Question about 1995 Dodge Caravan

2 Answers

Crank positioning censor

Where is the crank positioning censor located at

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The camshaft position sensor is located on the timing cover on the front of the engine. The crankshaft position sensor is located just above the differential on the transaxle bell housing where it has to be to read from the flywheel the position of the crankshaft. It is easy to see from the front of the engine even though it is on the back half. Just look for the shifter cable and where its bracket ends (on the firewall side of the bracket) glance about 12" to the left and you should have no problem finding it. An 8 mm bolt is holding it in and with that bolt taken out it just pulls out of its hole. Google "95 caravan crankshaft position sensor" and then pick IMAGES so you can see an actual picture of what it looks like.

Posted on Oct 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 64,034 Answers

Here is a photo of the sensor, it is in the timing cover on the front of engine.crank positioning censor - std_crank_shaft_sensor.jpg

Posted on Aug 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the crank position censor on the Peugeot boxer 2.8hdi 2001 situated


I could not find the exact location, but by looking at the sensor I would say it is at the front of the engine.

May 10, 2016 | Peugeot Cars & Trucks

1 Answer

Where is the crank position censor located


If you mean to do your timing, depending on the engine type. It should be on the flywheel on the front of the crank.

May 10, 2016 | Cars & Trucks

1 Answer

Need to know where the crank censor is on a 02 Hyundai santa fe


THE CRANK SENSOR IS LOCATED ON THE ENGINE BLOCK NEAR TRANSMISION BUT CALL YOUR DEALER THIS TRUCK HAVE A RECALL FOR THE SENSOR

Oct 05, 2014 | 2002 Hyundai Santa Fe

1 Answer

Will a broken timing chain set a bad crank censor code


Yes it will.Before you do anything you need to check your fuel pressure to make sure its within the specs.Your fuel pump could be faulty.

Jan 14, 2012 | Chevrolet Cars & Trucks

1 Answer

Where is the crank censor located


crankshaft position sensor is located on the transmission bell housing on the left side/ driver side of the engine. It reads off the flywheel. You probably have to feel for it because they are hard to see from the top side.

Oct 01, 2010 | Mercedes-Benz E320 Cars & Trucks

2 Answers

CAN NOT LOCATE THE CRANKSHAFT POSITION CENSOR ON MY 1996 INTREPID


It should be on the transmission by the passenger side of car. It has three wires connected to it.
1998 Dodge Intrepid
the crank sensor is on the passenger side of the car on the back of the engine. Check right up there by the transmission housing.
1994 Dodge Intrepid 3.3 liter

Jan 01, 2010 | 1996 Dodge Intrepid

2 Answers

Where is crank position sensor on 92 Oldsmobile 3.3 litre and how do I test it


its located right behind the balancer. remove the balancer you will see the shield remove the shield and the sensor is located right behind it secured by a bracket.

Jul 20, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Need to replace external crank position censor - need schematic


Hello tsutor, my name is JShreader. Thank you for choosing fixya.com.

There are 2 on this Engine. I uploaded a .pdf with pictures showing both of their locations. You can download it by clicking HERE. I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!

Mar 30, 2009 | 1998 Chevrolet Lumina

Not finding what you are looking for?
1995 Dodge Caravan Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...