Question about 1999 Mercedes-Benz E-Class

Open Question

HI, I HAVE E230 W210 SERIES, MY REMOTE OPENS DOS BUT DOES NOT LOCK IT , THE BUTTON ON DASH BOARD ALSO UNLOCKS BUT DOES NOT LOCK, MY DROP HEAD REST BUTTON DOES NOT DROP HEADREST A BACK. MY BOOT ONLY OPENS WITH KEY , THE BOOT BUTTON AT THE GAR THE LIGHT IS ON AS IF THE BOOT IS OPEN , THE CEILING & DOOR LIGHTS ARE ON PERMANANTLY AS IF DOOR ARE OPEN , WHEN ACTIVATE ON TOP. I CHECKED FUSE AND INSPECTED DOOR SWITCHES ALL FINE - PLEASE ADVISE - MANY THANKS - ZAKS

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: I need free download owners manuals of e230 W210

no heat blowing out of my car

Posted on Feb 16, 2010

Ad
  • 10865 Answers

SOURCE: Have 1996 CL600 Coupe &

Hello. Check the latch itself and the matching piece on the boot lid. If one is loose or slightly out of alignment it will cause the troubles you are describing. Also, check the entire gasket. Joe

Posted on Oct 23, 2010

  • 1 Answer

SOURCE: Hi, My cars central locking

Replace Fuse 27 in main fuse box located under the hood black box in far right corner. Then try reseting your battery. Make sure to follow these steps as follow. Unhook the - then + of the battery. Clean both the negative and postive of the battery. Next go under the hood far right and replace Fuse 27 which is 15 type fuse green in color. Wait 20 minutes for reset of the computer then attach the + and - cables back to the battery.

Posted on Jun 06, 2011

Hobbit_who
  • 2044 Answers

SOURCE: Central locking on w210

Can you please re-ask this questions?

First, you said the button Unlocks the Car and then say it Won't?
Second, The lock/unlock does not control the Courtesy lights, there is a Time delay but now here is the kicker....

Does the Courtesy lights come on when you use the FOB ?

If they do, they you have a problem with the Button or the Button Controller or a wire.

Third, I am not sure what Button you are talking about on the REAR HEAD RESTRAINTS? Are you talking Head Rests? I have never heard of as HEAD RESTRAINT

Posted on Apr 08, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Central locking on w210


Can you please re-ask this questions?

First, you said the button Unlocks the Car and then say it Won't?
Second, The lock/unlock does not control the Courtesy lights, there is a Time delay but now here is the kicker....

Does the Courtesy lights come on when you use the FOB ?

If they do, they you have a problem with the Button or the Button Controller or a wire.

Third, I am not sure what Button you are talking about on the REAR HEAD RESTRAINTS? Are you talking Head Rests? I have never heard of as HEAD RESTRAINT

Apr 08, 2013 | 2000 Mercedes-Benz E-Class

1 Answer

When I press the power door lock button, the only door that will open is the driver's door. The other three doors remain locked


you have to press the unlock button twice, the first push opens the drivers door, the second unlocks the rest of the doors.

Jul 26, 2010 | 1989 Buick Park Avenue

3 Answers

My Porsche Key fob no longer unlocks the doors


Insert key into door barrel or ignition lock and turn key, whilst doing this press the unlock/lock button, the led on the dash should flash to indicate this has initialised the key to the car, then remove key and test operation of remote. If this fails then a new remote plus coding to the car by your dealership is needed

Feb 16, 2010 | 2005 Porsche 911

1 Answer

Key fob only opens drivers door


hit the unlock button twice. most fobs are programmed so you hit it once, drivers unlocks, and again for all the rest.

Jan 25, 2010 | 2004 Volkswagen Passat

1 Answer

BMW Power Locks don't work, how much to repair?


Before you bring it to a garage and pay good money check the fuses. Usually its as simple as that (located near the battery in the engine bay)

Hope this helps.

Apr 28, 2009 | BMW 328 Cars & Trucks

1 Answer

Programing a remote on a 99 quest


first make sure,that the batter is ok. You will need to have both remotes while doing this.
1: get in and lock the doors with the power door lock
2: insert the key into the ignitoin repeatedly IN and OUT 6 times in a row or just keep doing so, until the hazard flashers flash on the dash board (observe the dash board while inserting key)
3: after the hazadrs flash TURN key into the ACC position/not start.(dash will light up) DO NOT START
4: with the key in ACC position, hit lock button on the remote. That will program that remote.
5: to program the other remote simply unlock the door with the door lock switch and relock it with the swithc and hit the other remote button.
6: done

Sep 16, 2008 | 1999 Nissan Quest

1 Answer

Door Locks


Sounds like you have an electric lock actuator going bad. It only takes one and they all act up.The vehicle security module and the switches share the same ground. It is ground #900. Located on the left C pillar. Check to see if the ground is clean and tight. You can disconnect one actuator at a time. If you disconnect the bad one, the rest will function.Did you have any doors making a loud grinding noise when the locks were applied?if yes, start with that one. If no, start with the drivers door.The drivers lock actuator sees more work than the rest since it unlocks by itself on the first push of the remote.If this is something you do not want to do,try the find a repairman option at the bottom of the page. If you need more help,don't hesitate to drop a line.Good Luck

Sep 01, 2008 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Ford galaxy central loking failure problem?


Hi kifixya!

The doors lock automatically at road speed and must be unlocked with the unlock switch before they will open (with the exception of the driver's door). This is how they were designed to work.

To unlock all doors with the remote keyless entry, hit the button twice (like double-clicking a mouse); the first unlocks the driver's door; the second push unlocks the remaining doors.

Hope this answers your request, andgood luck!

-WildBill

Jun 16, 2008 | Ford V6 Pony Cars & Trucks

Not finding what you are looking for?
1999 Mercedes-Benz E-Class Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...