your legs and face are protected tire will save u safty if first

Nov 28, 2014 | 2000 Ford Focus

1 Answer

On my motorized gas bicycle the rear wheel wobbles what is causing that and how do I fix it?


Not sure about the Ford Focus issue?? If your motorized bicycle has wire spokes, they should be adjustable. Just tightening the spokes will pull the rim to that side. The opposite when loosening them etc.
If your wheels are of the mag type like a car, then maybe a bike shop can straighten out the wobble without more damage.

Jun 17, 2014 | 2000 Ford Focus

1 Answer

How do I get the rear drums off a 2000 Ford focus. I removed the spindle nut,


2000 Ford Focus Drum Removal ProcedureIf removing the drum to service the rear brakes: (note, do not remove hub retaining nut for this procedure)
1. Raise and support vehicle
2. Release the parking brake
3. Remove wheel and tire
4. Disconnect wheel speed sensor wiring harness from wheel knuckle and floor panel.
5. Remove 4 wheel spindle attaching bolts, then the wheel hub and drum assembly from vehicle.
6. Reverse procedure to install noting the following:
a. Torque wheel spindle retaining nut to 49 ft. lbs.
b. Torque wheel/tire assembly to 94 ft. lbs.
2000 Ford Focus Drum Replacement ProcedureIf replacing the drum and wheel bearing assembly:
1. Raise and support vehicle
2. Release the parking brake
3. Remove wheel and tire
4. Remove center dust cap.
5. Remove hub retaining nut.
6. Remove drum and hub assembly. Ensure wheel speed sensor ring is not damaged when removing drum/hub (if equipped).
7. Reverse procedure to install noting the following:
a. Inspect and clean wheel speed sensor ring if equipped.
b. When tightening hub retaining nut, rotate the hub assembly in counterclockwise direction.
c. Torque hub retaining nut to 173 ft. lbs.
d. Torque wheel/tire assembly to 94 ft. lbs.
e. Adjust parking brakes as necessary.


Jul 05, 2011 | 2000 Ford Focus

1 Answer

How do I change my lower contol arm, right side in my 2000 ford focus se?


remove the wheel. then take out the lower ball joint bolt.remove the tie rod from the assembly this makes it easy to swing the assembly back and forth. using a ball joint fork insert it between the the ball joint and lower control arm and wack the end on it till the ball joint separates from the control arm. using a pry bar put it thru the control arm so you can pry down on the control arm to release the ball joint then towards the back of the control arm are 2 nuts remove these and remove the cap that they hold towards the front of the control arm is one more nut remove this one and then pull out the control arm replace in reverse orderonetufshoppe_40.gifonetufshoppe_39.gif

Jan 24, 2011 | 2000 Ford Focus

1 Answer

Front wheel baring on ford focus


It has to be pressed in. Remove and try a machine shop.

May 04, 2010 | 2000 Ford Focus

1 Answer

How do i replace the rear wheel bearings?


There are 4 bolts on the back side to remove the assembly and then you have to have a press to remove the bearings from the drum/hub assembly

Apr 10, 2010 | 2004 Ford Focus

2 Answers

How to get headlamp out from ford fiesta 03


If you're just replacing the bulb, you access it from the rear of the headlight assembly. Just sqeeze the nylon locking device, and turn it counter clock wise, then pull the bulb out, and replace.

Dec 27, 2009 | 2000 Ford Focus

1 Answer

Where is the abs ring on the ford focus rear drums????? does it look like an oil seal on the on the bearing


The ABS reluctor is built into the rear wheel bearing assembly, and it must be replaced as a unit.

Nov 16, 2009 | 2000 Ford Focus

1 Answer

What torque for rear wheel bearing Ford Focus 2000


Can only find out that the hub needs to be tightened to
235 nm Dunno if this helps

Jan 26, 2009 | 2000 Ford Focus

2 Answers

Wheel bearing


The bearing might be a hub assembly in a Taurus, but it is a press in unit on a Focus. I have done it myself.

Jun 22, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...