Question about 2000 Hyundai Accent

2 Answers

The central locking is working by key but has stopped working by remote control. The remote control can be armed or disarmed only. How can I fix it?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I suffer from the same problem

Posted on May 06, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 166 Answers

Try changeing the battery in the remote could be low

Posted on Mar 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service immobilizer light is on an car wont start. It's a 2004 Pacifica


You are using an outdated browser. Please upgrade your browser to improve your experience.
Electrical • Vehicle Theft Security • Description Report a problem with this article

DESCRIPTION

VEHICLE THEFT SECURITY SYSTEM

The Vehicle Theft Security System (VTSS) is designed to protect against whole vehicle theft. The system monitors vehicle doors, and ignition action for unauthorized operation.
The alarm activates:
  • Sounding of the horn
  • Flashing of the headlamps/park/tail lamps
  • An engine kill feature (with SKIS)

SENTRY KEY IMMOBILIZER SYSTEM

The Sentry Key Immobilizer System (SKIS) is designed to provide passive protection against unauthorized vehicle use by disabling the engine, after two (2) seconds of running, whenever an invalid key is used to start the vehicle. The SKIS is active whenever the ignition is on and does not require any customer intervention. The primary components of the system are the Sentry Key Remote Entry Module (SKREEM), Sentry Key (ignition key with a transponder molded into the head), indicator light, Body Control Module (BCM), and the Next Generation Controller (NGC). The SKREEM is mounted on the ignition switch/lock cylinder assembly with the molded, integral antenna mounted around the ignition housing. The indicator light, is located instrument panel switch pod, just to the right of the instrument cluster.
Electrical • Vehicle Theft Security • Operation Report a problem with this article

OPERATION

VEHICLE THEFT SECURITY SYSTEM

Upon failure of proper SKREEM communication to the Next Generation Controller (NGC), the NGC will shut off fuel after two seconds of run time. The engine will not re-crank on the key cycle that the failure occurred, a full key down sequence must be performed for the engine to crank again. After six consecutive fuel shut-offs, the engine will no longer crank on subsequent key cycles. The failure must be corrected and a valid communication process between the SKREEM and the NGC must occur for the engine to crank and start again.
The electronics for the VTSS are part of the Body Control Module (BCM). The system is armed when the vehicle is locked using the:
  • Power door lock switches (with any door ajar)
  • Remote Keyless Entry transmitter.
  • Door Cylinder Lock Switches.
For vehicles equipped with SKIS, the doors do not have to be locked to enable the fuel shut off feature.
After the vehicle is locked and the last door is closed, the set LED indicator in the instrument panel switch pod will flash quickly for 16 seconds, indicating that arming is in progress. If no monitored systems are activated during this period, the system will arm and the LED will flash at a .5 Hertz (Hz) rate. If the liftgate is open, the LED will change its flash rate.
This indicates that the system is armed. If fault is detected on the driver key cylinder input, the indicator LED will remain solid during the arming process, although the system will still arm. If the indicator LED does not illuminate at all upon door closing it indicates that the system is not arming.
Passive disarming occurs upon normal vehicle entry by unlocking either door with the ignition key/remote transmitter. This disarming will also halt the alarm once it has been activated.
A tamper alert exists to notify the driver that the VTSS had been activated. This alert consists of 3 horn pulses when the vehicle is disarmed.
NOTE: The VTSS will not arm by pushing down the door lock mechanism. This will manually override the system.
For Door Cylinder Lock Switch service, (Refer to 8 - ELECTRICAL/POWER LOCKS/DOOR CYLINDER LOCK/UNLOCK SWITCH - REMOVAL).
If the VTSS is triggered, the horn will pulse, headlamps/marker lamps will flash, and the VTSS warning lamp will flash. If BCM determines the threat to be false and the VTSS is not triggered again, the system will shut down and rearm itself after three minutes. If a trigger is still active, the alarm will continue for an additional 15 minutes without the horn. The VTSS monitors the passenger compartment.
NOTE: System will not arm if passenger compartment is not secure.

ARMING THE VTSS - METHOD A

  1. With the key removed from the ignition lock and any door open (excluding liftgate), actuate one of the following:
  • Power door lock button to LOCK,
  • Key fob LOCK button
  • Driver door lock key cylinder to locked position.
  • Close all opened doors. Liftgate can remain open.
  • After the last door is closed, an arming time-out period of sixteen seconds will start, then the VTSS will become armed.

    ARMING THE VTSS - METHOD B

    Actuating the key fob transmitter LOCK button, key locking the front doors with the doors closed and the ignition locked will begin the arming time-out period. If method A, 16 second time-out sequence was in process when method B was actuated, the 16 second time-out will restart from the time of the second actuation.
    If the security lamp does not illuminate at all upon final door closure, it indicates that the system is not arming.
    The current VTSS status armed or disarmed shall be maintained in memory to prevent battery disconnects from disarming the system.

    TRIGGERING THE VTSS

    After the VTSS is armed, the following actions will trigger the alarm:
    • Opening any door (excluding liftgate).
    • Turning the ignition to the RUN position.
  • NOTE: When the VTSS is ARMED, the interior power door lock switch ?UNLOCK? will be disabled until the vehicle is disarmed.
    CAUTION: The VTSS indicator LED will trigger and engine will continue to run if the vehicle is equipped with SKIS and the proper key is used to start the vehicle. This condition will occur if the VTSS has been triggered. If valid key is used, VTSS will disarm.

    CENTRAL LOCKING/UNLOCKING

    This vehicle theft security system feature allows you lock all the doors with the key by using the drivers door lock cylinder.
    All vehicle doors and liftgate are locked with the first turn of the key to the LOCK position from the drivers door. A double activation feature of central unlocking requires you to turn the key in the door lock cylinder to the unlock position two times within two seconds to UNLOCK all vehicle doors at once.
    The first turn of the key in the door lock cylinder will disarm the system (the driver door cylinder lock switch connected to the back of the driver door lock cylinder) and unlock your drivers door. The second actuation within two seconds will then unlock all doors and the liftgate.

    SENTRY KEY IMMOBILIZER SYSTEM

    The SKIS includes keys from the factory which are pre-programmed. Each SKIM will recognize a maximum of eight Sentry Keys. If the customer would like to own additional keys other than those provided with the vehicle, they can be purchased from any authorized dealer. These keys must be programmed to the SKREEM on the vehicle in order for the system to recognize them as valid keys. This can be done by the dealer with a DRB III® scan tool or by a customer if this feature is available in their market and they have two (2) valid keys already available to them. The SKIS performs a self-test each time the ignition switch is turned to the ON position and will store Diagnostic Trouble Codes (DTC's) if a system malfunction is detected. The SKIS can be diagnosed and any stored DTC's can be retrieved using a DRB III® scan tool as described in the appropriate Body Diagnostic Procedures manual.
    With the light being on there is a code stored in the computer that controls anti-theft , Your best bet would be to take your vehicle to the dealer !




    Aug 20, 2016 | Cars & Trucks

    2 Answers

    My Mitsubishi colt CZ1 (07 plate) has problem with cental locking. I can manually central lock but with the remote it locks/unlocks all the doors except the driver's door. Please help. Thanks


    Central locking works by way of little electric motors that engages and disengages the door lock. The drivers door has an additional set of contacts in the actuator which signal the controller when it changes position. The controller activates the servo motors when a signal is received from the receiver or from the drivers door servo motor. So in your case I suspect the motor part of the drivers door actuator is done for.
    To replace you will have to remove the inner driver's door panel to get at the actuator. The actuator itself cannot be repaired and needs to be replaced as a unit.

    Apr 29, 2011 | 2006 Mitsubishi Colt

    1 Answer

    My 2001 tahoe alarm keeps "auto" arming itself after about 30 seconds. How do I stop it from "auto" arming? Its driving me crazy


    this alarm works with the remote and the key, if you lock with the key it arms if you lock with remote it arms,when you unlock it it should disarm, if your having a problem with it not working try the pass/side lock with key, that should shut it down but if it keeps rearming without locking doors then it may be aftermarket, also in your manualy it will show you that some factory alarms are also self arming this is programed through the cluster, using the buttons on the dash, you scroll through the options and shut off auto arming, this is done the same way you scroll for mileage or trip time or oil change life. hope this helps.

    Sep 21, 2010 | 2001 Chevrolet Tahoe

    1 Answer

    I have a viper alarm on my car that wont shut off nor i cant start the car..and i have tried the button under my dash, how Can i shut it off??


    was it a professional or shade tree install? the following is off vipers website:
    disarming without a remote control
    This feature allows you to disarm the security system without the
    Remote Control should it be lost, damaged, or disabled. In order to
    disarm the system without a remote remote control, you must have
    the vehicle’s ignition key and know where the Valet button is
    located. Be sure to check with the installer for the location and the
    number of presses of the Valet button required to disarm the system.
    To disarm the security system,
    turn the ignition to the ON position.
    Press the Valet button the
    preset number of times (one to
    five times) within 15 seconds. After five seconds the system will
    disarm. If the system does not disarm, you may have waited too long;
    turn the ignition off and on and try again.
    if that doesn't work try this other

    valet mode
    You can prevent your security system from automatically arming
    and triggering by using Valet Mode. This is very useful when
    washing the vehicle or having it serviced. In Valet Mode, the
    security system will not arm, even with the Remote Control, but
    all convenience functions (door locks, trunk release, etc.) will
    continue to work normally.
    To enter or exit Valet Mode:
    1. Turn the ignition on.
    2. Turn the ignition off.
    3. Press and release the Valet
    button within 10 seconds.
    The status LED will light solidly if you are entering Valet Mode,
    and it will go out if you are exiting Valet Mode.

    May 08, 2010 | 1994 Honda Civic

    1 Answer

    Neither key fob is working to open the car with


    open door. when alarm goes off put key in ignition and turn it on start car. this should disarm the factory alarm.

    Feb 08, 2010 | 2005 Chrysler Crossfire

    3 Answers

    Yaris 2003 remote control lock problem


    You need to reprogram the remote. Please se this website:
    http://toyotaownersclub.com/forums/index.php?showtopic=85266

    Oct 08, 2009 | 1998 Toyota Corolla

    1 Answer

    Remote not working after disconnecting battery


    If car Convenience Control Module(module that control key remote) lose power- remote adaptation to the car will be lost. This apply to some Audi models.
    What you can try to do is:
    1. Disarm alarm manually by opening door lock with the key
    2. Put key into ignition and turn to on position (don't start the car)
    3. Press few times remote button (with the ignition in on position)
    Depends on your year model it my work (works on the newer models), if not you have to go to the dealership to program your keys.
    Good luck!
    Grzesiek

    May 11, 2009 | 2003 Audi A4 Cabriolet

    1 Answer

    Replaced the alternator, now anti theft won't disable


    The ignition lock anti-theft switch (19A438) detects if the ignition key cylinder is broken or "slam pulled" during a theft. The ignition lock anti-theft switch is always monitored by the remote anti-theft personality (RAP) module. This allows the alarm system to be triggered in the case that the ignition lock anti-theft switch detects tampering of the ignition key cylinder (even in the event that the alarm is not active at the time).
    Refer to the Section 501-14B for more details on the keyless entry remote transmitter (15K601).
    The door open warning lamp switch (14018) communicates to the RAP module through the generic electronic module (GEM). This input to the RAP will cause the anti-theft alarm to be sounded if the anti-theft alarm was armed.
    The door disarm switches are assembled into both LH and RH lock sets. The door disarm switch must be triggered before the mechanical lock unlocks. This is to prevent the anti-theft alarm from activating when it should have been disarmed.
    The RAP module controls the anti-theft system and is the brains of the keyless entry system. The RAP module communicates with the GEM to request that the interior lights be turned ON/OFF with use of the keyless entry remote transmitter, and the GEM communicates to the RAP to inform when the door is opened. Refer to Section 418-00 for inter-module communication.
    The RAP module has three wire connectors attached to it:
    • The antenna for the keyless entry remote transmitter.
    • 26 circuit connector (C256).
    • 22 circuit connector (C257).
    In addition to the perimeter alarm that uses the door open warning lamp switch, the RAP module also uses the ignition lock anti-theft switch and the autolock/relock feature to prevent theft of the vehicle. For a full description of the autolock/relock system, refer to Section 501-14B .
    The THEFT LED is found on the instrument panel between the tachometer scale and the needle pivot point. The LED is illuminated during prearming and flashes when armed or triggered.
    Prearming and Arming the System
    The system can be armed if:
    • The ignition is OFF.
    • The PANIC alarm is OFF.
    • All doors are closed.
    There are two ways to prearm the system:
    • Press the LOCK button on the transmitter.
    • Open a door, press the power door lock button and close the door.
    After 30 seconds the system will be armed and the theft indicator in the cluster will flash every two seconds.
    Disarming an Untriggered System
    An armed system will be disarmed with one of these valid actions:
    1. Pressing the UNLOCK button on the transmitter.
    1. Placing a key in the door and turning to UNLOCK.
    1. Turning the key to RUN or ACC.
    The anti-theft alarm can be triggered by the following conditions:
    • The ignition cylinder is damaged with or without the RAP being armed.
    • A door is opened without disarming the armed RAP module.
    The remote transmitter can activate a panic alarm which is similar to an anti-theft alarm, but does not deactivate the starter or cause the theft indicator to flash.
    Disarming a Triggered System
    If the system has been triggered, (the horn honks, the lights flash, and an external starter interrupt relay is engaged), the system can be disarmed by:
    1. Pressing the UNLOCK or PANIC button on the transmitter.
    1. Putting a key in the door and unlocking the door.
    1. Turning the ignition to RUN/ACC (Turning the key to RUN/ACC will not disarm an alarm that has been triggered by the ignition lock anti-theft switch.).

    Apr 10, 2009 | 1997 Ford F150 Regular Cab

    1 Answer

    I have a bmw 316ti compact on a 52 reg. The central locking gave up working 3mths ago and we was useing the key to lock and unlock the car,then all ov a sudden we couldnt start the car.when you put the...


    with any BMW they have their problems, one is the central locking/immobilizer, the central locking is linked into the immobilizer and vice versa, the immobilizer takes it signal to disarm from the central locking and the ignition key ring. (chip in the key) if one of these starts to play up it has loads of consequences this being one of them. they all need to work together for the system to work properly. you would need to read the alarm and immobiliser codes using an ob2 tool that can detect them, and find the fault some problems it can be the drivers door sensor in the lock this is the main door as its drivers side and it controls all other doors on the central locking. if the switch is worn in any of it movements the system will not know the door has been opened, this does not work on the interior light as that is a switch in the door frame. the door lock is lock unlock and deadlock with key with remote fob its also arm disarm alarm and immobiliser. i have seen in some models there is a sensor auto lock so when you walk away with the key the doors lock automatically all lease parts work together. any one having a problem can cause no signal to be sent to the others in the system to start engine .

    Jun 22, 2017 | BMW 318 Cars & Trucks

    Not finding what you are looking for?
    2000 Hyundai Accent Logo

    368 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    75077 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7768 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...