Question about 2004 Mitsubishi Eclipse

1 Answer

I have a eclipse 2004 4 cycl. I gonna install OEM fog ligths, on the passenger side there is a electrical cable and connector for the fog light, but on the drivers side there is not one, can use the same cables connection with extension to connect together the drivers side with the passengers, any advice would be grateful.... Thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 7,743 Answers

Hi, if you're sure the cable is intended for the OEM fog lights, there should be no problem. All that is required is that the cable and fuse is large enough for the 2 lights. Make sure there is a fuse and that it doesn't burn when the lights are turned on. Please let me know if you have more questions, and thanks for using FixYa.

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just bought two flood lamps to fit to the bumper of my 95 jeep wrangler, how would i wire them to a toggle switch?


  1. 2-wires on each fog ligth
  2. toggle switch 2-hook up
  3. okay run hot wire from battery to one side of toggle
  4. on fog ligths one wire migth be white or black
  5. take one of the wire on fog ligth (white)&other fog ligth (white)wire
  6. take a wire hook both white wire from both ligths an hook to this wire an run it to the other side of toggle
  7. black wire on ligths hook them to ground
  8. after you hook the ligths up an they work it best to put a fuse connector between one of the wires on toggle

Dec 06, 2010 | Jeep Wrangler Cars & Trucks

1 Answer

I need to replace the driver's side brake light.


Rear Combination Light- 2007 might vary from these diagrams:
Removal & Installation 2004 (Early Production) 4 Door To Remove:
  1. Disconnect battery negative cable.
  2. Disconnect electrical connector. Rear Combination Light kia-06-18-7495.gif

  3. Remove 2 screws and 2 nuts and remove light assembly.
To Install:
  1. Install light assembly and 2 screws and 2 nuts.
  2. Connect electrical connector.
  3. Connect battery negative cable.
5 Door To Remove:
  1. Disconnect battery negative cable.
  2. Disconnect electrical connector. Rear combination light kia-06-18-7496.gif

  3. Remove 2 screws and push light assembly toward outside of vehicle. CAUTION
    Use care to not damage gasket.
  4. Pull rear combination light from vehicle.
To Install:
  1. Install rear combination light and 2 screws.
  2. Install 2 screws.
  3. Connect electrical connector.
  4. Connect battery negative cable.
2004 (Late Production), 2005-2009 To Remove:
Turn Signal Lamp kia-06-20-7698.gif

  1. Disconnect battery negative cable.
  2. Remove 2 screws and cover inside trunk.
  3. Remove 4 nuts and disconnect electrical connector (A).
  4. Remove rear combination lamp.
To Install:
Turn Signal Lamp kia-06-20-7698.gif

  1. Install rear combination lamp.
  2. Install 4 nuts and connect electrical connector (A).
  3. Install cover inside trunk and install 2 screws.
  4. Connect battery negative cable.
prev.gif next.gif

Oct 28, 2010 | 2007 Kia Spectra5

1 Answer

Passenger headlights only do not operate.


check the bulbs first and also the fuses theres a fuse for each side and for low and high beams, start there, good luck.

Feb 19, 2010 | 2002 Mitsubishi Eclipse Spyder

1 Answer

Fog lights do not work on a 1999 9-3 SAAB. no blown fuses and not power at fog light connector, looking for a schematic.


I had same problem in my 1995 saab900,
the fog light contains a bulb and two cables (ground and hot).
the ground cable connects to the bulb base by a connector, this connector collects salt because of the high current and humidity I guess, which made inconductive.
Just cutting the connector and solder the cable directly to the bulb base solved the problem.

the schema is like that:
1- foglight switch give low current to a relay under the hood.
in the same time the switch will get current from the normal ligth so it wont work untill you put the lights on.
2- the current goes from to the relay makes the relay connects the fuse current (from battery via fuse) to the ligts directly.
so the connection is straight forward.

the components involved are:
1- fog light switch.
2- fuse inside the car on the left side of the stearing wheel.
3- fuse under the hood to the top right side of the engine if you look at it from the car front.
4- in the same fuse box under the hood there is a samll relay.
5- cables takes the current from the relay to the foglights.
6- the fog lights have a connection at the back, and connection inside.

make sure you measure each points with a multimeter and in doubt make temporary cables like ground directly to the battery to make sure you don't miss anything.
good luck and email me if you still have problem
ausrasul@gmail.com

Nov 08, 2009 | 1999 Saab 9-5

2 Answers

2004 Saab 9.3 Conv Passenger side front & rear fog lights will not work. New bulbs. Why? What to do? Is there a fuse for just those on right side? All other lights work fine.


Sounds like similar problem I had on my older 93 - one side main beam and brake light not working. Turned out to be a problem with the filament testing relay. Got it resoldered and now ok.

Oct 16, 2009 | 2008 Saab 9-3

1 Answer

What size bulb is an audi s4 headlight and fog light?


SYLVANIA H7 SILVERSTAR HIGH PERFORMANCE HALOGEN HEADLIGHT BULB -- 55 Watts, Single C-8 filament for use as either high beam or low beam; 100 percent legal halogen headlight bulbs; Features the whitest and brightest light colour similar to daylight for safer night driving; Meets all US FMVSS 108 and Canadian CMVSS 108 requirements. Fits Driver or Passenger Side Driver or Passenger Side Fits the following vehicle/s
2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L RAMPAGE FOG LIGHT, BLACK METAL HOUSING, With round clear lens; Includes 100-Watt H3 halogen bulb, one lamp and a single bolt mounting system; Provides better illumination Fog Light

  • Fits the following vehicle/s: 2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L;

Jun 24, 2009 | 2004 Audi S4

1 Answer

R&R passenger side fog light


The plastic bracket that holds it in has either a 10mm or 8mm holding onto underneath but if you need to replace bulb you dont have to remove the entire assembly

Jun 21, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

How do you replace the fog light bulbs on a 2004 buick regal?


Notes FOG LAMP BULB REPLACEMENT - FRONT

REMOVAL PROCEDURE
f98bf40.gif
  1. Remove the front bumper fascia deflector.
  2. Disconnect the electrical connector from the front fog lamp bulb/socket. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
01c84b0.gif
  1. Rotate the front fog lamp bulb/socket counterclockwise to release.
  2. Remove the fog lamp bulb/socket from the front fog lamp assembly.
4065803.gif


  1. Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
b182709.gif
  1. Connect the electrical connector to the front fog lamp bulb/socket.
  2. Install the front bumper fascia deflector.

Jun 16, 2009 | Buick Regal Cars & Trucks

2 Answers

Hhr fog lights


yes it is you will probably have to have the bcm programmed for the foglight option if your gonna install like factory is

Sep 22, 2008 | 2007 Chevrolet HHR Special Edition

Not finding what you are looking for?
2004 Mitsubishi Eclipse Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...