Question about 1997 Ford Expedition

1 Answer

Need to replace heater core on my 97 expedition

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 461 Answers

UDER THE DASH BORD ON THE PASSINEGER SIDE

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change a blend door actuator on a 97 Ford Expedition


Lonnie. This is a hard job but heres your answer. I have done this twice myself but it was for heater core replacement the blend door is connected to the heater core assembly. Go to youtube and search "ford expedition heater core replacement". This video is outstanding the guy who made it points to all the hidden screws and bolts. It is an all day job just getting to the heater core. You have to drop the steering column and take off the whole dash to get to the door. both times i did this it took me 2 days. One day to disassemble and the next day to assemble. If you take to dealer be prepared to spend between 900-1200 dollars. The climate door only cost about 20 bucks. God bless you and keep me posted.

Feb 11, 2015 | 1997 Ford Expedition

1 Answer

Heater coil on a 1999 ford expedition how hard is it to change out?


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 03, 2010 | 1999 Ford Expedition

1 Answer

How do you bypass the water heater on a 97 Ford Expedition?


With long needlw nose pliers the longer heater hose needs to be removed from the heater core by grabbing the clamp squeezing it open and turning the hose till it comes free of the core, Follow the other hose to the place that it hooks to the engine and unhook it there and put the hose that you removed first on the engine. When you get the new core, the hoses will still be good and can be used with the new core. 2) the quick and more expensive way. Stop at an autoparts store and get a hose connecter and two hose clamps. Get out your sharp knife and cut the two hoses where you can get to them, put in the connector and tighten up the clamps. 3) Another way is to get plugs and hose clamps or reuse the old ones and remove the hoses and plug them the engine will cool OK this way too. Don't forget to refill the cooling system and recheck it after driving.

Aug 18, 2010 | 1999 Ford Expedition

1 Answer

1998 Expedition: 2000 Ford Expedition I smell antifreeze with heate...


If you smell antifreeze it may be 3 possibilities: 1. you may have a leaking hose/hose connector , or water pump. 2. your heater core is bad and needs replaced. Unless you know what you are doing I would highly suggest taking to dealer for heater core replacement. The dash and steering colum has to be removed to get to the heater core. This is not an easy job believe me (about-900-1200 job). If you have your heater core replaced then also replace the climate control door. This is good preventative maintenance and also a a dollar saver. I would have a pressure check run on your radiator as a first thought. All you may have is a bad hose and that can easily be replaced.

May 18, 2010 | 1998 Ford Expedition

1 Answer

Replacing heater core on 97 ford expedition


to replace the heater core the dash board need to be take apart.

Feb 17, 2010 | 1997 Ford Expedition

1 Answer

I need wiring color code for 97 Ford Expedition


red/yellow leads from the 5amp fuse #29 and red/white leads from 5amp fuse #2. Both of these run into the instrument panel. Let me know if you need more info.

Jan 25, 2010 | 1997 Ford Expedition

Not finding what you are looking for?
1997 Ford Expedition Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...