Question about 1993 Plymouth Acclaim

1 Answer

Driving on highway slowed down for toll engine died would not start let set for a few hours it started & ran for a few dayys then same thing happened I replaced fuel pump got it started & ran good for a few minutes but now won't start it is a 93 acclaim 2.5l

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 381 Answers

Most of the time this problem is caused by the pick up coil under the distributor cap. Remove the two screws on the distributor cap set it aside with all the wires still connected. Then remove the rotor( some you can just pull up on to remove it and some have a small Allen screw in them that holds it to the shaft that will have to be loosened to be able to get the rotor off.) Then You will see a black circular plastic thing with wires coming off from it and plug into a plug. unplug the plug or plugs if there is two and get this part from the parts store it is call the pick up coil . putting it back together is just the reverse of taking it apart. Good luck I hope this takes care of your problem.

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. I was driving my 2004 Toyota echo on the a toll highway. I stopped at toll booth to pick up ticket and continued to drive about 5 to 10 miles to the toll pay booth. My car stalled at the toll pay...


Non so to speak without writing a book
You just have to check for codes & start
a logical diagnostic process of testing
You input is critcal for a shop to understand the
reason your there
You do not won't a tunp-up or anything else
You only want the immediate problem diagnosed
& resolved
Becareful not all shop know a lot or can solve all issues
Be part of the solution don't just hand over the key & not
be there sometime due their work on your car
Ask questions & take notes

Aug 12, 2013 | 2004 Toyota ECHO

1 Answer

Have a 03 matrix with a oilpump promblem I think,bought the car last week ran good next day was drive on highway notice oil lap on and noise from motor ,slowed down light went off.Next day change oil and...


Generally three things can turn the light on. First is the sending unit itself if it's going bad. Next is an obstruction of the pump pickup screen (usually hard carbon deposits). Third is worn engine bearings (usually rod bearings). Best way to find the problem is to have someone put a mechanical pressure gauge on the engine and read the actual pressure. If it's low you need to go into the engine to determine why. if it's normal, replace the sending unit. Senders aren't terribly expensive and you could just buy one and replace the one you have, providing the engine isn't tapping or knocking.

Mar 14, 2011 | 2003 Toyota Matrix

1 Answer

What would cause my vue to lose power & die on the highway


that will not make your car to quit running. vue had problem with ignition module. it's easy to replace and it's right on top of the engine. a small, flat almost square silver box on the top of engine.

Apr 19, 2010 | 2003 Saturn VUE

1 Answer

Suburban dies at highway speed


It sounds like a fuel pump getting weak and hot. First check the ground wire at the fuel pump pigtail. and replace the fuel fiter.

Jul 27, 2009 | 2003 Chevrolet Suburban 1500

2 Answers

My sons 1990 626 ran great. I change the oil and reconnected the speedometer cable that had vibrated loose. took it for a drive to make sure I didn't have any oil leaks. It ran for about 5 minutes and just...


we'll assume fuel is good..leaving spark and air..and management of systems(computer /sensors)...so the speedo cable was disconnected? try taking it loose again , test drive and report back please

Nov 20, 2008 | Mazda 626 Cars & Trucks

Not finding what you are looking for?
1993 Plymouth Acclaim Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...