Question about 2002 GMC Yukon XL

1 Answer

2002 GMC Yukon XL brake light replacement - 2002 GMC Yukon XL

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 27 Answers

Hello Weaver124!
Open the tailgate(s) completely and you'll find two phillips-head screws on the inside edge of the tail light assembly. Take out those two screws (keep one hand on the assembly when you remove the last screw) and the whole tail light assembly will come off of the vehicle. On the back side of the tail light assembly, twist and remove the light bulb housing for the blown bulb. The bulbs themselves on some models vary in the manner in which they are removed: (1) If the base on the bottom of the bulb itself is a *round* brass base, press down on the bulb then twist it to remove it, or (2) If the base on the bottom of the bulb itself is *flat* plastic, pull the bulb straight out of the assembly. To replace the bulb, simply reverse the order. Best wishes!

Posted on Mar 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My back brakes keep locking up on my 2002 gmc


Check that the rear axle is not leaking oil on the brakes!
If the brakes are clean and no oil then check the brake check valve near the master cylinder

Sep 17, 2014 | 2002 GMC Yukon

1 Answer

How to remove plastic bracket that holds brake lines for 2002 GMC yukon


The related help,link,to troubleshoot the problem is as follows:--
Click the link below:---
Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

--------
Brake line pressure issue? http://schematicsdiagram.blogspot.in/2012/04/2000-silverado-brake-line-pressure.html

---------
How to fill Brake line antifreeze? http://technoanswers.blogspot.com/2012/01/how-to-fill-brake-line-antifreeze-on.html

----------
This will help.
Thanks.

Jul 17, 2012 | 2002 GMC Yukon XL

1 Answer

I own a 2002 gmc yukon 2 wheel drive and is a florida vehicle and never left the state .. abs lite and brake lite come on constantly on my dash and lites up,, new brakes and new wheel hubs or bearings were...


It's so much easier to hook up a scanner to read the ABS codes than trying to guess, the brake lite comes on when the fluid is low or your e-brake is on, only takes one click to activate the light.

Jul 28, 2011 | 2002 GMC Yukon XL

1 Answer

I just had my 2002 Yukon XL rear barkes replaced. New calipers and pads,the parking brake doesn't work. Shouldn't they have found that when they were doing this work?


Of course they should have checked the parking brakes too. On the Yukon XL, the parking brakes are brake shoes that operate inside of a drum that is molded to the interior side of the rear disc brake rotors. I would take it back to the shop and voice my frustration if I were you and tell them that you feel they should do the parking brakes at no charge for your time and aggravation. They were right there to replace them if they re-surfaced your rotors anyway!

Feb 21, 2011 | 2002 GMC Yukon XL

1 Answer

GMC Yukon - ABS light and parking brake light come on while driving but they will go out if the car is restarted. Could it be a sensor or ECBM?


try to pull up on your parking brake pedal with your hand when light comes on. if this makes it go out u will need to adjust the parking brake switch under the pedal. or replace pedal spring that holds it up.

Oct 02, 2009 | 2002 GMC Yukon XL

1 Answer

How do i open the 3rd brake light fixture on a 2002 yukon


You can't open it to change bulbs.

I tried to cut it open with a dremel tool but once opened the bulbs are soldered in and there is a small electrical circuit board.

I ended up buying a replacement light from an Auto-Value store. It was half the price of the one from GMC

Jul 17, 2009 | 2002 GMC Yukon XL

1 Answer

Third Brake Light Problem


I received your 3rd brake light flash controller-fully adjustable ez fit kit. installed on my 2002 gmc sierra, power coming into box, good ground and unit is not working. third brake light works good with kit removed. any help would be appreciated. thank you for your time.

May 25, 2009 | 2007 GMC Yukon XL Denali

1 Answer

My ebrake is stuck


Grab a small hammer, slide under the back wheels, you will see the wire and springs on the inside of either brake disc. Tap forward on each. Once free'd up, drown it in PB or lock ease. then work the brake up front for a while. It's mostly from brake dust buildup. Next time you have the rear brakes done replace the EB parts. Hope this helps

Apr 12, 2009 | 2002 GMC Yukon XL

1 Answer

2002 yukon no brake lights but third brake light works


ed7882 I had the same exact problem and thought it was a fuse or the wiring. Come to find out it was just a blown bulb. They are inline together with the cruise so if one blows it all goes. So change out the lights and that should fix it for you.

Apr 02, 2009 | 2002 GMC Yukon XL

1 Answer

2002 YUKON XL Denali no brake lights or cruise


FROM LUSTY KID:

Check your bulbs first, I have lost both headlights on my ford at once on account of the bulbs burning out at the same time. Same thing probably happen, you have one filament out. The lights can work, but if the filament for brake is burnt, you don't see brake lights.

As for the cruise control. Check fuse box first. If OK check vacuum hose to actuator in engine compartment for starters.
Advise:

Oct 12, 2008 | 2002 GMC Yukon XL

Not finding what you are looking for?
2002 GMC Yukon XL Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...