Question about 2001 Oldsmobile Alero

1 Answer

Need bottom mounting bracket for radiator - 2001 Oldsmobile Alero

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 144 Answers

You can get the mounting bracket at a dealer OR at a wrecking yard.

Posted on Mar 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the radiator in our 2003 Centre ? Looks as if mounts are in way. Just did hoses so I know basics , but don't know surprises.


first off all u will need to undo the hoses and then locate the brackets holding the radiator
there might be other pipes or brackets In the way that u will also need to undo
brackets should be situated on the top or side of the radiator and pushes in to rubber grommets at the bottom

Jun 12, 2015 | Cars & Trucks

2 Answers

Need to remove radiator


YOU NEED TO DRAIN RADIATOR AND ENGINE BLOCK.NEED TO DRAIN THE BOTTOM WATER PIPE.DISCONNECT THE TOP AND BOTTOM WATER HOSES.SEPERATE THE UPPER FROM THE LOWER RADIATOR SHROUD AND REMOVE THE UPPER SHROUD FROM THE CAR.REMOVE THE CROSSMEMBER AND HEADER TANK.REMOVE THE CONTROL ROD FROM THE DRAIN TAP.REMOVE THE LOWER MOUNTING SCREWS AND RUBBER MOUNTING CUSHIONS.THEN LIFT OUT THE RADIATOR.IF CAR HAS AIR CONDITIONER YOU NEED TO DETACH THE CONDENSOR FROM ITS MOUNTING BRACKETS DONT DISCONNECT ANY CONDENSOR REFRIGERANT LINES. YOU NEED TO SUPPORT CONDENSOR WITH SOME WIRE TO KEEP IT FROM FALLING BEING DAMAGED.

Sep 11, 2011 | 1993 Jaguar XJ6

1 Answer

How to remove starter from 2004 pacifica


REMOVAL
Disconnect the negative battery cable.
Remove (UPPER RADIATOR CROSS MEMBER) and relocate (UPPER RADIATOR CROSS MEMBER REMOVED) the upper radiator crossmember, (Refer to 23 - BODY/EXTERIOR/RADIATOR CROSSMEMBER - REMOVAL).
Remove the radiator fan module (FAN MODULE IN VEHICLE) (Refer to 7 - COOLING/ENGINE/RADIATOR FAN - REMOVAL).
Remove the wiring harness clip from front mount.
Remove the coolant line clamp bolt (COOLANT LINE BRACKET).
Remove the upper nut from the front mount (FRONT RUBBER MOUNT UPPER NUT).
Remove the upper starter mounting bolt (UPPER STARTER BOLT).
Remove the middle starter bolt (MIDDLE STARTER BOLT).
Raise vehicle and support.
Remove the lower front mount nut (FRONT RUBBER MOUNT IN POSITION).
Raise and support engine (SUPPORT ENGINE).
Remove the lower bracket bolt to transmission (BRACKET TRANS BOLT).
Remove the lower bracket bolt to engine block (BRACKET ENGINE BLOCK BOLT).
Relocate the front mount and bracket.
Disconnect the positive battery cable from starter
Disconnect the solenoid connector from starter.
Remove the lower starter bolt (STARTER LOWER BOLT).
Remove starter from vehicle.

Aug 16, 2011 | 2004 Chrysler Pacifica

1 Answer

How to remove a radiater from a 2000 oldsmobile silouette?


Hello,
  • Remove air cleaner and duct assembly.
  • Drain coolant into a suitable container.
  • Loosen engine mount strut to engine mount strut bracket bolts.
  • Loosen engine mount strut bracket brace bolts from upper radiator support bracket.
  • Remove mounting bolts on radiator upper support and position engine mount strut and bracket to rear.
  • Ensure ignition switch is in Off position, then disconnect cooling fan.
Thanks

May 20, 2011 | 2000 Oldsmobile Silhouette

1 Answer

About how long will it take to replace the radiator?


About 2.5 hours

Hope this helps, it it does please leave feedback and vote Thank You and Good Luck

  • Tools Required
  • J 38185 Hose Clamp Pliers
Removal Procedure

110563917

Caution: Before servicing any electrical component, the ignition key must be in the OFF or LOCK position and all electrical loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its components.


  1. Remove the battery.
  2. Remove the air cleaner assembly.
  3. Drain the cooling system.
  4. Remove the right and the left engine mount struts. Refer to the following procedures:
    • Engine Mount Strut Replacement - Right
    • Engine Mount Strut Replacement - Left
    • Engine Mount Strut Replacement - Right
    • Engine Mount Strut Replacement - Left
  1. Use J 38185 to remove the inlet hose clamp from the radiator.
  2. Remove the inlet hose from the radiator.
  3. Remove the transmission oil cooler lines from the retainer clip at the bottom of the cooling fan shroud.
110563918


  1. Remove the bolt that connects the fan shroud to the condenser hold down bracket.
110563919


  1. Remove the cooling fan shroud bolts.
  2. Remove the coolant reservoir hose from the radiator overflow neck.
110563920


  1. Remove the radiator upper support brackets and bolts that connect to the fan shroud.
  2. Disconnect the engine cooling fan motors electrical connector.
  3. Remove the cooling fan motors electrical harness from the fan shroud clips.
  4. Remove the cooling fan shroud.
  5. Remove the bolt from the condenser tube support bracket to the radiator.
  6. Use J 38185to remove the outlet hose clamp from the radiator.
  7. Remove the outlet hose from the radiator.
  8. Disconnect the transaxle oil cooler pipes from the radiator.
  9. Tilt the top of the radiator rearward.
110564721


  1. Remove the condenser hold down bracket (1) from the radiator.
  2. Remove the air deflectors from the top of the radiator.
  3. Lift the condenser from the mounting tabs on the radiator (2). Position the condenser aside.
  4. Remove the radiator.

Jan 02, 2011 | 2004 Chevrolet Impala

1 Answer

How to change Radiator in 1999 Chevrolet Monte Carlo Radiator


Hello, here are the instructions for rad replacement

  • Remove air cleaner assembly and the throttle body air inlet duct. .
  • Drain the coolant.
  • ).
  • Remove the engine strut brace bolts from the upper tie bar and rotate the struts and braces rearward. Refer to one of the following:
  • • Engine Mount Strut Bracket Replacement in Engine Mechanical - 3.1L • Engine Mount Strut Bracket Replacement in Engine Mechanical - 3.8L
  • Remove the electric cooling fans.
  • Remove the radiator bracket bolts and the radiator brackets.
  • Use the J 38185 in order to reposition the hose clamp at the radiator inlet hose.
  • Disconnect the radiator inlet hose from the radiator.
  • Use the J 38185 in order to reposition the hose clamp at the radiator outlet hose.
  • Disconnect the radiator out let hose from the radiator.
  • Remove the coolant level module.
  • Disconnect the transaxle oil cooler pipes from the radiator. Refer to one of the following:
  • • Automatic Transmission Oil Cooler Pipes Replacement in Automatic Transaxle - 4T60-E • Automatic Transmission Oil Cooler Pipes Replacement in Automatic Transaxle - 4T65-E.
  • Remove the transaxle oil cooler pipes from the retainer at the bottom of the radiator.



  • Remove the radiator.
  • 9e65ca5.gif

    Jun 12, 2010 | 1999 Chevrolet Monte Carlo

    2 Answers

    How do I replace a radiator on a 2002 maxima


    Nissan Car 350Z & Maxima 1999-06 Radiator - Removal & Installation

    1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
    2. Drain the cooling system.
    3. Remove or disconnect the following:
      Negative battery cable Coolant reservoir tank and bracket Upper mounting bracket Upper radiator hose Oil cooler lines, if equipped Lower radiator hose Cooling fan and condenser fan Fan motors and shields Radiator

    To install:
    1. Install or connect the following:
      Radiator Fan motors and shields Cooling and condenser fans and torque the bolts to 44 inch lbs. (5 Nm) Lower radiator hose Oil cooler lines, if equipped Upper radiator hose Upper mounting bracket Coolant reservoir tank and bracket and torque the bolt to 44 inch lbs. (5 Nm) Negative battery cable
    2. Fill the cooling system to the proper level.
    3. Start the vehicle, check for leaks and repair if necessary.
    WARNING Do not remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter of a turn to release built-up pressure. Carefully remove radiator cap by turning it all the way.
    1. Before servicing the vehicle, refer to the Precautions section.
    2. Drain the cooling system.
    3. Remove or disconnect the following:
      Negative battery cable Coolant reservoir tank and bracket Upper mounting bracket Upper radiator hose Oil cooler lines, if equipped Lower radiator hose Cooling fan and condenser fan Fan motors and shields Radiator
    To install:
    1. Install or connect the following:
      Radiator Fan motors and shields Cooling and condenser fans and torque the bolts to 44 inch lbs. (5 Nm) Lower radiator hose Oil cooler lines, if equipped Upper radiator hose Upper mounting bracket Coolant reservoir tank and bracket and torque the bolt to 44 inch lbs. (5 Nm) Negative battery cable

    2. Fill the cooling system to the proper level.
    3. Start the vehicle, check for leaks and repair if necessary.
    WARNING Do not remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter of a turn to release built-up pressure. Carefully remove radiator cap by turning it all the way.
    240ef5f.jpg

    Fig. Exploded view of radiator and components
    1. Before servicing the vehicle, refer to the Precautions section.
    2. Drain the cooling system.
    3. Remove or disconnect the following:
      CAUTION Do not damage or scratch the A/C condenser and radiator core while removing.
      CAUTION Because A/C condenser is onto the front-lower portion of radiator, moving to rear direction should be at minimum.
      Negative battery cable Engine cover Air duct and air cleaner case assembly Bracket mounting bolt for anchoring A/C piping Reservoir tank and bracket Upper and lower radiator hoses Radiator cooling fan assembly On A/T models, A/T fluid cooler hoses. Plug hoses to avoid leakage Cover, then two A/C condensing mounting bolts located in the upper part of the radiator Rotate two radiator upper mount brackets 90 degrees in the direction shown in the illustration and remove fce8147.jpg

      Fig. Removing A/C condensing mounting bolts

      d3c8f50.jpg

      Fig. Rotating radiator upper mount brackets 90 degrees

      edb9f67.jpg

      Fig. Removing radiator
    4. Remove the radiator by performing the following:
      CAUTION Lifting A/C condenser should be minimum to prevent a load to A/C piping.
      With lifting and pulling radiator in a rear direction, disassemble lower mount from radiator core support center. Lift A/C condenser up and remove radiator after disengaging the fitting as front-bottom surface After removing radiator, put A/C condenser on radiator core support center to prevent a load to A/C piping, and temporarily fix it with rope or similar means

    To install:
    1. To install, reverse removal procedure.
    2. Check radiator cap for any leaks.
    3. Start and warm up engine. Check for engine coolant leaks and A/T fluid leaks.

    Hope this help (remember comment and rated this).

    May 12, 2010 | 2002 Nissan Maxima

    2 Answers

    How to remove a radiator from a ford taurus


    Disconnect battery ground cable. Remove battery. Remove battery tray. Remove clip retaining contant control relay module and position module aside. Remove radiator cap. Raise vehicle front end as high as possible. Remove radiator splash shield. Drain radiator. Remove the radiator mounting bracket assembly. Remove lower radiator hose. Partially lower vehicle. Remove upper radiator hose. Remove radiator overflow hose. Remove upper A/C condenser core retaining bolts. Remove upper transmission oil cooler tube clips. Remove lower transmission oil cooler tube. Raise vehicle. Remove lower transmission oil cooler tube clips. Remove lower transmission oil cooler tube. Remove transmission oil cooler bracket and position transmission oil cooler aside. Remove lower A/C condenser core bolts and position A/C condenser core aside(be careful not to loosen the AC condenser lines. Remove radiator support bracket. Remove radiator out through the bottom of the vehicle.
    Installation
    Position radiator. Position radiator support bracket and tighten nuts. Position A/C condenser core and tighten lower A/C condenser core bolts. Position transmission oil cooler tube and install transmission oil cooler tube bracket. Install lower transmission oil cooler tube. Install lower transmission oil cooler tube clips. Install lower radiator hose. Install radiator mounting bracket assembly. Tighten bolts. Install radiator splash shield. Lower vehicle. Install upper tranmission oil cooler tube. Install upper transmission oil cooler tube clips. Install upper A/C condenser core retaining bolts. Tighten bolts. Install radiator overflow hose and tighten clamps securely. Install upper radiator hose. Position constant control relay module and clip securely. Install battery tray. Install battery. Connect battery ground cable. Fill and bleed cooling system. Start engine and inspect for leaks.

    Nov 25, 2009 | 1998 Ford Taurus

    1 Answer

    How to replace radiator in a 2002 jeep grand cherokee v8


    WARINING
    Do not remove the cylinder block drain plugs or loosen the radiator drain **** with the system hot and under pressure. Serious burns from coolant can occur.

    WARNING When removing the radiator or A/C condenser for any reason, note the location of all radiator- to-body and radiator-to-A/C condenser rubber air seals. These are used at the top, bottom and sides of the radiator and A/C condenser. To prevent overheating, these seals must be installed to their original positions.

    Removal & Installation:
    1. Disconnect battery negative cable.
    2. Remove radiator pressure cap.
    3. For access to radiator draincock, remove radiator grill mounting screws and remove grill.
    4. Attach one end of a 24 inch long x 1 / 4 inch ID hose to the radiator petcock Put the other end into a clean container. Open petcock and drain radiator.
    5. Detach power steering fluid reservoir from fan shroud and lay aside.
    6. Disconnect electric cooling fan electrical connector, if equipped
    7. Disconnect CRS hose from radiator filler neck and remove from shroud retaining loops.
    8. Remove the four (4) viscous fan/drive assembly nuts from the water pump pulley and remove fan/drive assy.
    9. Remove the four (4) fan shroud to core support mounting screws.
    10. Remove the electric fan (if equipped) and shroud assembly from the vehicle
    11. Remove radiator upper crossmember.
    12. If equipped with air conditioning, separate radiator from condenser by removing condenser-to-radiator mounting brackets.
    13. Disconnect upper and lower radiator hoses.
    14. If equipped, disconnect and plug automatic transmission fluid cooler lines. Quick Connect Fitting Release Tool 6935 may be needed. If equipped with remote transmission cooler, remove line to cooler from bracket at bottom of radiator
    15. Lift radiator straight up and out of engine compartment taking care not to damage fins.
    16. If radiator is to be replaced, be sure to remove and transfer any components not included with replacement radiator.
    7479d7e.gif

    To install:
    1. The radiator is supplied with two alignment dowels. They are located on the bottom tank and fit into rubber grommets in the radiator lower crossmember.
    2. Lower radiator into engine compartment. Position alignment dowels into rubber grommets in radiator lower crossmember.
    3. If equipped with air conditioning, attach condenser to radiator with mounting brackets
    4. Install radiator upper crossmember and four mounting bolts.
    5. Install radiator upper crossmember-to-isolator nuts. Tighten nuts to 86 inch lbs. (10 Nm) torque. If isolator-to-radiator nuts had been removed, tighten them to 47 inch lbs. (5 Nm).
    6. Connect radiator upper and lower hoses.
    7. If equipped, connect automatic transmission fluid cooler lines. If equipped with remote cooler, attach cooler line to bracket at bottom of radiator.
    8. Install electric fan (if equipped) and shroud assembly. Insert alignment tabs at bottom of fan shroud into slots in bracket at bottom of radiator. Tighten mounting bolts to 31 inch lbs. (3 Nm).
    9. Connect electric cooling fan electrical connector.
    10. Install power steering reservoir to fan shroud.
    11. Install grill.
    12. Connect battery negative cable.
    13. Fill cooling system with correct coolant.
    14. Install pressure cap.
    15. Check and adjust automatic transmission fluid level (if equipped)
    16. Start engine and visually check for leaks.

    For more details I suggest review the Service Repair Manual:
    - Section-07-Cooling-System-Ewj7 (page 33 and next)
    - Section-07a-Cooling-System-Ewj7a

    I really hope helped with this (remember rated and comment this help) Good luck.

    Nov 13, 2009 | 2002 Jeep Grand Cherokee

    Not finding what you are looking for?
    2001 Oldsmobile Alero Logo

    Related Topics:

    32 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8582 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...