Question about Chevrolet Malibu

2 Answers

Turning signal and hazards don't work - Malibu Chevrolet Cars & Trucks

Posted by on

  • 2 more comments 
  • Super_Rob Sep 25, 2008

    I've replaced bulb does not help.

  • Mike McGuire Sep 27, 2008

    turn signals and hazzards work correctly but the hazzard/ blinker module clicks when the car runs. It clicks at a faster rate then when the blinker or hazzard lights are used. A new module didn't fix the problem.

  • Mike McGuire Sep 27, 2008

    turn signals and hazzard lights work normally but the hazzard/turn signal module clicks constantly when the car is running and it clicks at a faster rate then when either the turn signal or hazzard is selected. Replacing the module didn't fix the problem.

  • leelancarnes Oct 12, 2008

    mine dont work at all now. They would work at times and now I have nothing. GRRR



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that gotĀ 5 achievements.


    An expert who has achieved Level 3.


    An expert that hasĀ over 500 points.

  • Master
  • 398 Answers

Check for blown fuse, if the fuse is good, the turn signal switch in steering column control both of these functions.

Posted on Aug 01, 2008


I have the same problem.. I found that this was a common problem and the car was recalled for the 2000-2001 model yrs.. the hazard-turn signal module is above the AC controls.. the dash panel has to be taken off and the unit replaced or if the plug is corroded it might be able to be cleaned and plugged back in..the dealer I took my car to just replaced 2 bulbs ..that wasn't the problem.. I'll have to bring it back and tell em what they should already know....hope this helpedu can go to the NHTSA to read about it:

Posted on Sep 26, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My turn signals quit working on my 98 explorer after working on the gas tank. Is there anything by the gas tank that would affect the turn signals?

there is a hazard flasher and a turn signal flasher. if the hazards work turn them on and find the flasher making the noise this will show what it looks like as the turn signal looks the same. the signal should be around the same area somewhere as the manufacture does not put them in a set location. if the hazards do work then the wiring is good and working on the gas tank had no affect with your problem. if they don`t work then you may have damaged the wiring in that area and will have to take a look.

Sep 24, 2014 | Cars & Trucks

1 Answer

2000 tacoma flashers don't work but turn sig do work!

The hazard switch gets power from the horn fuse which is hot all the time, and from the turn signal fuse which is hot when the key switch is on. The turn signal switch gets power from the hazard switch and both use the same flasher.
So if the turn signals work but the hazard switch does not power the lights, and both fuses have power, I would say the problem is inside the hazard switch.

Feb 19, 2013 | Cars & Trucks

1 Answer

Hazard warning light don't work

Its possibe that ypou have independient FLASHER device, one for hazard and one for turn signal; check backside of fuse panel and replace it.

Aug 28, 2012 | 1993 Plymouth Voyager

1 Answer

Turn signal lights don't work even though hazards do

Sound like a flasher device go to bad; check in fuse box and replace it to solve this problem.

Jun 11, 2012 | 2006 Chrysler Town & Country

1 Answer

My hazard lights don't flash but turning signals work

in new cars, especially premium ones have digital circuits for signals and flashers. they are seperate on BMW for instance. if only flasher is problematic reason can be the switch itself.

Nov 19, 2011 | Cars & Trucks

1 Answer

My turn signals don't work but my hazards are fine

try pushing, pulling, tugging on hazard switch button when turn signal is on, left or right, if they start blinking, the turn signal switch is bad.

Sep 14, 2011 | 1998 Ford Explorer

1 Answer

No turn signals they come on but don't flash

It's probably the turn signal flasher. It is usually located under the dash along with the hazard light flasher. If you don't know what it looks like, then go to a parts store and look at a new one. Once you have located one, then remove it. Try the hazard flashers. If they work, then replace that flasher with a new one. If they don't, then reinstall that flasher and look for another one like it. When you find one, replace it with the new flasher and try the turn signals. (remember : the key must be on for the turn signals to operate). I hope this information helps you and thank you for using

Jun 28, 2011 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

How to fix turn signal on 86 Chevy Astro Van

you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

708 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides