Question about Land Rover Discovery

Open Question

How to instal ? hella 3sb 004.438.161 - Discovery Land Rover Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Installing Tire Pressure Monitoring in Older Wheels

I wanted to install the Hella TC-400 tire pressure monitoring system on a set of '80s vintage Alpina wheels to be used on my '72 2002tii. Older wheels are not necessarily suited for mounting the valve stems that incorporate tire pressure senders. The people at TireRack were very helpful and sent me a dead sender that I could use for a trial fitting. I mounted the valve/sender in the wheel and sent them photos showing the mounting angle etc. It all works fine! Please make sure your tire mounting person knows what they are doing and warn them that you have the senders mounted. See
Now I have a modern tire pressure system on a 38-year-old car!

on Jan 23, 2010 | BMW 3 Series Cars & Trucks

1 Answer

How to remove headlights to replace bulb on twin hella.

Most German type Hella lamps are removed from inside the hood/bonnet with a quarter turn twist, and then pull straight out, remove the wiring connector first and see which way it gives when turning gently. Replace your lamp with the proper replacement from OSRAM. They make more improved versions than the OEM includes with your car. Hella uses OSRAM/Sylvania (USA) bulbs as std.

Mar 21, 2015 | Cars & Trucks

1 Answer

1985 Monte Carlo is shakeing bad

Have you run basic tests on this car like fault code tests and other engine mechanical tests like compression tesing?

Apr 21, 2013 | 1985 Chevrolet Monte Carlo

1 Answer

Have hella 24v flasher unit with pins 30,49 and 49a how do i connect it

pin 30 is from your power source
pins 49 and 49a goto the lights themselves

Feb 02, 2010 | 1997 Land Rover Defender 90

1 Answer

Is it possible to put a xenon headlight conversion kit in a 1990 toyota pick up?

yes hella makes a h4 bulb retrofit kit. It includes new housings the use a replaceable h4 bulb. then purchace a hid h4 kit and install. I got th hella kit from summit for around $50 and used xtratights kit its a direct plug in no cuttting needed

Nov 02, 2009 | 1990 Toyota Pickup

2 Answers

I want to install fog lights on my 1996 Chevy Cavalier. I am not quite sure about the wiring. I know I could do it myself with a little help from you guys or girls.

Depends on how you want to have them come on. On a switch you just control you would have the switch control a relay that is supplying power for the fog lamps. If you want them on all of the time find and ignition wire to conrol the relay for the lights.
The common thing in both of these systems is a relay. You must put one in the system. The fog lamps will draw to much amperage for a toggle switch.

Oct 11, 2009 | 1996 Chevrolet Cavalier

1 Answer

How to wire Hella 500 lights to a 97 Jeep TJ. I don't have the instructions

I have a Jeep ZJ, and the installation is very easy; this is the result...


For the installation guide, you must check all the wire connections...

1. Power Dependent (work with high light)


2. Independent Power (with switch)


I'm using the second system. Or, maybe you can use the Instruction Sheet Driving Lights for Hella 500.

I hope help you with this (remember rated this help) Good luck.

Sep 15, 2009 | 1997 Jeep Tj

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides