Question about 1993 Jeep Wrangler

1 Answer

Have a 93 jeep wrangler s yj. got hard doors on it and have replace the inside door handles. doors still won't open from the inside, have to roll the window down and open from outside. trying to find the "guts" to replace inside the door panel but do not know what they are called or what to look for. can you help?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 166 Answers

Probly has bad door laches , its an old jeep maybe spay some oil up in them will help them let loose when they should

Posted on Mar 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I just bought a 1994 Jeep YJ (Sahara). The doors do not fit right. Is this a common problem? How do i fix? the pins seem to be straight, and the hinges have not moved (no sign of damage or...


Hello, if the doors aren't closing right you can loosen the bolt that the doors latch onto, it is a torx, then move it up or down so that it closes well. Otherwise you can bend the door pins slightly. What can happen is that the body shifts with the removal of the hard top or if someone unbolted the roll cage to put down the front wind screen. Get the doors going good by adjusting the bolt that the door jam latches onto to keep the door closed. Then tighten everything good. It is common that they don't close right. Also, while you're at it, pull up the carpet where the seatbelts are in front and look for rust on the floor. YJ's are know for the seat belt ripping out of a rusted floor and the passengers going through the windshield. But I still love jeeps. Cheers bro.

Mar 18, 2010 | 1994 Jeep Wrangler

1 Answer

1995 Jeep YJ with a new engine. No power going to coils.


sounds like you are working on a car FSM free?
why do that?
95 YJ
early wrangler
i have 95 yj fsm and 93, the 93-95 are a year class range.
very simular.
here is a free 93 fsm with full schematics in chapter 8w
wiring chapter, clik
pdf 76 is page YJ 19 actual
and as you can see its cave man simple 2 wires.
minus to ECU ignitor driver. transistor (inside ecu)
and
+ goes to
a142 sheet 5 (pdf 62)

im not sure what part A<B<C is, a fuseable link, is my guess
and is blown. but that be a bingo spot for sure.
the full manual is there.
see spark chapter.
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

posted over 100 times, this link, its not new.

Feb 13, 2010 | 1995 Jeep Wrangler

1 Answer

HOW TO INSTALL WRANGLER PADDLE HANDLES ON 1990 FULL METAL DOORS


Remove the door panels on the inside of the door. Roll the window up so you can reach the bolts that hold the paddles onto the door skin.

Dec 03, 2009 | 1990 Jeep Wrangler

1 Answer

How do I install a driver dide door handle on my


Inside handle, no, outside yes, to access nuts/bolts on back side.

Jul 31, 2009 | 1993 Jeep Wrangler

1 Answer

Soft top-1993 Jeep Wrangler YJ


OK I have a yj and you start from the windshield put the snaps/or what ever yours is on the top of the doors then down the side or the doors then under the back side window then around the curve and this is the hardest part then your tailgate also make sure your bars on the inside are loseuntil the top is on then thighting those bars and you should have a nice tight top but belive me it is hard and you might need a flathead screw driver for the corners. Good luck and a jeep wave to you!

Apr 03, 2009 | 1993 Jeep Wrangler

2 Answers

93 jeep door lock Broken


It might an easy fix...

I had the same problem and it ended up that it only was a metal rod that was unhook from mechanism...

-undo your inside panel by pulling on it
- check the mechanism...

Be careful there is some small plastic pieces that breaks easily after 15 years of life!

hope this helps!

Mar 27, 2009 | 1993 Jeep Wrangler

1 Answer

The passenger door will not open 1993 Jeep Wrangler


assuming that this jeep has not been wrecked recently, the only way to get that door open is to remove the door panel while the door is closed, at least enough to reach the door latch inside the door, once reached you can operate it and release it to open the door, I will tell you that the likely hood of damage to the door panel will probably occur, I have had this problem before and I had to cut a hole in the panel reach in and open the door, sorry it can't be simpler. if you feel the latch operating and you have recently ran into something, try pull the door handle from inside while pushing the door open

Mar 23, 2009 | 1993 Jeep Wrangler

1 Answer

Jeep 1992 yJ Outside Door Handle


ok, the inside panel is cardboard with faux leather. remove the screws holding on the inside handle and the frame of the doorlatch.

there is a plastic joint that connects the two rods that actuate and open the door. the rods are bent at the end to slip into the white plastic joint. this design is stupid and often times that joint can break, or the rods fall out. solution is to reattach them together and wrap mechanics wire or bend the very ends of the rods so they wont come out.

its something i cant really explain, but the design is straight forward. also, keep track of the threads on the rod that connects to the claw that meets the striker on the frame of the jeep. if for any reason its not adjusted properly, it will not latch properly.


Mar 01, 2009 | 1992 Jeep Wrangler

1 Answer

Jeep Wrangler YJ : difficult to close doors when cold weather


Have you tried spraying WD-40 in behind and all around , work it, then spray with lithium grease?

Jan 07, 2009 | 1993 Jeep Wrangler

1 Answer

98 Jeep Wrangler door handle won't open door


there is a metal bar inside that clips into the handle they come off all the time there is a plastic clip that hold the 2 together it most likely has fallen off and into the bottom of the door you can put it back together easily if clip cannot be found you can buy them at local parts store for a couple bucks..hope this helps

Nov 21, 2008 | 1998 Jeep Wrangler

Not finding what you are looking for?
1993 Jeep Wrangler Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...