Question about 2006 Ford Crown Victoria

1 Answer

The abs and brake light stays on i dont know what to do please help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

The abs has a on board computer that runs the system. it checks itself every time you start the vehicle. when its operating normally, the abs light will come on briefly during start up and then go out. if there is a problem detected in the system, the light will come on at start up and remain on until the problem is fixed. since this is a safety issue, i would tell you that the only thing you can do yourself is check to see if maybe a fuse went in the system (the fuse may be in the car or under the hood). if you find no fuses blown, you should contact a repair facility to properly diagnose and repair the system. they will need to hook up the car to a computer so they can diagnose the system and find the fault. the brake light also comes on to notify you of a problem in the braking system (lack of abs assist) you should still have brakes, just not anti lock so adjust your driving appropriately and get it to a shop.

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ABS warning light stays on


One of your wheel sensors are defective. Have a mechanic troubleshoot it. You can still drive without the ABS. Your regular brakes will still work.

Feb 04, 2016 | 1996 Jeep Grand Cherokee

1 Answer

Abs light stays on and brakes hard to push


Abs which stands for anti brake system has failed. In most cases replacing the control senor for abs will fix the problem. Where it is located on your car i dont know . Call your local autozone and they will help you out... Hope this helps and Please rate this post.

Aug 14, 2012 | 1992 Dodge Dynasty

1 Answer

Can I (safely) disable my 1999 Range Rover 4.6 ABS and Traction Control by removing the 5amp fuse, 30amp fuse, or ABS relay from the engine compartment fuse box? I don't want ABS or Traction control on for...


I have a 1998 Range Rover HSE. The ABS, TC amd Brake light stay on and now I have noticed that it is becoming harder and harder to stop. It literally feels like I dont have any brakes at all. I have to pretty much push the brake petal all the eay down in order to get it to stop. I had the pads and rotors about 6 months ago and I don't know what to do! Help please

Sep 30, 2010 | 1999 Land Rover Range Rover

1 Answer

The ABS light stays on whilst driving on a Honda CRV


Hello. This indicates that you have a bad sensor or a problem with the antilock braking system [ABS]. If your brakes no longer pump themselves when you make a quick stop you know that the antilock braking system is not working. If they still pump, the problem is more likely in sensor to the ABS system. Joe

please rate my answer as very helpful. Thank you.

Apr 20, 2010 | 1997 Honda CR-V

1 Answer

Abs and brake light staying lit


First you have to plug in a OBD II reader and pull any codes. From there you can start to diagnose the problems.
Do not wait, the abs (anti-lock brake system) is important and may affect your braking.
Please let me know what you find.

Feb 10, 2010 | Suzuki Swift Cars & Trucks

1 Answer

2006 Town & Country ABS light stays on


when the abs light comes on your car is letting you know that it has shut down the abs system because of a problem. so you are braking with regular conventional brakes which is perfectly safe. any time a component of the antilock brake system malfuntions the abs system is shut off and the light will come on to let you know. the most common problem is that the wheel speed sensors go bad. a trouble code will be stored in the abs control module you can have the abs module scanned to see what the problem may be. But dont worry you car is safe to drive. you just dont have the antilock brake option.

Nov 02, 2009 | Chrysler Town and Country Cars & Trucks

1 Answer

1993 voyager V6 ABS light stays on


You might need a scanner to remove the fault code from the ECU's memory.

Sep 03, 2009 | 1993 Plymouth Voyager

1 Answer

My abs brake light is staying on , and the brakes work well , can


no worry all u have to do is make sure all the ABS sensors a plug all the way in
if so yo h ave to reset the computer disconect the batery for 10 minutes
if that dont work have check at any close brake shop u know

Jun 06, 2009 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2006 Ford Crown Victoria Logo

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...