Question about Chevrolet 1500

1 Answer

I have a 98 silverado with a multiple misfire im getting a p0300 code ive replaced evrything except for the coil and o2 sensors.

Posted by on

  • Ian Mar 13, 2011

    I changed the fuel pump ill try cleaning the mass airflow would a bad o2 sensor or coil caus this?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

MULTIPLE MISFIRE CAN BE CAUSED BY.CLOGGED FUEL INJECTORS.ADD A CAN OF SEAFOAM TO A 3/4 TO FULL TANK OF GAS.CHANGE FUEL FILTER, IF ALL READY CHANGED SPARK PLUGS AND WIRES.A WEAK FUEL PUMP AND A CONTAMINATED MASS AIR FLOW SENSOR WILL CAUSE LEAN MISFIRE CONDITIONS.

Posted on Mar 13, 2011

  • 1 more comment 
  • Jonah Oneal Mar 14, 2011

    YEP BAD COIL CAUSE MISFIRE.IF YOU HAD BAD 02 OXYGEN SENSOR THE CHECK ENGINE WILL TURN ON AND CODE SCANNER WILL TELL YOU YOUR OXYGEN STAYING OPEN LOOP. GOOD O2 OXYGEN SENSOR IF GOOD YOUR SCANNER WILL SHOW CLOSED LOOP.

  • Ian Mar 14, 2011

    im pulling a code p0300 and its in closed loop would a bad crank sensor or defective distributor cause this?

  • Jonah Oneal Mar 15, 2011

    BAD CRANK SENSOR WILL CAUSE NO START PROBLEMS. IF ALL CYLINDERS MISFIRING.PROBLEM IN THE FUEL SYSTEM.CLOGGED FUEL FILTER.BAD DISTRIBUTOR COIL WILL CAUSE MULTIPLE CYLINDERS MISFIRE.WHEN I CHECK O2 SENSOR USING SCANNER I RUN LIVE DATA SCAN SO I CAN SEE ALL THE SENSORS WHILE CAR ENGINE RUNNING,WHEN I CHECK O2 SENSOR WITH SCANNER IT SHOULD BE IN CLOSED LOOP WHEN ENGINE IS IN OPERATING TEMPERATURE.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ReNissan P0300


a misfire can be mechanical as well as electrical
code p 0300 is random/ multiple misfires detected
low fuel pressure is a probable cause from a problem fuel pressure regulator or problem EVAC system not venting properly causing a vacuum in the tank and starving the pump
erratic could be from valve problems on heating
loose valve seat insert/s, incorrect valve clearance from faulty hydraulic followers, cam shaft lobe failures are all part of the mechanical reason for random /multiple misfires

Oct 01, 2016 | Cars & Trucks

1 Answer

Check engine light code p2196,p2197, po300 ,304,305,306,p2 ,Im freeking out.


P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder 1 Misfire Detected P0302 Cylinder 2 Misfire Detected P0303 Cylinder 3 Misfire Detected P0304 Cylinder 4 Misfire Detected P0305 Cylinder 5 Misfire Detected P0306 Cylinder 6 Misfire Detected P0307 Cylinder 7 Misfire Detected P0308 Cylinder 8 Misfire Detected P0309 Cylinder 9 Misfire Detected P0310 Cylinder 10 Misfire Detected P0311 Cylinder 11 Misfire Detected P0312 Cylinder 12 Misfire Detected P0313 Misfire Detected with Low Fuel P0314 Single Cylinder Misfire (Cylinder not Specified) P0315 Crankshaft Position System Variation Not Learned P0316 Misfire Detected On Startup (First 1000 Revolutions)

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com
-----------------------------------------------------------------------
P2195 O2 Sensor Signal Stuck Lean Bank1 Sensor 1 P2196 O2 Sensor Signal Stuck Rich Bank1 Sensor 1 P2197 O2 Sensor Signal Stuck Lean Bank2 Sensor 1 P2198 O2 Sensor Signal Stuck Rich Bank2 Sensor 1

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com http://www.obd-codes.com/p0002

May 07, 2015 | 2006 Ford Taurus SEL

3 Answers

Codes P0300 P0302 P0303 P0304 P1176 P0133 P1300 P1580 P1543 B0423is running but having trouble building speed and going up hills


Codes p0300 random misfire, p0302-0304 misfire cylinder 2-4. P0133 o2 circuit slow response bank 1 sensor 1. P1176, P1300, P1580, P1543, B0423 r make specific which you didn't say this would cause the problems you are having.

Apr 07, 2015 | Cars & Trucks

2 Answers

98 silverado random misfire


run a compression test to check for loose valve seat insert . no 1 cylinder
other wise it is a fuel pressure problem and faulty injector/s

Sep 26, 2017 | Cars & Trucks

1 Answer

2001 silverado po300 code and po135 code changed 2 o2 sensors still coming up have not changed driver side o2s yet


Well the P0300 code has nothing to do with your O2 sensors just a heads up.

P0300: Random/Multiple Cylinder Misfire Detected

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the crankshaft position (CKP) sensor (POS) signal to vary, Powertrain Control Module (PCM) or Electronic Control Module (ECM) can determine that a misfire is occurring.

Causes:
- Improper spark plug
- Insufficient compression
- Incorrect fuel pressure
- The injector circuit is open or shorted
- Fuel injectors may be faulty
- Intake air leak
- The ignition signal circuit is open or shorted

Solutions:
- Perform Injector Service
- Replace Spark Plugs
- Replace Injectors
- Replace Ignition Coils

P0135: O2 Sensor Heated Circuit Malfunction Bank 1 Sensor 1

The front heated oxygen sensor (or sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the ECM. The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.

Causes:
- Harness or connectors (The sensor circuit is open or shorted)
- Front Heated oxygen sensor (Bank 1) may be faulty

Solutions:
Replacing the O2 Sensor 1 usually takes care of the problem

Jan 27, 2011 | 2001 Chevrolet Silverado 1500

1 Answer

P134, p0141, po300, po130 and po135. 2005 Sunfire.


Given that most of the trouble codes are for the O2 sensor, I think I would change it. The multiple misfires could be because of improper fuel/air mixture caused by a bad sensor. Disconnect the negative(-) battery terminal then change the sensor. Disconnecting the negative(-) should reset the computer and allow the fuel/air mixture to return to default allowing the engine to start.
P0130 - O2 Sensor Circuit Malfunction (Bank 1 Sensor 1)
P0134 - O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1)
P0135 - O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)
P0141 - O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
P0300 - Random/Multiple Cylinder Misfire Detected

Jun 16, 2010 | 2005 Pontiac Sunfire

1 Answer

02 sensor p0136 and cylinder misfire p0300


Most likely you do not have bad O2 sensor or coil sience you have P0300 code.
Check for vacuum leaks first , this is very common problem(vacuum leak) , lean mixture will cause misfire. I'm tallking about V6 engine , 4cyl have same problems but for misfire it may have bad coil (they under recall now).
Also check condition of air mass sensor , if it's dirty ,
buy air flow sensor cleaner and clean it according to user manual on the can.(air mass sensor can cause
O2 sensor code)
Check vacuum hose to fuel pressure regulator.
There are many more things to check , but that for mechanic shops after you try this.

Jun 10, 2010 | 2001 Audi A4

1 Answer

Obd2 code p0300 on mazda protege 2002


Just had one of these with a maxima, the code is multiple random misfire, when a misfire occurs, to start is do the basics, replace the plugs, check fuel pressure, clean throttle body, and coolant is topped up. also I have seen if the O2 sensor is not working correctly is can cause a misfire, you will need a scan tool to look at what the O2 sensor is doing, o rby back probing the sensor (don't damage the O2 sensor wires). If it wires replace them as well, if it has coils they usually dont give that code if one fails, it will pinpoint that a certain coil if one fals.

Oct 02, 2009 | 2002 Mazda Protege

3 Answers

Codes 1133-0131-0171-0300


p1133 - o2 sensor, Insufficiant Switching, Bank 1 Sensor 1.
p0131 - o2 sensor circuit, low voltage, bank 1 sensor 1
p0171 - Lean condition, Bank 1
p0300 - Random Misfire

I would be looking at the front passenger side oxygen sensor for issues. It may be bad, it may not be plugged in, bad wiring at harness.

The random misfire may be symptomatic of the o2 sensor problem.

Mar 17, 2009 | 2002 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

598 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...