Question about 2007 Saturn ION-2 Quad Coupe

Open Question

Installing the throttle body for a 2007 Saturn ion engine is stalling when stopping

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 19 Answers

SOURCE: location of body control module on 2007 saturn ion

Bcm and fuse box are one piece, located in front of center console, just under the heater controls.  Remove side panels from console on both sides.

Posted on Aug 23, 2009

  • 39 Answers

SOURCE: the check engine light is

TAKE YOUR TRUCK TO AUTOZONE ASK THEM TO PUT THE MACHINE ON IT. THEY WILL TELL YOU WHAT CODES COME UP.GO FROM THERE.

Posted on Aug 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Saturn ion wont idle down


Your vehicle has drive by wire or electronic throttle control ! It has a 12 volt electric motor that opens an closes the throttle plate ! You need to have it check for DTC'S diagnostic trouble codes ! an checked for binding throttle plate !

May 26, 2015 | 2007 Saturn Ion

1 Answer

2004 Saturn Ion with M75 automatic transmission


I believe this is almost the same engine and transmission as my 2002 Saturn LW200. We had problems with lurching, jerky shifting and occasional stalling. I was worried that the transmission was going out. Got a transmission service for $150 which they need after 125k miles anyway. Turned out to be the throttle position sensor (TPS). I was able to fix it by cleaning the TPS with WD-40 but your engine has drive-by-wire if I'm not mistaken which makes it more complicated. What this means is that your gas pedal is not directly connected to the throttle body with a cable. it works something similar to a volume knob and tells the computer how much to open the throttle body butterfly. A drive-by-wire throttle system is best left to someone with skills in that area. A shop should be able to read the codes and determine if your drive-by-wire system is working well. That will be much less expensive that a transmission rebuild.

Oct 20, 2014 | 2004 Saturn ION

1 Answer

2005 Saturn Ion 2.2 idles low and stalls. No check Engine light or performance issues.. what could it be?


Adjust your idle on the throttle body! Should be a set of two nuts on throttle cables

Jun 03, 2012 | 2005 Saturn Ion 2

1 Answer

My 2004 saturn ion throttle sticks at between 1100 and 1500 rpms when i stop at redlights, etc. if i turn the key off and immediately back on, the idle returns to normal, (750-800 rpms), but may stick...


Actually, you will have to have the throttle body bore cleaned physically. There will be carbon build up preventing the TB plate from closing completely. Lucas gas additive used twice a year will prevent this from reoccurring. Mercury Marine gas additive is GREAT as well!

Jul 17, 2017 | Saturn Ion Cars & Trucks

1 Answer

The check engine light is on in my 2007 saturn ion. the mechanic wants to replace the throttle body


TAKE YOUR TRUCK TO AUTOZONE ASK THEM TO PUT THE MACHINE ON IT. THEY WILL TELL YOU WHAT CODES COME UP.GO FROM THERE.

Aug 11, 2011 | Saturn Ion Cars & Trucks

3 Answers

Car cuts off when coming to a stop.


IF THE ENGINE CUTS WHEN YOU BRAKE ALSO LOOK FOR AN AIR LEAK IN THE HOSE FROM THE INLET MANIFOLD TO THE SERVO (cheaper than a throttle body)

Jul 14, 2010 | 2006 Saturn ION

3 Answers

Why does my 2005 saturn stall when i am driving


The air filter, fuel filter and oxygen sensor are definitely things to look at but the 2005 ION doesn't have a distributor it has an ignition module. Not the cheapest part. I own a 2005 ION and had a similar problem. It was idling at a low RPM and would stall when I had the clutch in long enough to let the engine idle. I simply cleaned the throttle body and the problem was solved. The throttle body gets a nasty build up on it and needs to be cleaned regularly. It's fine when the throttle is open but as soon as you allow the throttle to close to the idle position the engine is choked because of the build-up. My wife's car is an '06 Ion automatic and it was doing the same thing when she had the brake on at a light or a stop sign. Same solution worked just fine.

Also her car had a problem with stalling when she went over bumps and around corners. These cars have really bad ignition switches and key tumblers and it turns out after we had a dealer look at it that the weight of her key ring (it had way too many things on it) slowly caused the ignition to wear out and it would shut off the power when it jiggled the wrong way.

Not sure if these describe your solution but I hope that it helps.

Jun 14, 2010 | 2005 Saturn ION

Not finding what you are looking for?
2007 Saturn ION-2 Quad Coupe Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...