Question about 1998 Pontiac Sunfire

2 Answers

When I leave the lights on in my 2000 Pontiac Sunfire, the car does not alert me with the traditional "ding ding ding" bell. It doesn't alert me at all. This has lead to the lights being left on multiple times and several dead batteries. What could be wrong?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I have a 98 sunfire and there is a relay on the right side of the car up and behind the glove box and there is some relays in there that controll the door and lite chimes.you may have a relay that is bad.it is kind of hard to reach.

Posted on Aug 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 62 Answers

The dinger could be unhooked or broken,if you didnt buy the car new someone problly unhooked it.you can buy an after marker buzzer for 5/10 bucks at some parts stores.it has simple instalation instructions.

Posted on Aug 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the clutch slave cylinder in pontiac sunfire 2003


The slave cylinder is what moves the clutch fork inside the bell housing. It would be mounted just inside or outside of the bell housing at the flywheel.

Jul 26, 2014 | 2003 Pontiac Sunfire

1 Answer

2000 Pontiac Sunfire Stuck in park


check if you have brake lights, if not your brake light fuse or brake switch are bad replace fuse or switch and it should work again if this was helpful please leave good feed back

Feb 27, 2014 | 2002 Pontiac Sunfire

1 Answer

'02 pontiac aztek and the break light on the dash is on and the warning dinging noise wont stop


This light also indicates other brake system problems. You can also have a park brake switch that is stuck on or damaged in some wayy, check that first.

Sep 04, 2012 | 2002 Pontiac Aztek

1 Answer

Where is the fuel pump shut off switch located in a 2000 pontiac sunfire


GM doesn't use a fuel pump shut off switch, the safety system works like this, fuel pump is turned off if the engine oil pressure goes to zero with the key in the run position. Ford uses a shut off switch that is activated by an impact exceeding 3 G's (3X the force of gravity), it is called the fuel pump shut off inertia switch.

Aug 24, 2011 | 2000 Pontiac Sunfire

1 Answer

How to install a serpentine bell on 2000 pontiac sunfire


is the belt still on the car if it is take a peace of paper and do the best you can to draw the diagram of the way the belt goes on then when your sure you got it good you locate the belt tensenor and use a wrench to hold it long enough to remove the old belt do the same with the knew one.

Oct 25, 2010 | 2000 Pontiac Sunfire

1 Answer

Flashing light in gauges


security system . Trun the ignition key on and leave it on for about twenty minutes,(light should stop falshing) then try and start it.

May 20, 2009 | 2000 Pontiac Sunfire

1 Answer

2000 Sunfire check engine light


The computer will have to be scanned for codes, then remove the light with the tool ....you can buy a scanner at Cragens

Dec 22, 2008 | 2000 Pontiac Sunfire

1 Answer

2001 pontiac sunfire wont start


I have had the exact same problem. There is an ignition lock that probably went off. There is a fuse box under the hood. The fuse that says ignition on it pull it out and put it back in. This should reset the ignition lock. Its a safety feature because the car thinks that someone was trying to tamper with it.

Dec 03, 2008 | 2001 Pontiac Sunfire

Not finding what you are looking for?
1998 Pontiac Sunfire Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...