Question about Mazda CX-7

Open Question

Mazda CX7 (2007) remote start no longer works. changed battery on remotes, and checked "valet" setting

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Changing a battery on a Cobra 7777 remote control

tnanks, not interested.

Posted on Aug 21, 2008

Ad
  • 1 Answer

SOURCE: Need programming instructions for RKE for 2000 Mazda 626

2000 Mazda 626
Note: Make SURE the battery is new.
Instructions for programming ONE keyless remote fob.
1. Open the driver’s door & leave open.
2. Insert the key in the ignition.
3. Turn the key to the on and off position 3 times.
4. Remove the key from the ignition.
5. After door open chime stops, press the door open button 3 times.
6. After chime, press any fob key twice.
7. After second chime, press any fob key twice again.
8. After third chime, press any fob key twice again.
9. Press the door open button once.
10. The car should give another acknowledgement chime.
11. Test key fob.
This DOES work. I just programmed mine successfully today, three hours ago.

Posted on Nov 13, 2008

MrScary66613
  • 1990 Answers

SOURCE: Key remote battery replacement

Make sure that you have the Batteries Installed Correctly. If these Remotes take the Flat Round Batteries, Look and see if it tells you inside the Remote which way to Put the + On the Battery. Most of them have the + at the Top during Install. If it takes the Small Regular Battery, Looks like a Smaller AAA. You will need to Push the Connectors in a Bit Before you Install the Battery to make Sure that It connects with Both ends. Please Rate my Response, I need all the Help that I can Get! Thanks!

Posted on Jan 26, 2009

  • 740 Answers

SOURCE: Need to turn the valet switch off On 1999 Nissan Maxima

Look for alarm Brain box and look for wires coming out black and red going to valet switch. to turn valet on turn ignition in ON position and press-switch or flip depending on the type of switch. If it a basic alarm just disconnect the main wiring harness to alarm box- unplug and the car should start. Good luck and thanks for using FIX YA

Posted on Jan 27, 2009

  • 1986 Answers

SOURCE: 2007 mazda cx7

They're charging you for it? Since your car's only 2 years old, they should be covering it under warranty. Timing Chains don't break normally, and when they do, usually it's on a much older car. Mazda should be covering the costs for this under the power train warranty (which is good for 48 months or 50,000 miles, whichever comes first)



Posted on Sep 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote start locks doors but won't turn over engine, installed by dealer, two remotes do the same. Changed batteries in remote.where is the kill switch?


most remote starters have a valet feature to turn off the starter but allow locks/trunk to continue to work. all brands vary..

Jan 04, 2016 | 2013 Hyundai Santa Fe

1 Answer

How to change the battery in a jaguar XF smart key


1) Carefully remove the plastic silver sleeves on each side of the remote.
2) Carefully open the remote to expose the battery -- try to keep the circuit board and valet release pin from falling out.
3) Replace battery -- plus (+) side down
4) Before closing body of remote, take note of valet key release pin & spring. Be sure the spring and pin are in the correct position (see pic).
5) Carefully close body of remote.
6) Before attaching sleeves to remote body, be sure the notched end of the sleeve is aligned with the valet key.
7) Carefully slide silver sleeves onto each side
8) Test
change-battery-in-jaguar-xf-smart-key-c4xwafwrcxpjyaxsfmhtpc1n-4-0.jpg

change-battery-in-jaguar-xf-smart-key-c4xwafwrcxpjyaxsfmhtpc1n-4-2.jpg

change-battery-in-jaguar-xf-smart-key-c4xwafwrcxpjyaxsfmhtpc1n-4-5.jpg

change-battery-in-jaguar-xf-smart-key-c4xwafwrcxpjyaxsfmhtpc1n-4-9.jpg

Apr 24, 2014 | 2009 Jaguar XF

1 Answer

Valet remote car starter


no year car?
no model or sub model?
is this a factory installed options? y/n
sure , stronger battery can give you more RF signals (it's a radio transmitter, and as such will be weak if battery is low.)

Jan 22, 2014 | Honda Cars & Trucks

1 Answer

How do I reset alarm 2001 honda civic


Have you tried using the valet override, [disarm without remote] switch?

Have you checked to make sure remote start switch is on?

Oct 26, 2012 | 2001 Honda Civic

1 Answer

Remote Car starter won't work


put your key in the ignition, then remote start it, if it starts, you need to either move the transponder loop of key or reprogram the transponder or take it to a remote starter shop

Jan 13, 2010 | 2003 Honda CR-V

2 Answers

Lost remote to alarm on 1996 honda civic need to change battery


I had this happen today and called an alarm installer. he said to connect the battery cable (id unhooked it to stop the blaring) then open the door to set off the alarm. then torn on the key ( even tho it wont start the car , turn it on anyway) then look for a toggle switch ( AKA a valet switch) with the key in the on position flip the switch. ( when I did this a noticed a tiny red light come on to the left of the steering column) I turned the toggle back to the original position and then I tried to crank -AND IT CRANKED WITH NO SCREAMING ALARM!!! I was so happy, I had to post this in case it could help someone else.

Jun 10, 2009 | 1996 Honda Civic

1 Answer

Need to turn the valet switch off On 1999 Nissan Maxima


Look for alarm Brain box and look for wires coming out black and red going to valet switch. to turn valet on turn ignition in ON position and press-switch or flip depending on the type of switch. If it a basic alarm just disconnect the main wiring harness to alarm box- unplug and the car should start. Good luck and thanks for using FIX YA

Jan 26, 2009 | 1994 Nissan Maxima

2 Answers

Alarm wont let me start the car


you need the remote control of the alarm to turn the alarm off.

you may need to change the battery of the remote in case it would no longer control the alarm or if you have a valet switch to turn off the alarm, then use it.

the immobilizer is working that is why you can not start the car.

tnx 4 using fixya,

drcool

Sep 13, 2008 | 1994 Nissan Maxima

3 Answers

Changing a battery on a Cobra 7777 remote control


The battery in the 7777 remote is a CR2032. If upon changing the battery the remote fails to work then you should stand next to the car and hold down both remote buttons for around 10 seconds to reactivate it. The remotes LED will flicker rapidly during this process. Keep holding both buttons until the LED stops flickering then release both buttons. The LED should now be on constant, press the larger of the two buttons and the remote should now be re-synced.
Note: This procedure is not to program the remote to the alarm, but to re-synchronise it.

Aug 20, 2008 | 1999 Mazda 626

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...