Question about 2000 Chevrolet Silverado 1500
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need a charcoal canister and vent control valve.
You also need the EGR solenoid valve (I think it the brown one).
Valve is located in the valley of the V, towards the transmission side of engine.
Do these 1st and reset light. You may have other issues but you have to start here.
Posted on Sep 16, 2008
SOURCE: car codes
When you have P0440, P0441 and P0446, it is a very good bet that the fuel cap was loose, or the fuel cap rubber seal is compromised. You will get all three of those codes every time that the cap is loose. Always make sure that the fuel cap is as tight as you can get it after you refuel.
Posted on Nov 13, 2008
most p0440 codes are related to gas cap problem check cap and reset code if it the problem code pops problem with a fuel line follow lines from filler neck down and under vehicle[ look for smell of gas or cracked line] all the way up to throttle body if have leak fix asap
Posted on Sep 26, 2009
Here's list why your car is coming up with this code. It could be any of these things causing it.
DTC detecting condition:
Posted on Apr 01, 2010
SOURCE: check engine light is on-
Causes: A code P0440 could mean one or more of the following has happened:
* The gas cap is not installed or working properly
* The purge solenoid has failed
* The canister is plugged and not working properly
Possible Solutions: With a P0440 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
* Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
* Inspect the EVAP system for cuts/holes in tubes/hoses
* Inspect for damaged or disconnected hoses around the Evap purge solenoid
* Check and/or replace the sensor
* Check and/or replace the purge valve
* Have a professional use a smoke machine to detect leaks
Hope helps (remember to rate this).
Posted on Oct 12, 2010
Tips for a great answer:
Feb 25, 2013 | 2002 Toyota ECHO
Aug 19, 2011 | 2004 Toyota ECHO
Oct 20, 2010 | 1997 Subaru Legacy
Jan 30, 2010 | 2000 Pontiac Grand Am GT
Sep 21, 2009 | 2002 Chevrolet TrailBlazer
Mar 29, 2009 | 1997 Toyota Camry
Mar 22, 2009 | 2003 Chevrolet TrailBlazer
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: