Question about Lincoln Town Car

2 Answers

I need to know where to put the brake fluid - Town Car Lincoln Cars & Trucks

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 242 Answers

No idea I'm afraid - but if its low - you need to find out why - it shouldn't leak out - just putting more in could lead to more problems - if the fluid is leaking onto the brakes you could be in terrible trouble at the bottom of the hill!!

Check the brakes out or get them checked out!

GOOD LICK

Posted on Mar 13, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 158 Answers

In the brake master cylinder resevoir located under the hood directly over your steering shaft. You should see a rectangular shaped plastic cap. If you need to add brake fluid you need to have your brake system checked. You should never have to add brake fluid.

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I accidentally put brake fluid in the power steering pump of my 96 Dodge Ram


Do not start it brake fluid in the power steering. Will destroy the seal in the whole unit if you have started it you will need to take the return line off at the pump and flush it asap you can use trans fluid it has cleaner in it

Nov 03, 2012 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Brakes keep sticking,replaced both front calipers and brake hoses.i dont know what causes them to stick but the brake pedal comes all the way up and the car will not roll freely. i loosen the bolt used...


Sounds like the wrong fluid has been put into the brake master cylinder.if so,the seals in the master cylinder will need replacement and the whole system looking at and bleeding.Quite often ATF (automatic transmission fluid) gets put into brake systems by accident and this is always the result.You would need to flush the whole system out to get rid of the fluid.

Jun 20, 2011 | 1986 Toyota MR2

1 Answer

95 nissan altima brake light on ?


hello, check make sure, emergency brake handle is all the way down, check brake fluid, usually when light comes on you are low on brake fluid, also have front brakes,rear brakes checked out, you may need new brakes on front or rear, make sure there is know brake fluid leaking from your master cyclinder under the hood where you put fluid in brake resivor

Apr 08, 2010 | 1995 Nissan Altima

4 Answers

Where do you put the brake fluid on this car? Because, my car is making a grinding sound when I put my foot on the brake.


The grinding noise probably means you need to put new brakes on. If you fill the brake fluid reservoir, and then change the brakes, the new fluid will run out anyways, because the new brakes will have to be put in, and the fluid will run out.

Oct 01, 2009 | 1991 Dodge Spirit

2 Answers

Need to know what fluid to put in the clutch fluid res.


you can use dot 3 brake fluid from you local parts store, im using it in my 99 sunfire, but just ask them and they'll reommend there product.
As I see it the clutch and brakes work very similar to one another.

Aug 19, 2009 | 2005 Chevrolet Cavalier

1 Answer

Brake fluid


If you don,t know please ask a friendly mechanical type person to show , because you must put the right amount in. If you are losing brake fluid then you have a leak somewhere. Most lekly at the rear brake cylinder.

May 20, 2009 | 1997 Hyundai Accent

2 Answers

Where to put break fluid in the ford focus 2000


you put brake fluid in master cylender on driver side firewall . should not need brake fluid unless you got a leak or pads are worn down .

May 06, 2009 | 2004 Ford Focus

2 Answers

I dont know where to put the oil for the gear box


Brake fluid is the same fluid you put in the clutch master cylinder. Any mechanic will verify this.

Nov 20, 2008 | 2003 Mitsubishi Eclipse Spyder

2 Answers

Where do i put the brake fluid


on the driver side under hood there will be a small yellow cap on top of a reservior just in front the driver area. just open cap and install brake fluid until full.

Sep 10, 2008 | 2001 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

fordexpert

Level 3 Expert

5471 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...