Question about 1993 Saturn SL

1 Answer

How to bleed clutch on 1993 saturn sl manual tranmission

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 114 Answers

Clutches can be a swine to bleed. The best way is to do it reversed. You need an irrigation syringe from a pharmacy and a bit of hose that will fit over the open bleeder on the clutch cylinder and the end of the syringe. Then you inject the fluid while someone else tells you to stop when the fluid level gets to the proper height in the reservoir up top. Close the bleeder and you're done. If you cannor organize these things, open the bleeder and put your finger over it with light pressure. Have someone pump the clutch pedal and hopefully you will feel a little pressure that you can let escape with every push. Some cars require several hundred strokes, I once counted 700 on a Saab. So the syringe thing is worth the trouble. If you do it the finger method, don't let the reservoir run out!

Posted on Mar 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have 1998 Saturn SL clutch was slipping The peddle was fine shifting was fine it would just slip when put in gear. Ordered new clutch pressureplate and bearing. Took to a shop they tell me thy just need to...


SOUNDS TO ME ALL THEY TO DO WAS TO ADJUST THE CABLE THAT RUNS FROM YOUR PEDAL TO YOUR CLUTCH,ESPECIALLY WHEN YOU HAVE REPLACED THE ITEMS YOU REPLACED

Mar 30, 2012 | 1996 Saturn SL

1 Answer

Gears are hard to change. clutch releases low.


check your clutch fluid .its on drivers side under hood, on the fire wall . It takes brake fluid. If it is vary low or nothing at all , you may have to bleed the system .

















Feb 16, 2011 | 1993 Saturn SL

1 Answer

How to bleed the clutch on a saturn 97


one way to bleed it is by pulling the piston like slave cylinder with the rod out of the transmission and by pushing the rod into the slave cylinder several times, make sure you have plenty of dot3 brake fluid in the clutch master slave before you do this. by pushing the rod into the slave cylinder it acts like doing a brake job it bleeds the air out into the clutch master slave cylinder and sucks in the break fluid getting rid of all air in the system. thats the only way to bleed those systems seeing as they are sealed systems

Aug 22, 2010 | 1997 Saturn SL

1 Answer

After bleeding the clutch in a 2000 Saturn, where do you put the fluid in?


is there a line you can follow from the clutch slave cylinder to the fire wall and does it go into the brake master cylinder? if so top up the brake master to the max level and no more

Jun 05, 2010 | 2000 Saturn SL

1 Answer

How do you bleed a clutch cylinder on a 2000 sl saturn?


try hooking up a vacuum pump at clutch cylinder fitting,  open  fitting , and pump down while continuing to  fill reservoir, when air bubbles stop flowing with fluid, tighten fitting   

Sep 12, 2009 | 2000 Saturn SL

2 Answers

Need to know how to bleed it


There would be a bleed nipple on it. It would be located near the bellhousing.
Open nipple a little let fluod seep out until no bubbles in it. Make sure you top the fluid up and dont let it empty.

May 04, 2009 | 1997 Saturn SL

2 Answers

Need to know where slave cylinder nipple is


I just installed a new clutch master cylinder and was not able to bleed the system however; I continued to pump the clutch many, many, many times. Simply moving fluid and eventually I bagan to get a little pedal back. I then figured that if I parked the car on a downward slope the resivoir would be the tallest component and residual air may rise up ward. This is only a theory and I haven't proven its effectiveness yet. So far, only a little pedal.

Mar 12, 2009 | 1996 Saturn SL

1 Answer

93 saturn clutch


No not if you have the proper hand tools and good mechanical skill, bleeding the air out is the big one, if I were you I would leave it to the pro's.

Oct 09, 2008 | 1993 Saturn SL

Not finding what you are looking for?
1993 Saturn SL Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...