have another key made at walmart,your key is problbly worn out.by having new key made with your worn out key,new key will have better notches to activate tumblers in ignition cyl.also try simply turning steering whrrel hard right &left.steering wheel lock may be keeping cyl frm turning.
i have recently purchased a used 1998 LeSabre, with approx. 75000 miles on it. The security light...
(More)
i have recently purchased a used 1998 LeSabre, with approx. 75000 miles on it. The security light has come on and I am not sure what this is indicating, or what problems could arise. When I bought this car it did not have an owners manual with it! Also, when I reach speeds of about 60m.p.h. and higher there seems to be a vibration or shimmy. The front end has been checked and everything is o.k..
I have a 2002 chrysler 300m with a 3.5 high output engine. I replace the engine frome a 200 chrysler...
(More)
I have a 2002 chrysler 300m with a 3.5 high output engine. I replace the engine frome a 200 chrysler 300m 3.5 high out put. Now its hard to start and I get p0016 and p0344 codes all the time
A few days ago, I turned my car, a 1995 Ford Taurus, on and everything was working fine and then it...
(More)
A few days ago, I turned my car, a 1995 Ford Taurus, on and everything was working fine and then it was almost as if the car had stalled, but it was still driving. The radio turned off, the power steering turned off, but when I shut it off and turned it back on, everything worked fine. Until today. I drove it around fine all day,and when I went to my friend's and was about to leave, the car wouldn't start. It sounds like the battery is dead, but the lights, radio, windows all worked. There was no clicking sound when I tried to turn the car over either. I'm kind of stumped and can't afford the billions of dollars to get the car looked at right now.