Question about 1993 Buick Roadmaster

1 Answer

I have a 1993 buick road master it runs great when its going.when i put it in reverse or turn the wheel to hard or come to a complete stop it cuts of but starts right back up can anybody help???

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,066 Answers

The alternator is weak. get a voltometer and test the positive and negative leads at the battery. they should test above 14 volts at idle, if they test lower than 14 volts, you need a new alternator.

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Buick Rainier four wheel is stuck in AWD drive all the time .


All wheel drive is just that-- All wheel drive-- not to be confused with 4 wheel drive . The difference is with AWD there is a 3rd diff in the transmission that allows the front and rear wheels to operate at different road speeds . When 4wd is selected that 3rd diff is locked and so both front and rear wheels drive at the same speed regardless of ups and downs in the road surface . This results in a torque wind up in the drive train and places load on "U" joints --splines --CV joints and gear teeth . The grinding on turning corners will be the CV joints trying not to flex because of the torque wind up . How to prevent this problem=== Do not use 4wd on hard road surfaces === as the tyres cannot slip to relieve the torque Restrict the 4wd use to snow , mud and loose surfaces TO fix the problem unselect 4wd drive and reverse several yards to release the pressure in the drive train and the actuator has a chance to pull the gear out of lock up. If that doesn't work check that the actuator is actually working

Mar 08, 2014 | 2006 Buick Rainier CXL

1 Answer

Cuts off when making a turn


my 93 did the same thing this does work go get some heet for the fuel and then go to the gas station put the heet in and put 93 octaine in with it only one bottle fill it with 93 after you do that go to a empty road and open it up and that will solve your problem

Dec 10, 2012 | 1993 Buick Park Avenue

1 Answer

1993 buick lesabre changed the front rotars and pads and now the cars brake pedal is so hard to push down to get car to stop. Mechanic has checked both the front and back brakes and they are fine. T


I would jack up a front wheel and see if pushing on the pedal with the engine running will stop the wheel from turning.
You need to know if the pressure is reaching the wheels, or if the pads and rotors are too slick to stop the car.
Usually if the pedal is hard, the booster is not working or the brakes are glazed.
Can you stop the car with the parking brake ? That only uses the rear brakes.
You may need a second opinion from a different shop.

Jul 19, 2012 | Buick LeSabre Cars & Trucks

1 Answer

2001 Chrysler Town and Country has 149,000 miles. Had rear brakes put on and rotors turned, now going down road you might get a ****/hesitation and then when you put on brakes to stop it does a lot of...


Hard to say without a visual inspection. Have them rechecked by the shop that did the install. You may need new rotors. The rotors may have been cut beyond discard allowance,

May 28, 2010 | 2001 Chrysler Town & Country

1 Answer

Powersteering making squeeling sound we have put


YOU MIGHT HAVE ONE OF THE LINES ON WRONG. REVERSE THEM

Nov 12, 2009 | Ford Taurus Cars & Trucks

1 Answer

1993 buick riviera hard to start and won't stay running


Check your gas filter, chances are it's clogged and needs to be replaced.

Apr 18, 2009 | 1993 Buick Riviera

Not finding what you are looking for?
1993 Buick Roadmaster Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...