Question about Mitsubishi Galant

1 Answer

I cannot change gears after driving the 72000km mileage japan assembled mistubishi galant vehicle for 460km.i had to stop,switch of the engine and wait for a while to change the gears and proceed.After a few kilometres i would not change down or up.

Posted by on

  • Jeffrey Turcotte
    Jeffrey Turcotte Mar 12, 2011

    Hi, check the transmission for adequate lubricating oil. There is a filler plug on the side of the transmission. Remove the plug and add transmission lube (SAE 75W-85W, or 75W-90W conforming to API specifications GL-4 or higher) until the fluid is up to the level of the hole, then replace the plug. Note, if the transmission was low on oil, it probably has a leak and may have been damaged by running without adequate lubrication.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Check the clutch assembly, to see if it works.

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont shift from 2nd gear


First off , did you check fluid level ? any lights lit on the instrument cluster, check engine ? How many miles on It ? Ever change the fluid an filter ? can you manually shift through the gears.
DEFINITION: The transmission only provides first and second gear in Drive range. The shift pattern as the vehicle accelerates from a stop is 1-2-2-1. First gear ratio is 2.921:1 and second gear ratio is 1.568:1.
Control Valve Body Assembly
?€¢
A faulty 2-3 shift solenoid valve assembly (315B) is stuck On.


?€¢
Debris is found in the control valve body (301) or the control valve body spacer plate and gasket assembly (396

Jan 14, 2015 | 2004 Buick Rendezvous

1 Answer

Engine Smoke from exhaust with foul smell


four cylinder?

It is not uncommon for these engines to start to "burn" oil. Check the oil level and confirm that it is low. If it is make sure to top it off and monitor the level.

Next time you change oil try using a oil designed for high mileage vehicles. We have been using Mobil High Mileage at the shop with pretty good results on higher mileage engines with oil consumption issues. We have have several of the same vehicles as your use the product and it has helped them as well. It can't hurt to give it a shot.

Mar 08, 2012 | 1998 Mitsubishi Galant

2 Answers

I have 11 year old Daewoo matiz SG car. Run only 72000km. Now the problem is if switch on the AC , the car will not take lod if travel four peoples if the car in First gear also can not able to drive. The...


Did you ever check your spark plug. Change all 4 and your high tension wire might also defective. If your already done this procedure then your clutch might be worn out. This mean your clutch is sliding. Or your engine need tune up means need adjustment on the valve inside the engine

Sep 08, 2011 | Daewoo Lanos Cars & Trucks

2 Answers

I have a 2003 mitsubishi galant, 4 cyl. whenever i take off it goes really slow like it doesnt want to change gears. (automatic) i had the trans checked & they said it's ok. could it be a fuel...


I have a similar problem...when at a stop it jerks in hesitation sometime feeling as if it wants to stall. It also does this when accelerating from stop...it has completely stalled out once when accelerating after switching from reverse to drive, but started right away.

Feb 14, 2011 | 2003 Mitsubishi Galant

1 Answer

What would be the reason for my 02 mistubishi galant to have a check engine light on at 148597 miles


about 60 reasons to be precise ,ask a local mechanic to check it out for you

Oct 12, 2010 | 2002 Mitsubishi Galant

1 Answer

Can I repair a idle control valve for a mistubishi spacewagon 97 (the same control than in Galant 97)


i woulnt have thought so u can remove it and try cleaning itshould go in and out and move when u start engine

Sep 27, 2009 | 1997 Mitsubishi Galant

3 Answers

Temp gauge normal when driving but overheats at a stop


how is the gas mileage.... possible catalitic converter is plugged. Is the check engine light on. or service engine soon?

let me know

Jun 16, 2009 | 2003 Mitsubishi Galant

1 Answer

2000 mistubishi galant es idling rough seriously


Idling problems may be cause buy a number of issues.  You may check out the fast idle control valve and PCV if they would need cleaning.  You can check out the timing it may be advanced, that is why you feel that the car runs hard.

Jun 13, 2009 | 2000 Mitsubishi Galant

2 Answers

How do i reprogram the computer on my 2002 xl7


Try this relearn procedure hopefully it will help

Vehicles equipped with engine or transmission computers may require a relearn procedure after the vehicle battery is disconnected. Many vehicle computers memorize and store vehicle operation patterns for optimum driveability and performance. When the vehicle battery is disconnected, this memory is lost. The computer will use default data until new data from each key start is stored. As the computer memorizes vehicle operation for each new key start, driveability is restored. Vehicle computers may memorize vehicles operation patterns for 40 or more key starts. Customers often complain of driveability problems during the relearn stage because the vehicle acts differently then before being serviced. Depending on the type of vehicle and how it is equipped, the following complaints (driveability problems) may exist:

Harsh Or Poor Shift Quality
Rough Or Unstable Idle
Hesitation Or Stumble
Rich Or Lean Running
Poor Fuel Mileage

These symptoms and complaints should disappear after a number of drive cycles have been memorized. To reduce the possibility of complaints, after any service which requires battery power to be disconnected, vehicle should be road tested.

Vehicle Preparation

Ensure all components are connected. Ensure transmission fluid level is correct. Warm engine to normal operating temperature. If vehicle has been repaired, perform KOEO and Continuous Memory Code Self-Test and ensure fault codes are not present.

Computer Relearn Procedures

Idle Relearn Procedure

Place automatic transmission in Park or manual transmission in Neutral position. Ensure the emergency brake has been set and all accessories are turned off. Start engine and bring to normal operating temperature. Allow manual transmission vehicle to idle in Neutral for one minute. Allow automatic transmission to idle in Neutral for one minute and then to idle in Drive for one minute. Once initial relearn is complete, process will be completed during normal driving. Always complete the procedure before returning the vehicle to the customer.

Drive Cycle Test (AOD-E, AXOD & AXOD-E TRANSAXLES)

With transmission gear selector in Overdrive, moderately accelerate vehicle to 50 MPH for a minimum of 15 seconds. Transmission should be in 4th gear. While holding speed steady, lightly apply and release brake for about 5 seconds. Stop and park vehicle for a minimum of 20 seconds with transmission gear selector in Drive. Repeat procedure 5 times. Always complete the procedure before returning the vehicle to the customer.

Drive Cycle Test (E4OD)

With transmission gear selector in Drive, press Overdrive Cancel Switch (LED should light). Moderately accelerate vehicle to 40 MPH for a minimum of 15 seconds (30 seconds above 4000-ft. elevation) Transmission should be in 3rd gear. While holding speed steady, press Overdrive Cancel Switch (LED should go off) and accelerate from 40 MPH to 50 MPH. Transmission should shift from 3rd gear to 4th gear. Hold speed steady for 15 seconds. While holding speed steady, lightly apply and release brakes enough to turn brake lights on. Maintain 50 MPH for about 5 seconds. Stop vehicle for a minimum of 20 seconds with transmission gear selector in Drive. Repeat procedure 5 times. Always complete the procedure before returning the vehicle to the customer.

Mar 26, 2009 | 1998 Lincoln Mark VIII

1 Answer

Hey


Gas pump, timing belt, coil Distributor pickup coil, a number of things, look for the 3 elements, gas spark and air

Jan 24, 2009 | 2002 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...