Question about 2004 Hyundai Tiburon

Open Question

I have a 2004 tiburon and i need to remove the antenna mount and idk how. i cross threaded the interior now i need to take it out and put a new one in but idk how to get the mount out. i took it down to where i can see the inside and the outside of the mount but idk how to remove it full from the vehicle. if u no a way to remove it i would greatly appreciate it

Posted by on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1348 Answers

SOURCE: removal of inside rear view mirror

glass shops do it all the a windshield repair place and ask how they do it...either heat or a chemical that dissolves the adhesive,which is a special glue.

Posted on May 14, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tiburon no detecte antenne

DIY: Power Antenna - New Tiburon Forum : Hyundai Tiburon Forums ...
Jul 12, 2010 - 16 posts - ‎9 authors
My memory is not the best, so any details that I have forgotten... well, they're gone. ...See how I am lifting it up on side to get to the third bolt? stock with no antenna?
8 posts
Jun 11, 2013
2007 Tib Antenna Problem
8 posts
Mar 4, 2012
antenna mount removal?
5 posts
Mar 13, 2011
How do you remove the factory antenna?
25 posts
Oct 30, 2004
More results from

Nov 18, 2015 | Cars & Trucks

1 Answer

How to remove rear transmission mount

place a jack under the transmission and after undoing the bolts/nuts from the mount ( extension housing and cross member ) lift the transmission enough to remove the mount. If that is not possible then remove the cross member and then remove the mount.

Apr 22, 2014 | 2004 Kia Sedona

1 Answer

I have a Volvo XC 90 2004 and the upper engine mount needs to be replaced as it is broken please help. Thanks Bob

Remove the two bolts that hold the cross bar on each strut tower. 4 in total. Remove the bolt that goes through the mount you will need to hold the nut or bolt while turning the other. Put the cross bar aside and unbolt the mount. Remove and replace and reinstall the cross bar.

Apr 17, 2014 | Volvo XC90 Cars & Trucks

2 Answers

Oil filter mount is stripped

hi John, here in New Zealand we can buy repair threads for this type
of problem. You should find them in your local auto parts store.
Failing that a good engineer should be able to run one up on a
lathe in no time at all.
happy new year

Jan 03, 2013 | 1994 Chevrolet S-10 Blazer

1 Answer

Hard shifting when put in gear

Hi Phyz Guy, Your problem could be engine mounts or spyder joint wear. As the vehicle is front wheel drive also check the cross member mounting. Regards John

Jun 30, 2012 | 2003 Hyundai Tiburon

1 Answer

The radio on my 2004 Tiburon gets only static on every station, however the CD player works perfectly fine. Solutions?

if it has a built into the window antenna, install a real one on the fender. if it has an antenna which retracts and extends automatically, replace it with a real one. if it has a good antenna, make sure it is actually plugged into the back of the radio.

Sep 22, 2010 | 2004 Hyundai Tiburon

1 Answer

Need to know how to fix a cross threaded spark plug on 2001 chevrolet s-10

you'll have to remove the head, and use a threaded insert kit for spark plugs to cut new threads, and put a threaded insert in for the new threads. These aren't extremely expensive, but you still need to remove the head so you don't get aluminum shavings in the cylinder.

Mar 23, 2010 | 2001 Chevrolet S-10

1 Answer

How do you put the ariel down on a 2004 Ford Mustang

The antenna on this vechicle is a fixed mount and does not retract. You can remove the antenna by unscrewing it at it's base. They make aftermarket antennas that are shorter, but you give up reception.

Nov 07, 2009 | 2004 Ford Mustang

1 Answer

Is there an easy fix to screw in antenna snapped of in mount

You can drill out the snapped-off screw and re-tap the hole. Then just put in a new (and slightly larger) screw. You will probably need a larger screw if you drill it out past the existing threaded hole. If you're lucky, you can sometimes just push a screwdriver against the edge of the screw and rotate the screw out that way until you can grip it with pliers and unscrew it. Then just put in a new screw.

Feb 12, 2009 | 2007 Honda CR-V

1 Answer

Changing the headlights

This picture shows the rear side of the headlamp assembly. I've circled the access caps to the high & low beam bulbs (they just twist off (counter-clockwise) to access the bulbs. Depending on which engine is in your Tiburon, access is easier if you remove three 10mm mounting bolts to the headlamp assemblies and remove the entire headlamp assemblies (see illustration)
c173c7f.jpg You'll want to disconnect these two connectors .. then remember to reconnect them when you put the assemblies back on.

Hope this helps

Dec 20, 2008 | 2004 Hyundai Tiburon

Not finding what you are looking for?
2004 Hyundai Tiburon Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides