Question about 2005 Dodge SRT-4
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if you are just changing the fog light on the lower bumper than get under neath your truck and look up. there should be 2 bolts or screws holding them in place take them out and disconnect your wiring and the light should fall into your hands...
Posted on Aug 02, 2008
SOURCE: 04 Dodge SRT 4 crankshaft sensor
The Crankshaft Position Sensor is located directly next to the starter.
Use a twisting motion when installing the sensor.
Install and tighten the crankshaft position sensor bolt and tighten to 9 N·m (80 ±15 in. lbs.).
Posted on Aug 16, 2008
Have you checked your fuses? If it is not a fuse then take a flathead and gently pry the cover off, remove light and take with you to parts store for replacement comparison, replace light same way other came out and replace cover. Check your owners manual for specific fuse locations.
Posted on May 17, 2009
The clear lenses will pop out on the side that you push to turn them on if you gently pry on them with a small screwdriver .Then you can easily remove the bulb and replace it.
Posted on Nov 23, 2009
Tips for a great answer:
Oct 08, 2016 | 2002 Dodge Neon
Jan 10, 2016 | 2005 Dodge Neon
Feb 03, 2011 | 2005 Dodge SRT-4
Apr 22, 2010 | 2005 Dodge Neon
Dec 17, 2009 | 2005 Dodge SRT-4
Dec 15, 2009 | 2005 Subaru Forester
Nov 05, 2017 | 2005 Chevrolet Colorado
Jul 14, 2009 | 2005 Honda Odyssey
Apr 14, 2012 | 2005 Dodge SRT-4
358 people viewed this question
Usually answered in minutes!