Question about 2002 Toyota Avalon

1 Answer

I have a 2002 Toyota Avalon. I am trying to replace the inside door handle on the driver's side. I have the part and have already removed to interior panel. There's a rod the runs into the part I am trying to replace and one of the two cables (one with a white plastic clip and one with a green plastic clip) is broken. I do not know where to go from here to finish the job of replacing this part, because i dont have access to the bottom of where the cables connect. Help me please!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 68 Answers

The plactics pieces are to hold the rods in place. take a screwdriver and you pry the end off and spin it and the rod should pop right off

Posted on Mar 13, 2011

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MauiRentaCar
  • 288 Answers

SOURCE: 1991 corolla door rod handle plastic clip broken

You can get inside door handle either new or used from sellers on ebay. It should be just a few dollars plus shipping. Just search ebay for "Inside door handle 1991 Toyota Corolla."

Frank
Frank's Friendly Cars Maui Car Rental
www.MauiCarRental.biz

Posted on Aug 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't the inside Driver Door Handle work after being replaced


Make sure if it is equipped with a child safety lock on the inside of door jamb below or above the latch is unlocked. If that is ok then check to be sure the cable or rod to the interior handle is properly connected to the latch, remove door panel and if you can't see it directly you may have to use a mirror and flashlight to see if all is connected if so work the interior door handle while looking at all moving parts and tracking down where it is not doing it's function.

Aug 24, 2014 | 1998 Toyota Camry

1 Answer

How do I remove and replace the right interior door handle on my 2002 Toyota Corolla?


specting you have your new door handle on hand, star by removing philips screw, look at your new door hanle and it has tabs or hooks(some are forward others to the back) well now you know to what direction pull/push the handle to unhook, pull a litle on it until you see a steel rod hooked to handle, take a neddle nose chanel locks and cramped, use a small screw driver to remove clip holding rod, now intall new handle back tracking.
good luck

Mar 14, 2011 | 2002 Toyota Corolla

1 Answer

The driver's side door could not be opened inside with interior handle. I have a 2002 volvo v70. Everthing seems ok before I pressed the central locking buttom at driver door armrest. Now the driver door...


you"ll have to remove the door trim and replace or reposition the cable/rod assembly that has move out of position not too hard to fix dont worry

Jun 05, 2010 | 2001 Volvo S60

1 Answer

Outside handle on 1997 Toyota Avalon will not open door


Since you can get the door open, half the battle is already won. Yes, open the door, pull the interior door panel and take a look around. Watch inside with a flashlight (towards the rear of the door) as you roll the window down to see if you can see what it's snagged on.

Jun 03, 2010 | 1997 Toyota Avalon

1 Answer

Driver's side window switch doesn't work.The switch that lowers and raises the driver's side window in my 1998 Toyota Avalon has stopped working. Until last week, it worked sporadically. I think the switch...


i know on some toyotas, you do not need to remove the door panel just the handle where the switch assembly is located...if the panel around the switches is plastic then pry GENTLY up on the plastic to dislodge it from the door handle and inspect connections there...if everything checks out fine, then check fuses...perhaps this was a problem for so long that the window motor finally blew a fuse. if so replace both fuse and motor...if fuses okay, then with a long screw driver locate any screws under the door handle, bottom of the door panel, mirror panel etc, and remove...then gently pry outwards on door panel until it is released. disconnect your harness at the window motor and hook in a test light and operate the switch..if light illuminates, replace motor..if not, then replace switch or switch panel..which ever/.

Nov 13, 2009 | 1998 Toyota Avalon

1 Answer

Back door will not open from the inside


The linkage has most likely come loose from the back side of the inside handle or the handle where the linkage attaches has broken. You must pull out the interior door handle to know for sure. Might be as simple as putting the metal rod (linkage) back into the handle and securing it.

Oct 12, 2009 | 1997 Toyota Avalon

1 Answer

How do i replace interior door handle for my toyota corolla 2001 on the driver side


you must remove the door trim panel. the inside handle is bolted to the door with a lock and latch cable attached to it. screw at door hanle cover and another under window and lock master switch, then push clips holding around edge of panel. you will also need to remove small cover for inside of mirror

Oct 03, 2009 | 2001 Toyota Corolla

1 Answer

Avalon door panel


Below are the removal procedures for your vehicle's front inner door panel.


On models without power windows, remove the snap ring retaining window crank handle. Remove crank handle and cover plate.
Remove lower door frame bracket garnish. Using a screwdriver, remove inside door handle bezel. Remove power mirror control switch and disconnect harness connector.
Remove armrest panel. Remove 6 screws. Pry interior door panel loose from door.

May 23, 2009 | 2001 Toyota Avalon

1 Answer

Removing interior door panal w/o breaking it


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 16, 2009 | 2002 Toyota RAV4

Not finding what you are looking for?
2002 Toyota Avalon Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...