Question about Ford Windstar

1 Answer

Drivers side window will not roll up,passenger side works just fine there no clicking sound when you try to raise drivers side,fuses are ok

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 134 Answers

In certain Ford cars (you didn't say WHICH Ford vehicle you have), the motor that drives the power window has a plastic nut in it that facilitates the movement of the glass. Over time, this plastic nut will wear away and eventually won't turn the regulator (which makes the glass move up and down on its track). You can remove the motor, open up the casing of the motor, put in a metal nut and it will work again. I forgot the size of the nut, but they are common and can be found in a parts store for less than a dollar.

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power window


Sounds like a passenger switch malfunction.

Sep 08, 2013 | 2009 Mazda CX-9

4 Answers

2006 Toyota Avalon- Changed the battery and the driver side button to roll the passenger side window down doesn't work. The remainder of the buttons work, just not that single button. The passenger side...


try going to passenger door window switch and reset it by going down and holding for extra 3to5 seconds after window is down, do same to go up, then try doing it with master switch don forget to hold it longer, this is a reset also used on Scion vehicles, hope it helps.
Good luck

Jan 09, 2011 | 2005 Toyota Avalon

1 Answer

Passenger power window quit working...is it a fuse or breaker or what? The drivers window works fine.


hi, if the drivers window works fine then this suggests the fuse is ok, if you can control the passenger window from the driver side and it dont work and the switch on the passenger side dont work the window then this would point towards either motor or regulator at fault, if the drivers side and passenger side switch are the same then you can swap the switches over all you need to do is pry them out and unclip the wires and swap them over this way you can test if its the switch at fault or the motor.

let me know how you get on or if you need further assistance ok

Jun 13, 2010 | 1998 Chrysler Town & Country

1 Answer

Passenger window rolls down window but does not roll up


replace the switch. They have parts made of plastic pressing on the contacts softing these babies up making them useless in a few years

Jan 20, 2010 | 2005 Ford Explorer

3 Answers

Passenger window will not go up i think its


if the fuse was an issue then all the windows would be inop, not just one, the most common fault is the electric motor that runs the window up and down.

Oct 03, 2009 | 2003 Ford Expedition

2 Answers

2000 Ford expedition window problem


Sounds like you need a window motor. Try hitting in center of door trim panel to see if you can get it to work if so replace motor.

Jul 05, 2009 | Ford Expedition Cars & Trucks

1 Answer

97 Accord drivers side window won't go up or down....


Window motors & regulators go bad every day. Pull your door panel, unplug the motor, if you have an ohm meter apply the leads to the leads into the motor. One will be ground the other two will raise and lower (reverse) the motor. If you show resistance between the leads the motor windings are good and the problem may be the window regulator. If you do not have an ohm meter, you can run two wires (one ground, the other hot) and test the motor by applying elec to it.

Jul 02, 2009 | 1997 Honda Accord

2 Answers

Divers window won't roll up my Camry


No won't be fuse. My guess is there is something faulty with the main controller. You could probably verify this by trying the switch on right rear passenger door. If it works there then the problem is at the main controller in the driver door. Could be a loose wire or the switch itself is broken.

May 13, 2009 | 1986 Toyota Camry

1 Answer

Windows wont go down or up


Check the switches for a clicking sound if you hear a clicking sound then the switches are fine. Does the driver side switch work for the windows? Check it for the click sound. Make sure it isnt a blown fuse. If you have replaced the fuse and you dont hear clicking sound it might be the switches and you can find them at a junk yard. If you have tried all these things and it still doesnt work you might need new window regulators and/or window motors or it might be a wiring problem.

Mar 08, 2009 | 1995 Pontiac Bonneville

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...