Question about 2008 Ford Escape

1 Answer

How do you replace a turn signal bulb at the rear of a 2009 ford escape?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

On most Ford Trucks and SUV's there will be two philips head screws on the exterior of the light. Undo these two screws and the whole lens will pull outwards. Unplug the bulb and unscrew the retainer - reverse instructions with new bulb in place.
On a newer Ford, there may be an access panel inside the cargo area. If there is, you will gain access to the bulb and retainer from there.

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2011 Ford Escape driver side tail light not working correctly - lights are on but turn signal flash not working and neither is the brighter brake light


I would guess that you need a new bulb. Many of these tail lights actually have two filaments inside them, one that is used for a dimmer light (running light) and one that is used for a brighter light like (brake light, turn signal). The easiest thing to try (and probably the cheapest) would be to buy a replacement bulb and change it. Most places that sell automotive light bulbs will have a large catalog where you look up the make model and year of the car you need a light for and it will tell you which replacement bulb you will need. Then look in your cars manual to see how you access and replace the bulb.

Jan 30, 2015 | 2011 Ford Escape

1 Answer

I have a problem with the low beams on my headlights. The high beams works just fine. All of the other lights(turn signal, emergency lights, etc.) work except for the low beams.


Check the fuses first. then replace the turn signal switch if all fuses are good. All the lights run threw it, except the high brake light on the rear.

Jan 01, 2015 | 2003 Ford Escape

1 Answer

Reverse light not working on 2009 ford escape


First check the bulbs. To many times I have replaced bulbs. If bulbs are good then you have to go to the neutral safety switch. It on the drivers side of the transmission. You have power in, because other things work. Check power out. Usually a purple or purple/white wire. No power out. Replace the switch. Personally, I would just live with it.

Aug 20, 2014 | 2009 Ford Escape XLT

1 Answer

No tail lights on my 2008 ford escape. driver rear blinker wasn't working. replaced bulb, but when i turn on the blinker both blinkers are blinking...front and back...


Not sure I follow your story.
The front and rear turn signal should blink on one side. If the tail lamps are not working, it could be a fuse or a problem with the wiring. And the tail lamps are on the same circuit as the front parking lamps.

Feb 26, 2014 | 2008 Ford Escape

2 Answers

2009 ford escape turn signals and brake lights work but no taillights checked bulbs look good no where in owners mannual does it list tailight fuse or location


I think your problem locating the fuse may be because Ford refers to the lights you are describing as "PARK" lamps, instead of "TAIL" lamps. The PARK fuse is Fuse #22 (15 Amp) located in the Smart Junction Box (SJB) in the center of the dash.

HINT: This same fuse also protects the circuits your front park lamps, if they are working, the fuse is not blown.

Jun 02, 2012 | 2009 Ford Escape

1 Answer

Left turn indicator comes on dimly with application of brakes. No bulbs out.


Lots of possibilities, but the most common is a bad ground of the entire light assembly on the left rear.
That makes the left rear brake filament ground back up through the left rear turn signal ground, through the left rear signal filament, and all the way back up to the dash left indicator light, then finally to chassis ground. Just check if the left brake and left signal are both dim and come on together.

Sep 16, 2010 | 2006 Ford Escape

1 Answer

Tail lights not working on 2005 Ford Escape, recently replaced rear brake lights and turn signal lights. Did not fix problem. Which fuse is bad?


two fuses one for each side if fronts work fuses ok ,check bulbs again across a battery ,and make sure the bulbs are the correct fittings ,ie-single pole or double pole

Jan 07, 2010 | 2005 Ford Escape

1 Answer

HOW DO YOU REMOVE THE HEADLIGHT ASSY TO REPLACE THE TURN SIGNAL BULB


SECTION 417-01: Exterior Lighting 2001 Escape Workshop Manual REMOVAL AND INSTALLATION Side Lamp/Front Turn Signal Lamp Bulb Removal and Installation
  1. Remove the wheel and tire. For additional information, refer to Section 204-04 .
  1. Position the inner fender well aside.
    1. Remove the bolts.
    1. Remove the pin-type retainers.
    1. Remove the screw.
    1. Position the inner fender well aside.
  2. Remove the lamp socket from the lamp assembly.
  3. Remove the bulb.

06a0ca1.gif

Dec 01, 2009 | 2001 Ford Escape

1 Answer

Left turn signal light out how do i replace it


Again which turn signal bulb are you trying to replace on the left side,the front or the rear?

Mar 09, 2009 | 2003 Ford Escape

1 Answer

Replace ford escape turn signal front 2005


you should not have t remove the headlight assembly to replace the bulb access should be under the hood. as for the moisture the bulb holder may be damaged or not fitted properly

Oct 16, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2008 Ford Escape Logo

683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...